Loading ...
Sorry, an error occurred while loading the content.

yugoracing

Expand Messages
  • yugoracing2000
    Zanima mene kdo je KOKA,prosim ����e mi lahko po�����lje����� svoj e-mail.imam nekaj upra�����anj zate.
    Message 1 of 82 , Dec 25, 2000
    View Source
    • 0 Attachment
      Zanima mene kdo je KOKA,prosim �e mi lahko po�lje� svoj e-mail.imam nekaj upra�anj zate.
    • koolyugo
      hi thanks for the info but i have all ready done the head, i have lighty ported the inlet and the exhaust ports. i have allso put a cam in it set to (3000 rpm
      Message 82 of 82 , May 15, 2002
      View Source
      • 0 Attachment
        hi thanks for the info but i have all ready done the head, i have
        lighty ported the inlet and the exhaust ports. i have allso put a cam
        in it set to (3000 rpm to 6000 rpm) and put a vener cam in it.
        thanks eny way
        jason

        w



        --- In YUGORACEANDPERFORMANCECARS@y..., yuabarth <no_reply@y...>
        wrote:
        > I just came back to this group so i don't know if someone already
        > answered this (except me :)
        >
        > Like I said, 1100, 1300, 1500 have the same valves. The difference
        is
        > in post sizes. I thing that 1300 and 1500 heads have the same port
        > diameters, but 1100 head have very small ports.
        >
        > The only head you can use is the head from Yugo Florida 1400 or
        fiat
        > tipo 1400 I.E. They have 37.5mm inlet valves, and standard 31mm
        > exhaust.
        >
        > And again, as I said before, I can make you a good head, with big
        > (wery big if you wish) valves for about 200$, but the main problem
        is
        > the transport of the head - I'm in Serbia.
        >
        > regards,
        > Uros
        >
        >
        > --- In YUGORACEANDPERFORMANCECARS@y..., koolyugo wrote:
        > > i am look to put a bigger head on my yugo 1300cc
        > > mabey put a 1500cc head on it but i do not know if the
        > > valve size is eny bigger in the end that is what i want
        > > to achive is to put biggger vales in it and to boor
        > > out the manfalds. <br> hopw you can help jason
      Your message has been successfully submitted and would be delivered to recipients shortly.