Loading ...
Sorry, an error occurred while loading the content.

1292Re: [aprsisce] Re: Kenwood Development Release

Expand Messages
  • Stan Leeds
    May 1 6:39 PM
    • 0 Attachment
      Lynn,

      Mine failed to finish downloading.

      Error stated "Coral CDN (Cache) Fetch Failed, Retry Direct?", pressing YES, it resumed and finished downloading and updated correctly.

      FYI and 73,
      Stan/KC7EHJ


      On 5/1/2010 8:57 PM, Robin Williams wrote:
       

      Mine failed too.
      Robin ZL3REW

      -----Original Message-----
      From: aprsisce@yahoogroup s.com [mailto:aprsisce@yahoogroup s.com] On Behalf
      Of jandgandjochem
      Sent: Sunday, 2 May 2010 12:06 p.m.
      To: aprsisce@yahoogroup s.com
      Subject: [aprsisce] Re: Kenwood Development Release

      Tried it and clicking about reveals a new development version is available
      but the download fails every time.

      I have no idea why.

      Gerard
      VK2JNG

      --- In aprsisce@yahoogroup s.com, "Lynn W. Deffenbaugh" <kj4erj@...> wrote:
      >
      > Edit your XML file
      > (http://aprsisce. wikidot.com/ editing-xml- configuration) and set
      > <Update.Development > to 1. After starting the client back up, the
      > About box will check for the development version instead of the
      > general release. Note that you probably want to keep a copy of your
      > original XML and EXE in case you want to go back. The development
      > version upgrades the XML such that your ports will be gone if you go
      > back. And after running the development version, you have to shut it
      > down to set a few other <Port>-based parameters to enable transmitting and
      Igating.
      >
      > Lynn (D) - KJ4ERJ
      >
      > PS. The <Port>-based parameters you'll want to check are:
      >
      > <Enabled>1</ Enabled>
      > <XmitEnabled> 1</XmitEnabled>
      > <RFtoISEnabled> 1</RFtoISEnabled >
      > <IStoRFEnabled> 0</IStoRFEnabled >
      >
      >
      > jandgandjochem wrote:
      > > Where can I download the development release for the Kenwood TM-D710.
      > >
      > > Love to try it but can't find it in the files section and the "about"
      button gives "Verified"
      > >
      > >
      > > Thanks,
      > >
      > > Gerard
      > > VK2JNG
      > >
      > > --- In aprsisce@yahoogroup s.com, "Lynn W. Deffenbaugh" <kj4erj@> wrote:
      > >
      > >> To any of you that have a Kenwood D710,
      > >>
      > >> I just posted a development release that includes support for the
      > >> Kenwood D710 in both Packet (Kenwood) and KISS mode. I've
      > >> hard-coded (for now) the initialization strings and
      > >> de-initialization strings that drive the TNC as required to do the
      > >> work. The Kenwood mode theoretically enables GPS data to come in
      alongside the TNC data and it
      > >> will get parsed. I don't DO anything with it, but I theoretically
      > >> detect it and parse it.
      > >>
      > >> If anyone has a GPS connected to their D710 and is using it in
      > >> UI-View, I'd appreciate it if you can give this version a try and
      > >> capture the output of the [PortName] (see below) Trace Log and
      > >> e-mail it to KJ4ERJ@
      > >>
      > >> To download this development version, you must set
      > >> <Update.Development > to 1 in your XML file, then hit About.
      > >>
      > >> To create a new RF port, select Configure / Ports / New Port.
      > >> Select the Type (Kenwood for the NMEA/D710 TNC data) and give the
      > >> port a name (that's the [PortName] above). Tell it No about a
      > >> TCP/IP port and configure your COM port appropriately. Then you
      > >> need to Enables / RF Ports / [PortName] to get it communicating.
      > >> But BEFORE you do that, toggle Enables / Logging / General + File
      > >> so that the newly created [PortName] Trace Log automatically opens
      > >> and captures all of the startup stuff.
      > >>
      > >> You should see lots of command flying that set up the TNC (borrowed
      > >> from the TM-D710_KWD_ UIV.CMD file) and then text for any packets
      received.
      > >> If you've got a GPS connected, you will (hopefully) see NMEA
      > >> sentences going by as well. That's what I'm after, so if you can
      > >> hit the Copy menu option on the Trace Log window and paste it into
      > >> an e-mail, that'd be wonderful!
      > >>
      > >> If you have any questions, APRS message KJ4ERJ-12 as I have jury
      > >> duty starting tomorrow and don't know what Internet/E-mail access
      > >> I'll have but they said I can bring my cell phone.
      > >>
      > >> I'll be watching for the early adopters to be upgrading to this
      > >> version! It's getting closer and closer to release. Now I need to
      > >> put in configuration options for all of the new port enables,
      > >> port-specific paths, and Open/Close command strings. You can see
      > >> these in the XML file between the <Port Name=xxxx> and </Port>
      > >> elements. Yes, I'm now nesting configuration parameters.
      > >>
      > >> Lynn (D) - KJ4ERJ
      > >>
      > >>
      >

      ------------ --------- --------- ------

      Yahoo! Groups Links


    • Show all 12 messages in this topic