Loading ...
Sorry, an error occurred while loading the content.

1634Re: [aprsisce] Re: Kiss Mode for RF

Expand Messages
  • kd4dra@yahoo.com
    Jun 3, 2010
      Should transmit be disabled on apris if the tt4 is transmItting
      Rick

      Sent from my Verizon Wireless BlackBerry


      From: "Fred Hillhouse" <fmhillhouse@...>
      Date: Thu, 3 Jun 2010 10:21:14 -0400
      To: <aprsisce@yahoogroups.com>
      Subject: RE: [aprsisce] Re: Kiss Mode for RF

       

      When you are set up like this, does the TT4 forward GPS sentences as well? I
      don't think it does. So your position on the map will only change when a
      beacon is sent. It may not be important to you that you know where you are
      on the map.

      Best regards,
      Fred


      > -----Original Message-----
      > From: aprsisce@yahoogroups.com
      > [mailto:aprsisce@yahoogroups.com] On Behalf Of Lynn W. Deffenbaugh
      > Sent: Thursday, June 03, 2010 10:03
      > To: aprsisce@yahoogroups.com
      > Subject: Re: [aprsisce] Re: Kiss Mode for RF
      >
      > Yes, with the splitter and enabling PKTOCOM, and the TT4 in
      > KISS, you should be able to use a USB or Bluetooth to serial
      > on the splitter cable and run APRSISCE/32 on the other end.
      > PKTOCOM tells the TT4 to send all generated packets to the
      > KISS port as well as out the RF so APRSISCE/32 will get an
      > input of your TT4s current position even if it didn't receive
      > a digipeat of your update. Then just track the TT4
      > callsign-SSID and enable Messages / My Messages and you
      > should be good to go. You'll probably want to turn off
      > beaconing in APRSISCE/32 since it still won't have a GPS feed
      > telling it where it actually is.
      >
      > If you don't have mobile Internet, you'll also want to
      > disable APRS-IS and OSM Tile fetching and do a bit of pre-fetching
      > (http://aprsisce.wikidot.com/map-prefetch) before going
      > mobile. If you'll be setting this up for long term use,
      > you'll probably also want to disable tile purging
      > (http://aprsisce.wikidot.com/moving-osmtiles).
      >
      > If there's anyone out there running in this mode, what did I miss?
      >
      > Lynn (D) - KJ4ERJ
      >
      > kd4dra@... wrote:
      > >
      > >
      > > Can I do the same with laptop I have the splitter cable
      > from byon Rick
      > >
      > > Sent from my Verizon Wireless BlackBerry
      > >
      > >
      > ----------------------------------------------------------
      > > --
      > > *From: * "Lynn W. Deffenbaugh" <kj4erj@...>
      > > *Date: *Thu, 03 Jun 2010 09:27:21 -0400
      > > *To: *<aprsisce@yahoogroups.com>
      > > *Subject: *Re: [aprsisce] Re: Kiss Mode for RF
      > >
      > >
      > >
      > > With the right splitter cable and PKTOCOM configured in the TT4
      > > coupled with a Bluetooth to Serial adapter, you can use
      > APRSISCE on a
      > > Bluetooth-capable phone and be able to do APRS over RF via
      > the TT4 as
      > > well as be able to use messaging and mapping of the
      > received stations.
      > > I'm doing a similar thing soon in my car (KJ4ERJ-9) with an OT2m as
      > > soon as I get the right cables fabricated.
      > >
      > > Lynn (D) - KJ4ERJ
      > >
      > > Rick wrote:
      > > > I can't use aprsis on mobile cause only have gps 2 from
      > Byon and no
      > > rs232 port on laptop.
      > > >
      > > > --- In aprsisce@yahoogroups.com
      > <mailto:aprsisce%40yahoogroups.com>,
      > > "Lynn W. Deffenbaugh" <kj4erj@...> wrote:
      > > >
      > > >> I checked your raw packets at http://aprs.fi/?c=raw&call=KD4DRA-9
      > > <http://aprs.fi/?c=raw&call=KD4DRA-9> and
      > > >> I'm not seeing a change in path. The only packets there
      > came from
      > > >> the
      > > >> TT4 directly, not from APRSISCE. Or did you do the test with a
      > > >> different -SSID than -9?
      > > >>
      > > >> Lynn (D) - KJ4ERJ
      > > >>
      > > >> kd4dra@... wrote:
      > > >>
      > > >>> Thanks lynn I did that last night and he still show in the path.
      > > >>> Thanks again
      > > >>> Rick
      > > >>>
      > > >>> Sent from my Verizon Wireless BlackBerry
      > > >>>
      > > >>> ----------------------------------------------------------
      > > >>> *From: * "Lynn W. Deffenbaugh" <kj4erj@...>
      > > >>> *Date: *Thu, 03 Jun 2010 08:29:19 -0400
      > > >>> *To: *<aprsisce@yahoogroups.com
      > > >>> <mailto:aprsisce%40yahoogroups.com>>
      > > >>> *Subject: *Re: [aprsisce] Re: Kiss Mode for RF
      > > >>>
      > > >>>
      > > >>>
      > > >>> Unfortunately, no. There's no provision in APRS to tell
      > a digi to
      > > >>> ignore you if you're using one of it's aliases. The only option
      > > >>> would be to replace the WIDE1-1 with a specific digi's
      > call, but
      > > >>> that would only work while you were within simplex
      > range of that
      > > >>> digi and would hurt big-time when you left the area.
      > > >>>
      > > >>> I did some inquiring about what the digi was doing and it's a
      > > >>> known configuration issue of a certain type of
      > hardware. I'll see
      > > >>> if I can find that response and post it back here later.
      > > >>>
      > > >>> Lynn (D) - KJ4ERJ - Our abilities are only as good as our
      > > infrastructure
      > > >>>
      > > >>> Rick wrote:
      > > >>>
      > > >>>> Hey Lynn
      > > >>>> I sent this digi owner a letter, I copy and pasted your comment
      > > >>>>
      > > >>> about the Wide1 and copy and pasted some of the raw data from
      > > >>> aprs.fi and its still not fixed. Can I block a digi
      > from my path?
      > > >>>
      > > >>>> Thanks
      > > >>>> Rick
      > > >>>>
      > > >>>>
      > > >>>> --- In aprsisce@yahoogroups.com
      > > <mailto:aprsisce%40yahoogroups.com>
      > > <mailto:aprsisce%40yahoogroups.com>,
      > > >>>>
      > > >>> "Lynn W. Deffenbaugh" <kj4erj@> wrote:
      > > >>>
      > > >>>>> Rick,
      > > >>>>>
      > > >>>>> I checked your raw packets this morning and noticed that you
      > > have both
      > > >>>>> APRSIS32 and the TT4 both configured for KD4DRA-9. It
      > is best to
      > > give
      > > >>>>> each and every device and program its own -SSID
      > > >>>>> (http://aprsisce.wikidot.com/ssids) to avoid confusion and
      > > >>>>> provide better problem detection by knowing where various
      > > >>>>> packets are
      > > >>>>>
      > > >>> coming from.
      > > >>>
      > > >>>>> Also, it appears that you've got a split-personality
      > Digi in the
      > > area.
      > > >>>>> Consider the following packets:
      > > >>>>>
      > > >>>>> 2010-05-22 20:37:51 UTC:
      > > >>>>> KD4DRA-9>3TTR9S,KE4CJA-4*,WIDE1,WIDE2-1,qAR,N2VUZ-1:'n,]l
      > > >>>>> <0x1c>v/"6q}TinyTrak4 / 110F 13.5V
      > > >>>>> 2010-05-22 20:38:48 UTC:
      > > >>>>> KD4DRA-9>3TTR9S,KE4CJA-4*,WIDE1,WIDE2-1,qAR,WA4SAS-11:'n,]l
      > > >>>>> <0x1c>v/"6q}TinyTrak4 / 110F 13.5V
      > > >>>>>
      > > >>>>> KE4CJA-4 apparently changed your WIDE1-1 to WIDE1 and
      > insert a
      > > >>>>> used callsign for itself. However, it should have marked the
      > > >>>>> WIDE1 as
      > > used
      > > >>>>> (WIDE1*). With what it did, that packet will only be
      > picked up
      > > >>>>> by an obsolete WIDE digi and until that gets used,
      > the WIDE2-1
      > > >>>>> will be ignored. Your path of WIDE1-1,WIDE2-1 is correct.
      > > >>>>>
      > > >>>>> I then checked the packets directly from KE4CJA-4 and
      > found that
      > > >>>>> its comments claims that it is a WIDEN-N digi, but
      > yet its own
      > > >>>>> path
      > > >>>>>
      > > >>> betrays
      > > >>>
      > > >>>>> it's true obsolescence as it tries to go out via WIDE,WIDE. I
      > > >>>>> don't know if you have contact info for that digi
      > operator, but
      > > >>>>> it would
      > > >>>>>
      > > >>> help
      > > >>>
      > > >>>>> the area if it would get fully WIDEn-N compliant.
      > > >>>>>
      > > >>>>> 2010-05-23 09:46:20 UTC:
      > > >>>>>
      > KE4CJA-4>BEACON,WIDE,WIDE,qAR,AL0I:!3510.93NN08240.93W#PHG6830
      > > >>>>> KE4CJA-4>EM85
      > > >>>>> W-R-T-NC WIDEN-N RICH MTN TRN CNTY
      > > >>>>>
      > > >>>>> Let me know if you can use any more help getting the
      > TT4 working
      > > >>>>> in
      > > >>>>>
      > > >>> KISS
      > > >>>
      > > >>>>> mode. Your raw packets (http://aprs.fi/?c=raw&call=KD4DRA-9
      > > <http://aprs.fi/?c=raw&call=KD4DRA-9>
      > > >>>>>
      > > >>> <http://aprs.fi/?c=raw&call=KD4DRA-9
      > > <http://aprs.fi/?c=raw&call=KD4DRA-9>>) appear
      > > >>>
      > > >>>>> that you had it working on 05-22 16:3x, but it had reverted to
      > > Text by
      > > >>>>> 05-22 20:12 through 20:14. The packets from 05-23 02:4x don't
      > > count as
      > > >>>>> they went direct to APRS-IS.
      > > >>>>>
      > > >>>>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and
      > > >>>>> Win32
      > > >>>>>
      > > >>>>>
      > > >>>>>
      > > >>>>> Rick wrote:
      > > >>>>>
      > > >>>>>
      > > >>>>>> Thanks all for your help !
      > > >>>>>> Rick
      > > >>>>>>
      > > >>>>>>
      > > >>>>>> --- In aprsisce@yahoogroups.com
      > > <mailto:aprsisce%40yahoogroups.com>
      > > >>>>>>
      > > >>> <mailto:aprsisce%40yahoogroups.com>, "Lynn W. Deffenbaugh"
      > > >>> <kj4erj@>
      > > >>> wrote:
      > > >>>
      > > >>>>>>
      > > >>>>>>> Rick,
      > > >>>>>>>
      > > >>>>>>> Fred is correct, you'll want to wipe out all of the OpenCmd
      > > >>>>>>> and
      > > >>>>>>>
      > > >>> CloseCmd
      > > >>>
      > > >>>>>>> and have the single pair of:
      > > >>>>>>>
      > > >>>>>>> <OpenCmd>~!!0</OpenCmd>
      > > >>>>>>> <CloseCmd~!!0</CloseCmd>
      > > >>>>>>>
      > > >>>>>>> And according to what I see in the log below, you
      > do not have
      > > >>>>>>> the
      > > >>>>>>>
      > > >>> TT4 in
      > > >>>
      > > >>>>>>> KISS mode already. You'll need to do that first as
      > APRSISCE/32
      > > >>>>>>>
      > > >>> expects
      > > >>>
      > > >>>>>>> the device to already be KISS, although that's what
      > the Open
      > > >>>>>>> and
      > > >>>>>>>
      > > >>> Close
      > > >>>
      > > >>>>>>> Cmd tags are going to become. Because the TT4 isn't speaking
      > > >>>>>>>
      > > >>> KISS, the
      > > >>>
      > > >>>>>>> quiet time expires so it closes and re-opens the port.
      > > >>>>>>>
      > > >>>>>>> <RFtoISEnabled>0</RFtoISEnabled>
      > > >>>>>>>
      > > >>>>>>> RFtoIS controls the gating of RF-received APRS
      > packets to the
      > > >>>>>>>
      > > >>> APRS-IS connection. If it is set to 1 (the upcoming
      > default, but
      > > >>> not in the development version), all packets will be
      > forwarded on.
      > > >>>
      > > >>>>>>> <IStoRFEnabled>0</IStoRFEnabled>
      > > >>>>>>>
      > > >>>>>>> IStoRF controls the gating of messages from the
      > APRS-IS to the
      > > >>>>>>> RF
      > > >>>>>>>
      > > >>> interface if the target station has been heard
      > "recently" "local",
      > > >>> currently defined as max 2 hops in the past 30 minutes.
      > "Hops" are
      > > >>> counted as path components marked "used" in the path.
      > > >>>
      > > >>>>>>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows
      > Mobile and
      > > Win32
      > > >>>>>>>
      > > >>>>>>>
      > > >>>>>>> Rick wrote:
      > > >>>>>>>
      > > >>>>>>>
      > > >>>>>>>
      > > >>>>>>>> Hi Lynn
      > > >>>>>>>> I'm trying to setup running in kiss mode with the TT4 I
      > > >>>>>>>> noticed at the top of screen where it shows the status of
      > > >>>>>>>> your modes, it keeps cycleing, (open kiss rf, kiss
      > rf ok, and
      > > >>>>>>>> then close kiss rf.) Please help, have I got something set
      > > >>>>>>>>
      > > >>> wrong?
      > > >>>
      > > >>>>>>>> And also does telementry have to be enabled for postion
      > > reporting.
      > > >>>>>>>> See my captures below:
      > > >>>>>>>>
      > > >>>>>>>> Thanks Rick / kd4dra
      > > >>>>>>>>
      > > >>>>>>>>
      > > >>>>>>>> <!--RFPort[1]-->
      > > >>>>>>>> <RFPort Name="Kiss RF">
      > > >>>>>>>> <Protocol>KISS</Protocol>
      > > >>>>>>>> <Device>COM3:19200,N,8,1</Device> <RfBaud>1200</RfBaud>
      > > >>>>>>>> <OpenCmd>^M~</OpenCmd> <OpenCmd>XFLOW OFF</OpenCmd>
      > > >>>>>>>> <OpenCmd>FULLDUP ON</OpenCmd> <OpenCmd>KISS ON</OpenCmd>
      > > >>>>>>>> <OpenCmd>RESTART!!0</OpenCmd>
      > > >>>>>>>> <CloseCmd>^192^255^192~!!0</CloseCmd>
      > > >>>>>>>> <CloseCmd>^C^C^C~!!0</CloseCmd> <CloseCmd>TC 1!TS
      > > >>>>>>>> 1</CloseCmd> <CloseCmd>TN 2,0!TN 2,0</CloseCmd>
      > > >>>>>>>> <QuietTime>8</QuietTime> <Enabled>1</Enabled>
      > > >>>>>>>> <XmitEnabled>1</XmitEnabled>
      > <RFtoISEnabled>0</RFtoISEnabled>
      > > >>>>>>>> <IStoRFEnabled>0</IStoRFEnabled>
      > > >>>>>>>> <MyCallNot3rd>0</MyCallNot3rd>
      > > >>>>>>>> <BeaconingEnabled>1</BeaconingEnabled>
      > > >>>>>>>> <BeaconPath>wide1-1,wide2-1</BeaconPath>
      > > >>>>>>>> <TelemetryEnabled>0</TelemetryEnabled>
      > > >>>>>>>> <TelemetryPath>wide1-1,wide2-1</TelemetryPath>
      > > >>>>>>>> <!--DigiXform-->
      > > >>>>>>>> </RFPort>
      > > >>>>>>>>
      > > >>>>>>>> Here is my captured text...
      > > >>>>>>>> WinMain:2010-05-22T13:10:24 Starting Kiss RF Kiss
      > > >>>>>>>> RF:2010-05-22T13:10:24 Opening COM3 with 4 Args Kiss
      > > >>>>>>>> RF:2010-05-22T13:10:26 Missed Expected Response(cmd:) From
      > > >>>>>>>>
      > > >>> Command(^M~)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:10:27 Missed Expected Response(cmd:)
      > > >>>>>>>> From
      > > >>>>>>>>
      > > >>> Command(XFLOW OFF)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:10:28 Missed Expected Response(cmd:)
      > > >>>>>>>> From
      > > >>>>>>>>
      > > >>> Command(FULLDUP ON)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:10:30 Missed Expected Response(cmd:)
      > > >>>>>>>> From
      > > >>>>>>>>
      > > >>> Command(KISS ON)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:10:30 Have 63 Bytes to write Kiss
      > > >>>>>>>> RF:2010-05-22T13:10:30 Writing 63 Bytes from 0/63
      > > >>>>>>>> WinMain:2010-05-22T13:10:53 Logging Enabled
      > > >>>>>>>> WinMain:2010-05-22T13:10:54 Queueing
      > > >>>>>>>>
      > > >>>
      > >
      > KD4DRA-9>APWW02,WIDE1-1,WIDE2-1:<IGATE,MSG_CNT=0,LOC_CNT=4,DIR_CNT=0,R
      > > KD4DRA-9>F_CNT=4
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:10:54 KISS:Got 18 Bytes
      > ending in 0x84
      > > >>>>>>>> Kiss RF:2010-05-22T13:10:54
      > > >>>>>>>>
      > > >>> KISS:KD4YDC>APU25N,AB4KN-2*,KE4CJA-4*,WIDE2:;New
      > > >>> 444.6*261913z3328.45N/08426.24WmNew site for 444.600 (77hz) (41)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:10:54
      > > >>>>>>>>
      > > >>> KISS:Payload(<IGATE,MSG_CNT=0,LOC_CNT=4,DIR_CNT=0,RF_CNT=4
      > > >>>
      > > >>>>>>>> )
      > > >>>>>>>> Kiss RF:2010-05-22T13:10:54 KISS:Sending[79]:<C0
      > 00 82 A0 AE
      > > >>>>>>>>
      > > >>> AE>`d<E0 96 88>h<88 A4 82>r<AE 92 88 8A>b@b<AE 92 88 8A>d@c<03
      > > >>> F0><IGATE,MSG_CNT=0,LOC_CNT=4,DIR_CNT=0,RF_CNT=4<0A C0>
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:10:54 Have 79 Bytes to write Kiss
      > > >>>>>>>> RF:2010-05-22T13:10:54 Writing 79 Bytes from 0/79 Kiss
      > > >>>>>>>> RF:2010-05-22T13:10:54 Sent[79]:<C0 00 82 A0 AE AE>`d<E0 96
      > > >>>>>>>>
      > > >>> 88>h<88 A4 82>r<AE 92 88 8A>b@b<AE 92 88 8A>d@c<03
      > > >>> F0><IGATE,MSG_CNT=0,LOC_CNT=4,DIR_CNT=0,RF_CNT=4<0A C0>
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:10:57
      > > >>>>>>>>
      > > >>>
      > >
      > KISS:KD4DRA-9>APWW02,N4VDE-3*,WIDE2-1:<IGATE,MSG_CNT=0,LOC_CNT=4,DIR_C
      > > NT=0,RF_CNT=4
      > >
      > > >>> (52)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:03 KISS:Got 80 Bytes
      > ending in 0x43
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:03 Residual[80]:<C0 00 82 A0 AE
      > > >>>>>>>>
      > > >>> AE>`d<E0 96 88>h<88 A4 82>r<96 8A>h<86 94 82 E8 AE 92
      > 88 8A>b@`<AE
      > > >>> AE>92
      > > >>> 88 8A>d@c<03 F0><IGATE,MSG_CNT=0,LOC_CNT=4,DIR_CNT=0,RF_C
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:03
      > > >>>>>>>>
      > > >>>
      > >
      > KISS:KD4DRA-9>APWW02,KE4CJA-4*,WIDE1,WIDE2-1:<IGATE,MSG_CNT=0,LOC_CNT=
      > > 4,DIR_CNT=0,RF_CNT=4
      > >
      > > >>> (52)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:05
      > > >>>>>>>>
      > > >>>
      > KISS:N3MCZ-2>S5SU6U,KE4CJA-4*,N4VDE-3*,WIDE2:`n==lKT</`";A}_ (32)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:13 Terminating after 8112 msec vs
      > > >>>>>>>> 8000
      > > >>>>>>>>
      > > >>> Quiet
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:13 Closing COM3:19200,N,8,1 Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:13 Command[13]:^192^255^192~ Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:13 Output[3]:<C0 FF C0> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:13 Command[7]:^C^C^C~ Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:13 Output[3]:<03 03 03> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:13 Command[4]:TC 1 Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:13 Output[5]:TC 1<0D> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:15 Missed Expected Response(TS 1) From
      > > >>>>>>>>
      > > >>> Command(TC 1!TS 1)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:15 Command[6]:TN 2,0 Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:15 Output[7]:TN 2,0<0D> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:16 Missed Expected Response(TN 2,0)
      > > >>>>>>>>
      > > >>> From Command(TN 2,0!TN 2,0)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:16 Restarting Reader...
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:16 Reader Running on
      > > >>>>>>>> COM3:19200,N,8,1
      > > >>>>>>>>
      > > >>> (5 OpenCmds, 4 CloseCmds)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:16 Opening COM3:19200,N,8,1 Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:16 Opening COM3 with 4 Args Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:17 COM3:Packet Length 64
      > Version 2 Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:17 COM3:ServiceMask 0x1 Reserved1 0x0
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:17 COM3:MaxQueue Tx 0 Rx 0 Baud
      > > 268435456
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:17 COM3:Provider SubType 1
      > > >>>>>>>> Capabilities
      > > >>>>>>>>
      > > >>> 0xFF
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:17 COM3:Settable Params 127 Baud
      > > >>>>>>>>
      > > >>> 0x1007FFFF Data 0xF StopParity 0x1F07
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:17 COM3:Current Queue Tx
      > 0 Rx 4096
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:17 COM3:Provider
      > Specifics 0x0 0x0
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:17 CpOpen:Port COM3 19200,N,8,1
      > > >>>>>>>>
      > > >>> !CTSFlow !DSRFlow !OutXon(2048) !InXoff(512) DTR_ENABLE
      > !DSRSense
      > > >>> RTS_ENABLE
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:17 Opened
      > COM3:19200,N,8,1, Flushing
      > > >>>>>>>> 0
      > > >>>>>>>>
      > > >>> in TransmitQueue, Sending 5 OpenCmds
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:17 Command[3]:^M~ Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:17 Output[1]:<0D> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:18 Missed Expected Response(cmd:) From
      > > >>>>>>>>
      > > >>> Command(^M~)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:18 Command[9]:XFLOW OFF Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:18 Output[10]:XFLOW OFF<0D> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:19 CmdResp[99]:<C0 00 82 A0 A4
      > > >>>>>>>>
      > > >>> A6>@@`<96 82>h<8E 9C B2>f<96 82>h<8E 9C B2 EE 96
      > 8A>h<86 94 82 E8
      > > >>> A6>AE
      > > >>> 92 88 8A>d@`<8E 82>b@@@c<03
      > > >>> F0>!!0000007E02A5096027E702AA03AA----008D0224096A0000<0D 0A C0>
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:19 Missed Expected Response(cmd:)
      > > >>>>>>>> From
      > > >>>>>>>>
      > > >>> Command(XFLOW OFF)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:19 Command[10]:FULLDUP ON Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:19 Output[11]:FULLDUP ON<0D> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:20 Missed Expected Response(cmd:) From
      > > >>>>>>>>
      > > >>> Command(FULLDUP ON)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:20 Command[7]:KISS ON Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:20 Output[8]:KISS ON<0D> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:22 Missed Expected Response(cmd:) From
      > > >>>>>>>>
      > > >>> Command(KISS ON)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:22 Command[7]:RESTART Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:22 Output[8]:RESTART<0D> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:25 Terminating after 8594 msec vs 8000
      > > >>>>>>>>
      > > >>> Quiet
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:25 Closing COM3:19200,N,8,1 Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:25 Command[13]:^192^255^192~ Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:25 Output[3]:<C0 FF C0> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:25 Command[7]:^C^C^C~ Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:25 Output[3]:<03 03 03> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:25 Command[4]:TC 1 Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:25 Output[5]:TC 1<0D> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:26 Missed Expected Response(TS 1) From
      > > >>>>>>>>
      > > >>> Command(TC 1!TS 1)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:26 Command[6]:TN 2,0 Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:26 Output[7]:TN 2,0<0D> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:27 Missed Expected Response(TN 2,0)
      > > >>>>>>>>
      > > >>> From Command(TN 2,0!TN 2,0)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:27 Restarting Reader...
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:27 Reader Running on
      > > >>>>>>>> COM3:19200,N,8,1
      > > >>>>>>>>
      > > >>> (5 OpenCmds, 4 CloseCmds)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:27 Opening COM3:19200,N,8,1 Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:27 Opening COM3 with 4 Args Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:28 COM3:Packet Length 64
      > Version 2 Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:28 COM3:ServiceMask 0x1 Reserved1 0x0
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:28 COM3:MaxQueue Tx 0 Rx 0 Baud
      > > 268435456
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:28 COM3:Provider SubType 1
      > > >>>>>>>> Capabilities
      > > >>>>>>>>
      > > >>> 0xFF
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:28 COM3:Settable Params 127 Baud
      > > >>>>>>>>
      > > >>> 0x1007FFFF Data 0xF StopParity 0x1F07
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:28 COM3:Current Queue Tx
      > 0 Rx 4096
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:28 COM3:Provider
      > Specifics 0x0 0x0
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:28 CpOpen:Port COM3 19200,N,8,1
      > > >>>>>>>>
      > > >>> !CTSFlow !DSRFlow !OutXon(2048) !InXoff(512) DTR_ENABLE
      > !DSRSense
      > > >>> RTS_ENABLE
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:28 Opened
      > COM3:19200,N,8,1, Flushing
      > > >>>>>>>> 0
      > > >>>>>>>>
      > > >>> in TransmitQueue, Sending 5 OpenCmds
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:28 Command[3]:^M~ Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:28 Output[1]:<0D> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:28 CmdResp[81]:<C0 00 82 A0
      > > >>>>>>>>
      > > >>> A8>fbb`<9C>l<86 9C 8E>@b<96>h<9E B4 A6>@<F4 AE 92 88 8A>b@<E0
      > > >>> A8>9C>h<AC
      > > >>> 88 8A>@<E6 AE 92 88 8A>d@a<03
      > > F0>/221311z2848.56N/08133.12Wu123/000<C0>
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:29 Missed Expected Response(cmd:)
      > > >>>>>>>> From
      > > >>>>>>>>
      > > >>> Command(^M~)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:29 Command[9]:XFLOW OFF Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:29 Output[10]:XFLOW OFF<0D> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:30 Missed Expected Response(cmd:) From
      > > >>>>>>>>
      > > >>> Command(XFLOW OFF)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:30 Command[10]:FULLDUP ON Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:30 Output[11]:FULLDUP ON<0D> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:32 Missed Expected Response(cmd:) From
      > > >>>>>>>>
      > > >>> Command(FULLDUP ON)
      > > >>>
      > > >>>>>>>> Kiss RF:2010-05-22T13:11:32 Command[7]:KISS ON Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:32 Output[8]:KISS ON<0D> Kiss
      > > >>>>>>>> RF:2010-05-22T13:11:32 CmdResp[57]:<C0 00 A6>j<A6
      > > >>>>>>>>
      > > >>> AA>l<AA>`<9C>f<9A 86 B4>@<E4 96 8A>h<86 94 82 E8 AE 92 88
      > > 8A>b@`<AE 92
      > > >>> 88 8A>d@e<03 F0>`n==l#T</`";?}_ <0D C0>
      > > >>>
      > > >>>>>>>>
      > > >>>
      > > >>>
      > > >>>
      > > >
      > > >
      > > >
      > > >
      > > > ------------------------------------
      > > >
      > > > Yahoo! Groups Links
      > > >
      > > >
      > > >
      > > >
      > > >
      > >
      > >
      > >
      > >
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >

    • Show all 33 messages in this topic