MITSCNVT runs under CP/M and is used used to copy files from a MITS format floppy disk to a CP/M floppy disk.
I have updated the version found throughout the internet as follows:
1) Replaced deleted source lines that prevented assembly.
2) Re-select drive zero upon head unload to allow CP/M to run
on the same controller as the Altair floppy disk that is
being copied (previously, CP/M had to have booted from
a floppy connected to a different controller).
3) Use bit 3 of the drive status register to detect presence
of a floppy instead of bit 5 (INTE). (The SIMH and Altair32
emulators do not properly set/clear INTE.)
These files have been uploaded to the "Burcon CP/M" folder in the Files section.