Loading ...
Sorry, an error occurred while loading the content.

15320Re: [aprsisce] Re: tnc ports

Expand Messages
  • Lynn W Deffenbaugh (Mr)
    Feb 1, 2012
    • 0 Attachment
      If you open up Enables / View Logs / <YourAGWPortName> and enable it,
      what does it say when you receive data on the other AGW ports? vs what
      does it say in AGW's Monitor window?

      I'm assuming that a dual-ported KAM hooked to AGW configures as 2 AGW ports?

      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

      On 2/1/2012 8:09 AM, mm1ptt wrote:
      > I am using the general release.
      > When I configure APRSIS32 to connect directly to the KAM TNC via KISS it receives on both ports, and transmits on port 1.
      > But when I use APRSIS32 to connect to the KAM TNC through AGWPE aprsis32 still transmits on port 1 but its only receives on port 1.
      > Chris
      >
      > --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)"<kj4erj@...> wrote:
      >> Yes, APRSISCE/32 should receive anything that comes in from AGWPE, but
      >> will only transmit on the first configured port.
      >>
      >> Are you running the general release or the latest development
      >> (http://aprsisce.wikidot.com/doc:development-version)? About should say
      >> development somewhere if the latter.
      >>
      >> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      >>
      >> On 2/1/2012 6:50 AM, mm1ptt wrote:
      >>> Is it possible to do the same with AGWPE; TX on port 1 and receive all other ports just now?
      >>>
      >>> I use AGWPE to control my KAM, Tiny2, and soundcard all at the same time.
      >>> At the moment it seems APRSIS32 can only receive on Port1 (Local VHF Port on KAM - SSID MM1PTT).
      >>> I have UI-View32 (MM1PTT-14) running on the same machine and by using the port mask function it receives on Port2 and Port4 of AGWPE. (Port2 = HF port on KAM and Port4 = soundcard for 300bd HF receive).
      >>> Port3 is used by UISS (MM1PTT-6) which is the Tiny2 that monitors the ISS downlink.
      >>>
      >>> I'm looking forward for port masking support for APRSIS32, then I can run multiple copies of the same program for different SSID's.
      >>>
      >>> Chris.
      >>>
      >>> --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)"<kj4erj@> wrote:
      >>>> Not yet. APRSISCE/32 will currently only TX on the first port. It
      >>>> should receive from both ports, though.
      >>>>
      >>>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      >>>>
      >>>> On 1/27/2012 1:41 PM, Pedro Cruz wrote:
      >>>>> Hello
      >>>>> Mr Lynn
      >>>>> In APRS32 it´s possible to configure a dual port tnc for TX on port 1
      >>>>> and port 2?
      >>>>> Best 73!
      >>>>> Pedro Cruz - CU2JX
      >>>
      >>>
      >>> ------------------------------------
      >>>
      >>> Yahoo! Groups Links
      >>>
      >>>
      >>>
      >>>
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
    • Show all 6 messages in this topic