Loading ...
Sorry, an error occurred while loading the content.

22294[William Optics] Re: FLT110 focus wobble

Expand Messages
  • Timm B
    Mar 31, 2013
    • 0 Attachment
      Ray,

      The 2 silver screws probably shouldn't need to be tightened.

      Mine has wobble NOT because of the focuser tube, but the entire focuser on the rotation base. Can you try something for me?

      Loosen the silver thumbscrew that locks the focuser rotation. Does it now wobble more? If so, see how loose the three nylon black screws are and try to carefully tighten them to see if the wobble goes away. Once mine were tight, it didn't wobble, but then it doesn't rotation smoothly, so here is what I did.

      Remove the silver thumbscrew that locks the focuser rotation. Remove all three of the nylon black screws. Remove the focuser. Apply a thin layer of high quality white lithium grease to the retaining ring. Reassemble, and tighten the nylon screws enough so there is no wobble, and it still is able to rotate.

      This is what worked for me, let me know if it works for you.

      I can provide a detailed adjustment procedure as well if you like, but it really is just the tension screw on the bottom, the bottom tension lock, and the 2 silver extra tension screws that can be adjusted. I can explain more about how the focuser works if you like.

      And Happy Easter!

      Timm

      --- In William-Optics@yahoogroups.com, "Ray Hurst" <ka4gbr@...> wrote:
      >
      > I guess all focusers wobble to some degree.
      >
      > I thinks it's better to use an extender so the focuser doesn't extend more
      > than half way out.
      >
      > This will give it more stability.
      >
      > Maybe I am spoiled with feathertouch focusers.
      >
      > Is there a detailed adjustment procedure for the DDG focuser?
      >
      > It seems that the 2 silver screws on the side must have a sweet spot where
      >
      > It isn't too loose or too tight.
      >
      >
      >
      > Ray
      >
      >
      >
      >
      >
      >
      >
      > From: William-Optics@yahoogroups.com [mailto:William-Optics@yahoogroups.com]
      > On Behalf Of Timm B
      > Sent: Sunday, March 31, 2013 5:36 PM
      > To: William-Optics@yahoogroups.com
      > Subject: [William Optics] Re: FLT110 focus wobble
      >
      >
      >
      >
      >
      > Is it the new R&P focuser?
      >
      > Not sure how it can wobble, unless you mean the rotation part.
      >
      > Timm
      >
      > --- In William-Optics@yahoogroups.com
      > <mailto:William-Optics%40yahoogroups.com> , "Ray Hurst" <ka4gbr@> wrote:
      > >
      > > I have some play in my DDG focuser on my GTF-81 also.
      > >
      > > I found that a 2 inch extender helps.
      > >
      > > This causes the focuser to work without being extended too much.
      > >
      > > Ray
      > >
      > >
      > >
      > >
      > >
      > > From: William-Optics@yahoogroups.com
      > <mailto:William-Optics%40yahoogroups.com>
      > [mailto:William-Optics@yahoogroups.com
      > <mailto:William-Optics%40yahoogroups.com> ]
      > > On Behalf Of Timm B
      > > Sent: Thursday, March 28, 2013 9:38 PM
      > > To: William-Optics@yahoogroups.com
      > <mailto:William-Optics%40yahoogroups.com>
      > > Subject: [William Optics] Re: FLT110 focus wobble
      > >
      > >
      > >
      > >
      > >
      > > Hi
      > >
      > > Those two large silver screws on the side of the new R&P DDG focuser are
      > for
      > > putting extra resistance on the internal teflon pressure pieces to
      > increase
      > > friction of the tube if needed.
      > >
      > > I'm pretty familiar with the new R&P focuser so if anyone has questions
      > just
      > > let me know.
      > >
      > > Timm
      > >
      > > --- In William-Optics@yahoogroups.com
      > <mailto:William-Optics%40yahoogroups.com>
      > > <mailto:William-Optics%40yahoogroups.com> , "ajtdebruin" <ajtdebruin@>
      > > wrote:
      > > >
      > > >
      > > >
      > > >
      > > >
      > > > Btw, what purpose serve those two large silver screws to the right of
      > the
      > > ddg display?
      > > >
      > > > --- In William-Optics@yahoogroups.com
      > <mailto:William-Optics%40yahoogroups.com>
      > > <mailto:William-Optics%40yahoogroups.com> , "ajtdebruin" wrote:
      > > > >
      > > > > Hi everybody, I am new here. I just bought a FLT 110 and there seems
      > to
      > > be a lot of play in the focuser espescialy if fully extended! By that I
      > mean
      > > that I can "lift" the tube. Perhaps the tube hangs in the r&p focuser by
      > > design? Thanks
      > > > >
      > > >
      > >
      >
    • Show all 9 messages in this topic