Loading ...
Sorry, an error occurred while loading the content.

15380Re: tnc ports

Expand Messages
  • mm1ptt
    Feb 3 6:58 AM
    • 0 Attachment
      Yes, a dual-ported KAM hooked to AGW configures as 2 AGW ports.
      Here is output on the AGWmonitor window:

      1:Fm MB7UAH To APU25N Via WIDE1-1,GBR1-1 <UI pid=F0 Len=46 >[14:19:15]
      =I2=NOMGb=# BPHG314146/Full iGATE 144.800Mhz

      2:Fm UA6JHQ-14 To APU25N Via WIDE1-1,WIDE2-2 <UI pid=F0 Len=25 >[14:21:25]
      >030452zIGATE 20m <=> 2m

      1:Fm MB7UAH To APU25N Via WIDE1-1,GBR1-1 <UI pid=F0 Len=98 >[14:21:47]
      }EGPF>APRS,TCPIP,MB7UAH*:@031350z5552.00N/00426.00W_220/011g...t039h69b10370 U.K._Glasgow Airport

      And this is the output from the AWGPE log in APRSIS32:

      AGWPE:2012-02-03T14:19:15.600 AGW:AX.25[0] MB7UAH>APU25N,WIDE1-1,GBR1-1:=I2=NOMGb=# BPHG314146/Full iGATE 144.800Mhz
      AGWPE:2012-02-03T14:21:25.847 AGW:DataKind(K) Non-AX.25 in 56/92 Bytes of AGW(‚ ªdjœàª‚l”¢|®’ˆŠb@b®’ˆŠd@eð>030452zIGATE 20m <=> 2m
      )
      AGWPE:2012-02-03T14:21:47.328 AGW:AX.25[0] MB7UAH>APU25N,WIDE1-1,GBR1-1:}EGPF>APRS,TCPIP,MB7UAH*:@031350z5552.00N/00426.00W_220/011g...t039h69b10370 U.K._Glasgow Airport

      APRSIS32 seems to be dropping the data from all the ports that are not Port1 as non AX.25 packets.

      Chris.

      --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:
      >
      > If you open up Enables / View Logs / <YourAGWPortName> and enable it,
      > what does it say when you receive data on the other AGW ports? vs what
      > does it say in AGW's Monitor window?
      >
      > I'm assuming that a dual-ported KAM hooked to AGW configures as 2 AGW ports?
      >
      > Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      >
      > On 2/1/2012 8:09 AM, mm1ptt wrote:
      > > I am using the general release.
      > > When I configure APRSIS32 to connect directly to the KAM TNC via KISS it receives on both ports, and transmits on port 1.
      > > But when I use APRSIS32 to connect to the KAM TNC through AGWPE aprsis32 still transmits on port 1 but its only receives on port 1.
      > > Chris
      > >
      > > --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)"<kj4erj@> wrote:
      > >> Yes, APRSISCE/32 should receive anything that comes in from AGWPE, but
      > >> will only transmit on the first configured port.
      > >>
      > >> Are you running the general release or the latest development
      > >> (http://aprsisce.wikidot.com/doc:development-version)? About should say
      > >> development somewhere if the latter.
      > >>
      > >> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      > >>
      > >> On 2/1/2012 6:50 AM, mm1ptt wrote:
      > >>> Is it possible to do the same with AGWPE; TX on port 1 and receive all other ports just now?
      > >>>
      > >>> I use AGWPE to control my KAM, Tiny2, and soundcard all at the same time.
      > >>> At the moment it seems APRSIS32 can only receive on Port1 (Local VHF Port on KAM - SSID MM1PTT).
      > >>> I have UI-View32 (MM1PTT-14) running on the same machine and by using the port mask function it receives on Port2 and Port4 of AGWPE. (Port2 = HF port on KAM and Port4 = soundcard for 300bd HF receive).
      > >>> Port3 is used by UISS (MM1PTT-6) which is the Tiny2 that monitors the ISS downlink.
      > >>>
      > >>> I'm looking forward for port masking support for APRSIS32, then I can run multiple copies of the same program for different SSID's.
      > >>>
      > >>> Chris.
      > >>>
      > >>> --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)"<kj4erj@> wrote:
      > >>>> Not yet. APRSISCE/32 will currently only TX on the first port. It
      > >>>> should receive from both ports, though.
      > >>>>
      > >>>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      > >>>>
      > >>>> On 1/27/2012 1:41 PM, Pedro Cruz wrote:
      > >>>>> Hello
      > >>>>> Mr Lynn
      > >>>>> In APRS32 it´s possible to configure a dual port tnc for TX on port 1
      > >>>>> and port 2?
      > >>>>> Best 73!
      > >>>>> Pedro Cruz - CU2JX
      > >>>
      > >>>
      > >>> ------------------------------------
      > >>>
      > >>> Yahoo! Groups Links
      > >>>
      > >>>
      > >>>
      > >>>
      > >
      > >
      > >
      > > ------------------------------------
      > >
      > > Yahoo! Groups Links
      > >
      > >
      > >
      > >
      >
    • Show all 6 messages in this topic