Loading ...
Sorry, an error occurred while loading the content.

Messages List

33240

Washing machine replacement on AMEL54

Dear Amelians,The washing machine on my AMEL54 needs to be replaced. The Bosch model used on my boat, doesn't exist anymore and I couldn't find a new machine
Alex Ramseyer
7:52 AM
#33240
 
33239

regarding the "mystery" part just posted on the photo album

Good morning flyboyscdswa Regarding the picture of the mystery part just posted: To me, it looks like the “Balancine” which hold the end of the boom
Alexandre Uster von Baar
6:08 AM
#33239
 
33238

Re: Pump out of black water

We use a similar hose and even without the snap connector it has worked in places like Turkey (where pump outs are recorded electronically by Blue Cards). On
rossirossix4
10:45 PM
#33238
 
33237

Re: AC abd Low pressure pump numbers

Hi Eric, I am very satisfied with the Marsh pump. Can send you all the details next Monday when I am back on the boat. Barry & Penny "Lady Penelope II" AMEL
Barry Connor
10:22 PM
#33237
 
33236

Re: AC abd Low pressure pump numbers [1 Attachment]

Thanks Ben ! From: amelyachtowners@yahoogroups.com [mailto:amelyachtowners@yahoogroups.com] Sent: Wednesday, May 24, 2017 7:27 PM To:
    sailormon
    6:27 PM
    #33236
    This message has attachments
    33235

    Re: AC abd Low pressure pump numbers

    Eric, I installed this pump last year for AC salt water. Ben Driver La Bella Vita SM #347 Sent from my iPhone 6S ... Eric, I installed this pump last year for
    Ben Driver
    4:59 PM
    #33235
     
    33234

    Re: Procedure to unfurl and fuel the mizzen on a SM

    I agree, the same applies when furling. Allowing the boom to rise when furling will lead to a jam up. Danny SM 299 Ocean Pearl
    Danny and Yvonne SIMMS
    4:06 PM
    #33234
     
    33233

    Re: Procedure to unfurl and fuel the mizzen on a SM

    Another suggestion... With in mast furlers it is common to have the upper part of the sail fail to unroll if the boom is allowed to rise too high when
    bill_9895
    3:57 PM
    #33233
     
    33232

    Re: AC abd Low pressure pump numbers

    Eric, I changed mine. This is the pump the folks at Costal Climate recommended. You can save yourself about $100 if you buy it on eBay.
    Mark Erdos
    3:29 PM
    #33232
     
    33231

    Re: GPS signal loss

    As always, THANKS you so much Bill!!! Sincerely, Alexandre ... On Wed, 5/24/17, 'Bill & Judy Rouse' yahoogroups@... [amelyachtowners]
    Alexandre Uster von Baar
    2:09 PM
    #33231
     
    33230

    AC abd Low pressure pump numbers

    I saw that some people changed their AC water pump to a March magnetic drive pumps. What model was used. Does anyone know the specifications for the lift pump
    sailormon
    2:02 PM
    #33230
     
    33229

    Re: GPS signal loss

    Alex, It probably has a TNC connector on the end of the wire. It might be BNC, but I doubt it. Google TNC and you will see that the connection can be removed
    Bill & Judy Rouse
    1:56 PM
    #33229
     
    33228

    Re: GPS signal loss

    Good afternoon Bill, Thanks so much! I know exactly which one it is!!! Actually mine is on the angled bar that connects the 2 mizzen back stay (also where I
    Alexandre Uster von Baar
    1:34 PM
    #33228
     
    33227

    Re: GPS signal loss

    Alex, You do not sound stupid! The Furuno GPA017 - GPS antennas look like a mushroom which is about 10cm round and 6cm high, The normal location is on the aft
    Bill & Judy Rouse
    12:59 PM
    #33227
     
    33226

    Re: GPS signal loss

    Good afternoon Bill I hate to sound stupid, but where is located the antenna? I also lost boat data on the radar display (no longer indicate speed, etc.) I
    Alexandre Uster von Baar
    12:47 PM
    #33226
     
    View First Topic Go to View Last Topic