Loading ...
Sorry, an error occurred while loading the content.

15312Re: [aprsisce] Re: tnc ports

Expand Messages
  • Lynn W Deffenbaugh (Mr)
    Feb 1, 2012
      Yes, APRSISCE/32 should receive anything that comes in from AGWPE, but
      will only transmit on the first configured port.

      Are you running the general release or the latest development
      (http://aprsisce.wikidot.com/doc:development-version)? About should say
      development somewhere if the latter.

      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

      On 2/1/2012 6:50 AM, mm1ptt wrote:
      > Is it possible to do the same with AGWPE; TX on port 1 and receive all other ports just now?
      > I use AGWPE to control my KAM, Tiny2, and soundcard all at the same time.
      > At the moment it seems APRSIS32 can only receive on Port1 (Local VHF Port on KAM - SSID MM1PTT).
      > I have UI-View32 (MM1PTT-14) running on the same machine and by using the port mask function it receives on Port2 and Port4 of AGWPE. (Port2 = HF port on KAM and Port4 = soundcard for 300bd HF receive).
      > Port3 is used by UISS (MM1PTT-6) which is the Tiny2 that monitors the ISS downlink.
      > I'm looking forward for port masking support for APRSIS32, then I can run multiple copies of the same program for different SSID's.
      > Chris.
      > --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)"<kj4erj@...> wrote:
      >> Not yet. APRSISCE/32 will currently only TX on the first port. It
      >> should receive from both ports, though.
      >> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      >> On 1/27/2012 1:41 PM, Pedro Cruz wrote:
      >>> Hello
      >>> Mr Lynn
      >>> In APRS32 it´s possible to configure a dual port tnc for TX on port 1
      >>> and port 2?
      >>> Best 73!
      >>> Pedro Cruz - CU2JX
      > ------------------------------------
      > Yahoo! Groups Links
    • Show all 6 messages in this topic