Loading ...
Sorry, an error occurred while loading the content.

18193RE: [aprsisce] Trouble with TS-2000 setup

Expand Messages
  • Walter Dutcher
    Jun 1, 2012

      Got it, had to power cycle the TS-2000 and start over – working now.  Thanks for the help!


      From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf Of Walter Dutcher
      Sent: Friday, June 01, 2012 11:59 AM
      To: aprsisce@yahoogroups.com
      Subject: RE: [aprsisce] Trouble with TS-2000 setup



      WOW, quick reply – Thanks.

      I started hyperterminal and apparently the TS-2000 is not decoding any packets – nothing seen and lots of audible “traffic”.  I shut down aprsis before starting hyperterminal, do I need to re-initialize the TS-2000 with any KISS setup commands from hyperterminal?


      TS-2000 menus:

      46 Main/Sub band: Built in TNC=Sub

      47 Data transfer rate=Built in TNC=1200

      48 DCD sense=TNC Band

      50A Packet Filter Bandwidth=Off

      Input and output level set =4

      55 Packet Operation=On

      56 Com Connector Parm=57600


      From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf Of Lynn W Deffenbaugh (Mr)
      Sent: Friday, June 01, 2012 11:48 AM
      To: aprsisce@yahoogroups.com
      Subject: Re: [aprsisce] Trouble with TS-2000 setup



      That "error" may be normal.  If you hook up a terminal emulator, can you see packets being received by the TS-2000?  If not, then you need to get it decoding before you'll have any joy with APRSISCE/32.  If you CAN see packets being decoded, then watch it for a while to determine the approximate rate at which they are received.  Knowing that, then fire up APRSISCE/32 and watch your trace log for at least twice that long and you should see packets coming through.  Make sure the <YourPortName> log is enabled, or the packets may not be shown.

      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

      PS.  The "error" indicates that the final RESTART command is not expecting an echo of the command which APRSISCE/32 receives after having switched internally to KISS mode which then complains about the "missing leading <C0>", a non-fatal issue which should go away when the TS-2000 decodes a real packet and sends it to APRSISCE/32 in a KISS wrapper.

      On 6/1/2012 11:40 AM, Walter Dutcher wrote:

      I'm having trouble getting my TS-2000 to comunicate with aprsisce.  Can anyone see what I'm doing wrong?  I'm trying KISS, seems to be OK until it hits the restart command on opencmd...


      here's a snip from the log:

      TS-2000:2012-06-01T15:29:56.678 Restarting Reader...
      TS-2000:2012-06-01T15:29:56.678 CpReader Running on COM8:57600,N,8,1 (6 OpenCmds, 2 CloseCmds)
      TS-2000:2012-06-01T15:29:56.678 Opening COM8:57600,N,8,1
      TS-2000:2012-06-01T15:29:56.678 Opening COM8 with 4 Args
      TS-2000:2012-06-01T15:29:56.688 COM8:Packet Length 64 Version 2
      TS-2000:2012-06-01T15:29:56.688 COM8:ServiceMask 0x1 Reserved1 0x0
      TS-2000:2012-06-01T15:29:56.688 COM8:MaxQueue Tx 0 Rx 0 Baud 268435456
      TS-2000:2012-06-01T15:29:56.688 COM8:Provider SubType 1 Capabilities 0xFF
      TS-2000:2012-06-01T15:29:56.688 COM8:Settable Params 127 Baud 0x1006FFFF Data 0xF StopParity 0x1F07
      TS-2000:2012-06-01T15:29:56.688 COM8:Current Queue Tx 0 Rx 4096
      TS-2000:2012-06-01T15:29:56.688 COM8:Provider Specifics 0x0 0x0
      TS-2000:2012-06-01T15:29:56.688 CpOpen:Port COM8 57600,N,8,1 !CTSFlow !DSRFlow !OutXon(2048) !InXoff(512) DTR_ENABLE !DSRSense RTS_ENABLE
      TS-2000:2012-06-01T15:29:56.688 Opened COM8:57600,N,8,1, Flushing 0 in TransmitQueue, Sending 6 OpenCmds
      TS-2000:2012-06-01T15:29:56.688 Command[3]:^M~
      TS-2000:2012-06-01T15:29:56.688 Output[1]:<0D>
      TS-2000:2012-06-01T15:29:56.718 CmdResp[6]:<0D 0A>cmd:
      TS-2000:2012-06-01T15:29:56.718 Command[3]:^M~
      TS-2000:2012-06-01T15:29:56.718 Output[1]:<0D>
      TS-2000:2012-06-01T15:29:56.738 CmdResp[6]:<0D 0A>cmd:
      TS-2000:2012-06-01T15:29:56.738 Command[9]:XFLOW OFF
      TS-2000:2012-06-01T15:29:56.738 Output[10]:XFLOW OFF<0D>
      TS-2000:2012-06-01T15:29:56.788 CmdResp[33]:XFLOW OFF<0D 0A>XFLOW    was OFF<0D 0A>cmd:
      TS-2000:2012-06-01T15:29:56.788 Command[10]:FULLDUP ON
      TS-2000:2012-06-01T15:29:56.788 Output[11]:FULLDUP ON<0D>
      TS-2000:2012-06-01T15:29:56.828 CmdResp[21]:FULLDUP ON<0D 0A>?EH<0D 0A>cmd:
      TS-2000:2012-06-01T15:29:56.828 Command[7]:KISS ON
      TS-2000:2012-06-01T15:29:56.828 Output[8]:KISS ON<0D>
      TS-2000:2012-06-01T15:29:56.878 CmdResp[31]:KISS ON<0D 0A>KISS     was OFF<0D 0A>cmd:
      TS-2000:2012-06-01T15:29:56.878 Command[7]:RESTART
      TS-2000:2012-06-01T15:29:56.878 Output[8]:RESTART<0D>
      TS-2000:2012-06-01T15:29:57.229 KISS:Missing Leading C0[9]:RESTART<0D 0A>
      TS-2000:2012-06-01T15:30:26.971 Terminating after 30048 msec vs 30000 Quiet
      TS-2000:2012-06-01T15:30:26.971 Closing COM8:57600,N,8,1
      TS-2000:2012-06-01T15:30:26.971 Command[13]:^192^255^192~
      TS-2000:2012-06-01T15:30:26.971 Output[3]:<C0 FF C0>
      TS-2000:2012-06-01T15:30:26.971 Command[6]:TN 2,0
      TS-2000:2012-06-01T15:30:26.971 Output[7]:TN 2,0<0D>
      TS-2000:2012-06-01T15:30:27.001 CmdResp[1]:<0A>
      TS-2000:2012-06-01T15:30:27.192 CmdResp[156]:<0A 0D 0A 0D 0A 0D 0A>bbRAM loaded with defaults<07 0D 0A 0D 0A 0D 0A 0D 0A>TASCO Radio Modem<0D 0A>AX.25 Level 2 Version 2.0<0D 0A>Release 09/15/99 2Chip ver 2.00<0D 0A>Checksum $CF<0D 0A>cmd:TN 2,0<0D 0A>?EH<0D 0A>cmd:




      Walter Dutcher N2ZVP

      Beechwood Development






    • Show all 9 messages in this topic