Re: building one
- You connected the coils in parallel.
If you want 80 ohms then connect them in series.
--- In email@example.com, "ronmathenyjr"
> --- In firstname.lastname@example.org, "ronmathenyjr"<ronmathenyjr@y...>
> > Started this project in Jan of 05. Want to have completed by
> > end. Made A plastic stator housing about 21 and 1/4 inchesinside
> > diamater. Made my own mags for stator and purchased mags forrotor.
> > Currently working on commutor for firing stator mags. Anythoughts or
> > suggestions would be appreciated. I do not have any knowledge inof #
> > electronics but have purchased A study book and am learning.
> ron My stator mags are homemade. Four of them. They are made
> 22 guage wire with an average of 1150 wraps. My meter showed Athem
> resistance "in ohms" of 40 to 45 in each of them. I installed
> into the housing "plastic" and now have two of them wiredtogether. My
> resistance is now 19 to 20 ohms. I expected this to be around 80to 90
> ohms. Did I do somthing wrong, or is this the way electronicswork?
> Help me if you can, still want to fire this thing up by years end.
> Thanks ron