(7)Hi Henry, Keep the wife happy!!! That is the first and foremost thing!!! What Luk does, I think of as an open pyrolysis zone machine. He adds just enough
(12)I thought we left them in the DeLorean....?(Don't blame me....YOU forgot to pour the Marguarita Mix into the fuel intake thingey!)Did your snow melt up there
(8)Actually you can do it 2 ways, 4poles in the case or 4 poles on the armature. In the amateur way you would separate the 2 case windings into red and black with
Fetching Sponsored Content...
(5)Dave, Thank you for your concer and advice. Luk From: mailto:WoodGas@yahoogroups.com Sent: Thursday, April 16, 2015 2:36 AM To: WoodGas@yahoogroups.com
(3)Thank you, Kevin. To the rest of your questions: Yes. This guy Josh, got started by running single cylinder engines. The one caveat is these systems usually
(7)Stephen, Just use the description area to describe the low end and top end of the units capabilities as best you can. Even state that these are not one size
(8)Hi Stephen and all, Thanks to everyone for your suggestions. I'll probably try most of them in some combination, or after trying the changes one at a time. I
(6)Ken, I have several concerns with this plan. First is running inside the garage. A weld or fitting on the exhaust could fail at any time, filling the garage
(11)Pic downloaded for me as mp4, had to rename as jpg to view.
(3)Mannes, Thank you for the support and subscribing the new channel. I am curently adapting my grateless a little. The former had a too narrow drop tube. Fuel
(3)I am going to redo the test. I need to check everything more closely. I doubt the gas exit temperature was significantly different based on the metal color
View First Topic Go to
Loading 1 - 11 of total 11 topics