Loading ...
Sorry, an error occurred while loading the content.

Re: ASP error: Can't locate object method "get" via package "APR::Table"...

Expand Messages
  • Helmut Zeilinger
    Hi Maurice, can you check of few things: Is there an APR::Table module? (Usually in a subtree of /usr/lib/perl5 ) This should have been created/installed
    Message 1 of 5 , Jun 11, 2006
    • 0 Attachment
      Hi Maurice,

      can you check of few things:

      Is there an APR::Table module?
      (Usually in a subtree of "/usr/lib/perl5")

      This should have been created/installed within the mod_perl 2 installation
      (from the source package).

      If yes what version is it ?
      Are there multiple (outdated) versions of it installed?

      If no, how did you install mod_perl? Can you reinstall it from the
      mod_perl's source:

      http://perl.apache.org/dist/mod_perl-2.0-current.tar.gz


      Helmut


      Maurice Yarrow schrieb:
      > Hello ASP people
      >
      > Environment:
      > FC1
      > apache httpd 2.0.58
      > perl5.8.8
      > BLDBM, BLDBM::Sync, Apache::ASP (2.59) - I just installed these.
      > mod_perl.so (2.0.2) installed, httpd.conf configured with appropriate
      > LoadModule directive
      >
      > After making and installing the above perl modules, copied the
      > Apache-ASP-2.59/site/asp directory tree to htdocs (including,
      > of course, htdocs/asp/eg/.htaccess), added the appropriate
      > <Directory "/usr/local/apache2/htdocs/asp/eg" >
      > Options FollowSymLinks
      > AllowOverride All
      > </Directory>
      > directive.
      > Can go to http://localhost/asp (index.html), but get the below error
      > message when going to http://localhost/asp/eg (i.e., the examples
      > dir from above):
      >
      > [Tue Jun 06 00:05:32 2006] [error] [client 192.168.1.122] Can't locate
      > object method "get" via package "APR::Table" at
      > /usr/local/lib/perl5/site_perl/5.8.8/Apache/ASP.pm line 2016.\n at
      > /usr/local/lib/perl5/site_perl/5.8.8/Apache/ASP.pm line
      > 2016\n\tApache::ASP::get_dir_config('APR::Table=HASH(0x85005c4)',
      > 'Global') called at /usr/local/lib/perl5/site_perl/5.8.8/Apache/ASP.pm
      > line 275\n\tApache::ASP::new('Apache::ASP',
      > 'Apache2::RequestRec=SCALAR(0x85005a0)',
      > '/usr/local/apache2/htdocs/asp/eg/index.html') called at
      > /usr/local/lib/perl5/site_perl/5.8.8/Apache/ASP.pm line
      > 183\n\tApache::ASP::handler('Apache2::RequestRec=SCALAR(0x85005a0)')
      > called at -e line 0\n\teval {...} called at -e line 0\n
      > [root@orion Apache-ASP-2.59]#
      >
      > I observe that this is an error that has been reported previously in
      > the ASP user group archives (currently maintained at yahoo), but
      > I saw no indication of a resolution. (I am not a yahoo special
      > interest group member, so did not pursue it further at that location.)
      >
      > Any ideas ?
      >
      > Regards,
      > Maurice Yarrow
      >
      >
      >
      >
      > ---------------------------------------------------------------------
      > To unsubscribe, e-mail: asp-unsubscribe@...
      > For additional commands, e-mail: asp-help@...
      >


      ---------------------------------------------------------------------
      To unsubscribe, e-mail: asp-unsubscribe@...
      For additional commands, e-mail: asp-help@...
    • dpasqua2
      Hi Maurice, I had the same problem. It seems that Apache2::compat is required by Apache ASP to run with mod_perl 2. The the solution was to load
      Message 2 of 5 , Jun 12, 2006
      • 0 Attachment
        Hi Maurice,

        I had the same problem. It seems that Apache2::compat is required by
        Apache ASP to run with mod_perl 2. The the solution was to load
        Apache2::compat in startup.pl.

        The file startup.pl must be included in Apache's configuration file.

        startup.pl:

        #!/usr/bin/perl

        use Apache2::compat;
        1;

        httpd.conf:

        PerlRequire /usr/local/apache/conf/startup.pl

        Regards,
        Douglas Pasqua
        Brazil

        --- In apache-asp@yahoogroups.com, Maurice Yarrow <yarrow@...> wrote:
        >
        > Hello ASP people
        >
        > Environment:
        > FC1
        > apache httpd 2.0.58
        > perl5.8.8
        > BLDBM, BLDBM::Sync, Apache::ASP (2.59) - I just installed these.
        > mod_perl.so (2.0.2) installed, httpd.conf configured with
        appropriate
        > LoadModule directive
        >
        > After making and installing the above perl modules, copied the
        > Apache-ASP-2.59/site/asp directory tree to htdocs (including,
        > of course, htdocs/asp/eg/.htaccess), added the appropriate
        > <Directory "/usr/local/apache2/htdocs/asp/eg" >
        > Options FollowSymLinks
        > AllowOverride All
        > </Directory>
        > directive.
        > Can go to http://localhost/asp (index.html), but get the below error
        > message when going to http://localhost/asp/eg (i.e., the examples
        > dir from above):
        >
        > [Tue Jun 06 00:05:32 2006] [error] [client 192.168.1.122] Can't locate
        > object method "get" via package "APR::Table" at
        > /usr/local/lib/perl5/site_perl/5.8.8/Apache/ASP.pm line 2016.\n at
        > /usr/local/lib/perl5/site_perl/5.8.8/Apache/ASP.pm line
        > 2016\n\tApache::ASP::get_dir_config('APR::Table=HASH(0x85005c4)',
        > 'Global') called at /usr/local/lib/perl5/site_perl/5.8.8/Apache/ASP.pm
        > line 275\n\tApache::ASP::new('Apache::ASP',
        > 'Apache2::RequestRec=SCALAR(0x85005a0)',
        > '/usr/local/apache2/htdocs/asp/eg/index.html') called at
        > /usr/local/lib/perl5/site_perl/5.8.8/Apache/ASP.pm line
        > 183\n\tApache::ASP::handler('Apache2::RequestRec=SCALAR(0x85005a0)')
        > called at -e line 0\n\teval {...} called at -e line 0\n
        > [root@orion Apache-ASP-2.59]#
        >
        > I observe that this is an error that has been reported previously in
        > the ASP user group archives (currently maintained at yahoo), but
        > I saw no indication of a resolution. (I am not a yahoo special
        > interest group member, so did not pursue it further at that location.)
        >
        > Any ideas ?
        >
        > Regards,
        > Maurice Yarrow
        >
        >
        >
        >
        > ---------------------------------------------------------------------
        > To unsubscribe, e-mail: asp-unsubscribe@...
        > For additional commands, e-mail: asp-help@...
        >






        ---------------------------------------------------------------------
        To unsubscribe, e-mail: asp-unsubscribe@...
        For additional commands, e-mail: asp-help@...
      • Randy Kobes
        ... [ ... ] Usually these errors are a result of not use()ing the module in question; from perl -MModPerl::MethodLookup -e print_method get the relevant module
        Message 3 of 5 , Jun 12, 2006
        • 0 Attachment
          On Tue, 6 Jun 2006, Maurice Yarrow wrote:

          > Hello ASP people
          >
          > Environment:
          > FC1
          > apache httpd 2.0.58
          > perl5.8.8
          > BLDBM, BLDBM::Sync, Apache::ASP (2.59) - I just installed these.
          > mod_perl.so (2.0.2) installed, httpd.conf configured with appropriate
          > LoadModule directive
          >
          > After making and installing the above perl modules, copied the
          > Apache-ASP-2.59/site/asp directory tree to htdocs (including,
          > of course, htdocs/asp/eg/.htaccess), added the appropriate
          > <Directory "/usr/local/apache2/htdocs/asp/eg" >
          > Options FollowSymLinks
          > AllowOverride All
          > </Directory>
          > directive.
          > Can go to http://localhost/asp (index.html), but get the below error
          > message when going to http://localhost/asp/eg (i.e., the examples
          > dir from above):
          >
          > [Tue Jun 06 00:05:32 2006] [error] [client 192.168.1.122] Can't locate object
          > method "get" via package "APR::Table" at
          > /usr/local/lib/perl5/site_perl/5.8.8/Apache/ASP.pm line 2016.\n at
          [ ... ]

          Usually these errors are a result of not use()ing the
          module in question; from
          perl -MModPerl::MethodLookup -e print_method get
          the relevant module is APR::Table. However, this
          module should have been loaded (in Apache::ASP 2.59)
          by Apache::ASP::ApacheCommon. Did all of the mod_perl
          and Apache::ASP tests succeed when you installed them?
          If so, does adding
          use APR::Table ();
          at the beginning of Apache::ASP help?

          --
          best regards,
          Randy Kobes

          ---------------------------------------------------------------------
          To unsubscribe, e-mail: asp-unsubscribe@...
          For additional commands, e-mail: asp-help@...
        • Maurice Yarrow
          Randy, et. al.: I sent this reply out yesterday (see below) in response to Helmut s similar reply and request for for further info. As you see, there was a
          Message 4 of 5 , Jun 12, 2006
          • 0 Attachment
            Randy, et. al.:

            I sent this reply out yesterday (see below) in response to Helmut's
            similar reply and request for for further info.

            As you see, there was a patch tendered a year ago, but not yet
            incorporated into any release. The patch certainly worked for me,
            as it had it's author, but whether this is a righteous patch or not is
            not for me to determine, but rather the ASP community.

            However, thanks for you reply and concern.

            Maurice Yarrow


            Helmut

            Thankyou for responding.
            Actually, I found a patch that solved the problem: And , in fact, this
            turned out to be a patch to ASP.pm, not APR::Table.pm. It was
            turned in in a formal patch designation on 2005-06-22
            See:
            http://www.mail-archive.com/asp@.../msg02428.html

            The lines 65-71:
            if($ENV{MOD_PERL}) {
            $ModPerl2 = ($mod_perl::VERSION >= 1.99);
            if($ModPerl2) {
            eval "use Apache::ASP::ApacheCommon ();";
            die($@) if $@;
            }
            }

            become
            if($ENV{MOD_PERL}) {
            $ModPerl2 = ($mod_perl::VERSION >= 1.99);
            my $ver = $mod_perl::VERSION;
            if ($ver eq "") { $ver = $ENV{MOD_PERL_API_VERSION}; }
            $ModPerl2 = ($ver >= 1.99);
            if($ModPerl2) {
            eval "use Apache::ASP::ApacheCommon ();";
            die($@) if $@;
            }
            }

            Note that you can find this correspondence by using
            Yahoo's search engine: just search for the exact Apache
            error message:
            Can't locate object method "get" via package "APR::Table"

            Once again, thanks for responding.

            Maurice Yarrow



            Helmut Zeilinger wrote:

            Hi Maurice,

            can you check of few things:

            Is there an APR::Table module?
            (Usually in a subtree of "/usr/lib/perl5")

            This should have been created/installed within the mod_perl 2 installation
            (from the source package).

            If yes what version is it ?
            Are there multiple (outdated) versions of it installed?

            If no, how did you install mod_perl? Can you reinstall it from the
            mod_perl's source:

            http://perl.apache.org/dist/mod_perl-2.0-current.tar.gz


            Helmut


            Randy Kobes wrote:

            > On Tue, 6 Jun 2006, Maurice Yarrow wrote:
            >
            >> Hello ASP people
            >>
            >> Environment:
            >> FC1
            >> apache httpd 2.0.58
            >> perl5.8.8
            >> BLDBM, BLDBM::Sync, Apache::ASP (2.59) - I just installed these.
            >> mod_perl.so (2.0.2) installed, httpd.conf configured with appropriate
            >> LoadModule directive
            >>
            >> After making and installing the above perl modules, copied the
            >> Apache-ASP-2.59/site/asp directory tree to htdocs (including,
            >> of course, htdocs/asp/eg/.htaccess), added the appropriate
            >> <Directory "/usr/local/apache2/htdocs/asp/eg" >
            >> Options FollowSymLinks
            >> AllowOverride All
            >> </Directory>
            >> directive.
            >> Can go to http://localhost/asp (index.html), but get the below error
            >> message when going to http://localhost/asp/eg (i.e., the examples
            >> dir from above):
            >>
            >> [Tue Jun 06 00:05:32 2006] [error] [client 192.168.1.122] Can't
            >> locate object method "get" via package "APR::Table" at
            >> /usr/local/lib/perl5/site_perl/5.8.8/Apache/ASP.pm line 2016.\n at
            >
            > [ ... ]
            >
            > Usually these errors are a result of not use()ing the
            > module in question; from
            > perl -MModPerl::MethodLookup -e print_method get
            > the relevant module is APR::Table. However, this
            > module should have been loaded (in Apache::ASP 2.59)
            > by Apache::ASP::ApacheCommon. Did all of the mod_perl
            > and Apache::ASP tests succeed when you installed them?
            > If so, does adding
            > use APR::Table ();
            > at the beginning of Apache::ASP help?
            >



            ---------------------------------------------------------------------
            To unsubscribe, e-mail: asp-unsubscribe@...
            For additional commands, e-mail: asp-help@...
          Your message has been successfully submitted and would be delivered to recipients shortly.