Theory and practical of zero point energy thruster
- Theory of working of this thruster:
Within the Basic tube ions are generated and emmited from the Needle. These ions move toward the Insulated wire. On the Steel wall these ions are electrically discharged by an effect within the Corona discharger tube. The Steel wall gets charged up with opposite polarity due to corona effect, and attracts the ions. The ions are attracted by the Steel wall. After some latency time, the atoms of the Steel wall start to require discharging of ion. The ions will start releasing their charge after td (td = 2,62E-16s) to the Steel wall. During this time the atoms of the Steel wall will impact the charged ions. The Total Energy Density will be establish before duration time of ion neutralization, after latency time.
td = ions electron radius attracted by the Steel wall^2 / quantum of circulation = 2,62E-16s
dion = ions electron radius attracted by the Steel wall = 3,086E-10m
h/2me = quantum of circulation = 3,636E-4 [m^2/s]
Similar, but opposite effect is observable on the Needle, after the latency time, bellow the duration time td, the atoms of the Needle will start releasing electrical charge to the surrounding air.
Bellow time td (td = 2,62E-16s), the atoms of the Needle will charges air molecules. Zero Point Energy (ZPE) causes the Total Energy Density’s (TED’s) liquidation after latency time, before duration time of ion formation.
In the Corona discharger tube similar effect occurs. In the Corona discharger tube due to corona discharge a hissing sound may be heard, depending on the intensity of the discharge.
The electrical discharge of ions produces positive holes in the energy field, since the speed of zero point energy (vzpe) is 2E18 time faster than the speed of light (identical to the speed of tahons), vzpe = 2E18 * 3E8 m/s. Zero point energy establish required Total Energy Density before than goes down Electric Energy's Density by neutralized ion. This effect produce moving plus energy's parts in space, I call them positive holes.
The generation of ions will also produce holes in the Total Energy Density field, but with substantially less thrust than as when neutralization occurs, and negatives. Emergent holes are originates from protons within the nucleus of the atoms. Zero Point Energy causes the Total Energy Density situation, but due to the slower propagation speed of the Electric Field its energy lags behind the effect of the Zero Point Energy.
The positive and negative holes in the Zero Point Energy will result in thrust. Emergent holes are originates from protons within the nucleus of the atoms. By moving holes in the Basic tube within the Total Energy Density Field, the Zero Point Energy flows toward the Needle (Positive holes move toward the Needle). This flow of mass of energy is a result of the reaction to the thrust.
The direction of thrust in the Corona discharger tube is of none equal intensity, but of opposite direction, than in Basic tube,. The diameter of the holes are td * (vzpe-c)= 2,62E-16s * 2E18 * 3E8m/s. td is time required for the ions to neutralize, vzpe is speed of the Zero Point Energy. Big holes are superimposed to each other, and moves.
The total intensity of ion neutralizations (ini) can be calculated by measuring the intensity of the electrical current at Special electrode of Corona discharger tube.
Difference of Total Energy Density (EED) moves, as positive holes. EED is equal as electric field energy of ion:
EED = e^2 / (8 * pi * eps0 * dion) = 7,47E-19 VAs
If the system is properly tuned (by adjusting the geometry of the components of the system and by maintaining proper geometrical relationships between its components) the propagation of ZPE (as positive holes) is substantial and will result in strong thrust. The intensity of the thrust, under proper circumstances, can produce lifting forces sufficiently strong that the system can lift its own weight, if neutralizing ions on Steel wall smooth surface bellow duration time moves enough fast upward, with enough high ion neutralizations intensity. Speed of moving of positive holes downwards are 2E18 time faster than the upward movings speed of neutralizing ions, vph = 2E18 * vion, (vion is.speed of neutralizing ion). Zero Point Energy moves downwards with speed of vph (speed of Positive holes). Thrust can be derived from E=mc^2. Moving ZPE mass is mzpe = EED / c^2, with speed of Positive holes. Speed of moving ZPE mass (speed of mass of positive holes) is vph
= 2E18 * vion. Number of moving holes is nh = ini * td. Impulse of Thrust is K = nh * vph * mzpe. Thrust is F = nh * mzpe * vph / td.
F = full ion neutralizations intensity * moving ZPE mass * speed of positive holes,
F = ini * (EED / c^2) * vion * 2E18,
For example: I = 60mA, vion = 2,6 m/s: ini = full ion neutralizations intensity = I / e = 3,745E17 1/s, F = 16,16N
For substantially higher thrust on lower electric power, we have to drop air pressure in Basic tube. In this case, in Corona discharger tube we have to tune in optimale voltage between Needle and Special electrode. Two Needles could to be on the same potential. With voltage between Corona discharger's Needle and Special electrode we can control the thrust. Regulation of thrust isn’t linear from voltage between these two electrodes.
Simple: On the Steel wall ions neutralizes. As higher is intensity of ion-neutralization, thrust became higher. Neutralization of ions produce positive holes in full energy density in space by slow speed of electric energy density. Needle produce negative holes with substantially less speed. Positive holes have higher energy density as normal space, negative lower. Positive holes moves with 2E18 * vion speed toward opposite way as neutralizing ions, as moving energy. This moving of energy's mass make thrust.
For the continuous operation, the thruster has to be powered by AC voltage. The frequency is inversely proportional to the lenght of the Basic tube. The optimale waveform of the voltage is light cumulative tetragon waveform.