Re: British Artillery
- We already have a grasshopper carriage but it is the wrong one.
Our tube is a light infantry brass 3pdr Verbrugen. If you look in
Grasshoppers and Butterflies on page 12 the bottom tube is the same as
the one that we have. In the reasearch we have done this tube appears
to have been om a Congreve carriage.
As you mention Fort Malden I will phone a friend of mine who works at
the fort and ask him to put a copy aside for me.
The only thing I need is the plans. I have all the wood (white oak) My
father is a blacksmith and have access to all the equipment that we
will need. This I know because we have already built a grasshopper
If you know where a set af plans may be obtained please let me know.
Thank you for your adviceand help
Kings Royal Yorkers
--- In WarOf1812@yahoogroups.com, "Gordon Deans" <gord.deans@...> wrote:
> If you are planning to build a full-scale British light 3-pounder
> field carriage be advised that the current retail price is $8,500 US.
> You will need a set of full-scale plans which will also be
> comparatively expensive whether you get them from an archives or a
> current manufacturer. Do-it-yourself projects from pictures and plans
> in publicly available books will only be as good as your eyesight and
> as good as the audience's eyesight is bad. The only possible shortcut
> would be to make friends with a gun crew and copy their carriage and
> hope that it was authentic.
> To be repetitive, this is my first artillery reference of choice. I
> have most of the other books available as backup but rarely find
> anything of additional value. This book can still be obtained from
> the Volunteers of Fort Malden gift shop at Fort Malden in Amherstburg
> Ontario for $40 CAN. (We purchased another copy this past weekend for
> our membership.)
> BRITISH SMOOTH-BORE ARTILLERY:
> A TECHNOLOGICAL STUDY TO SUPPORT IDENTIFICATION, ACQUISITION,
> RESTORATION, REPRODUCTION, AND INTERPRETATION OF ARTILLERY
> AT NATIONAL HISTORIC PARKS IN CANADA
> by DAVID McCONNELL, 1988, ISBN 0-660-12750-4.
> See Travelling Carriages, pages 188 - 210.
> In over-simplified terms, 3-Pounders occurred in a range of sizes from
> LIGHT which were very roughly 3 foot barrel, 3 hundred weight barrel,
> 3 inch bore, OR LESS, through SEMI-LIGHT which were roughly 4 foot
> barrel, over 3-4 hundred weight barrel, 3 inch bore, and HEAVY which
> were very roughly 6 foot barrel, 6 hundred weight barrel, 3 inch bore,
> OR MORE.
> The variations and contradictions involving LIGHT 3-pounders are too
> numerous to list. However a few are instructive. They were
> considered obsolete before 1800, yet new models were issued in 1810
> and 1813. They impressed our Native Allies and some American units
> but were ineffective against even log curtained forts. New models
> continued to be introduced and used up to 1859.
> Brass Guns - 3-Pounder. See pages 47-50 which indicate 7 examples of
> brass light 3-pounders in Parks Canada collections dating from 1779 to
> Iron Guns - 3-Pounder. See pages 92-94 which indicate only 3 examples
> of iron light 3-pounders in Parks Canada collections but without the
> Royal Cypher and the broad arrow suggesting they belonged to the
> Hudson's Bay Company.
> Travelling Carriages. See pages 188-210. Numerous definitions,
> dimensions and explanations. Many side and top view diagrams except
> when reduced to fit 8 1/2" x 11" pages renders the text unreadable. If
> you need working plans you will have to refer back to the originals in
> the archives.
> Page 199 Plan of a Galloper Carriage.
> Page 200 Views of Light 3-Pounder Mountain Service Carriage.
> Page 203 Plan of Light 3-Pounder Colonial Service Carriage.
> Page 195 Plan of Heavy 6-Pounder Travelling Carriage.
> Page 202 Plan of Light 6-Pounder Carriage.
> Page 204 Plan of 6-Pounder S.B. Field Carriage.
> All of the above interspersed with other sizes of carriages which are
> similar in design except for the dimensions.
> Our unit's brass and iron "3-Pounders" are both mounted upon Butterfly
> carriages by William Congreve which can be distinguished from the
> Grasshopper carriages of James Pattison by the presence of two side
> boxes resting on the axletrees and the ammunition box between the
> brackets to the rear of the gun.
> The scale of a 3-Pounder Field Carriage is closely related to the
> LIGHT 3-pounder barrel statistics which can vary from under 3 feet to
> almost 4 feet (SEMI-LIGHT) and from 2 1/2 hundred weight to over 3
> hundred weight (1 hundred weight = 112 pounds). Mismatches can be
> extremely difficult and tiring to move and work in the field. Balance
> and proportion is everything.
> Craig is correct, "Grasshoppers and Butterflies" by Adrian Caruana is
> the best other source but its plans and views are even more reduced in
> size and difficult to decipher.
> "On Sunday July 17, [1814 ... ] At 1:10 PM the British fired their
> brass 3-pounder cannon and the battle [of the Prairie Dogs] for
> Prairie du Chien began.15 Initially the British concentrated their
> artillery fire on the Governor Clark managing several direct hits.
> Some of these hits caused the boat to begin leaking, and after two
> hours the men on board cut their cable and floated downstream for
> repairs. The regulars in the fort [Fort Shelby], seeing the boat
> leaving, called for it to return and reputedly fired a round across
> its bow to induce it to do so.16 The Governor Clark stopped briefly at
> the mouth of the Wisconsin river to repair some of the damage and
> continued down river.
> For the next two days the fighting continued at Prairie du Chien. Both
> sides kept up a relatively constant but ineffectual fire on one
> another. But by the evening of July 19, things were getting desperate
> for the Americans. It had now become obvious that the Clark was not
> returning, the ammunition supply for the [American] 3- and 6-pounder
> cannons was nearly expended, and there were no hospital supplies. The
> water supply was also exhausted. During the fighting the well had gone
> dry, and an attempt to deepen it resulted in its collapse. The final
> problem that forced the American officers to decide to surrender was
> evidence of British intentions to attack the wooden works with red-hot
> iron shot.18 "
> The British drag a brass 3-pounder all of the way from Michilimackinac
> to Prairie du Chien, Wisconsin, mainly to impress their Native Allies
> of their commitment to the expedition and end up driving off a ship in
> the river and defeating a fort armed with a 3-pounder and a 6-pounder
> with the perceived threat of firing some red-hot cannon balls and
> possibly burning some log walls in the fort. A more competent
> American fort commander would have died laughing in the face of a
> British enemy armed only with one 3-pounder cannon.
> C'est la Guerre.
> Gord Deans, Gunner,
> HMS Charwell Landing Party,
> Royal Navy, Upper Canada.
> P.S. Please don't even get me started about Proctor.
> ----- Original Message -----
> From: "Craig Williams" <sgtwarner@...>
> To: <WarOf1812@yahoogroups.com>
> Sent: Tuesday, October 03, 2006 12:10 PM
> Subject: Re: [WarOf1812] British Artillery
> | Ok, who has a copy of "Butterfly's and Grasshoppers" for this man?
> | I would like to know the consensus of those who make artillery
> | their vocation as to the likelyhood or level of deployment of the
> | 3pdr on a field carriage during the 1812 war.
> | The Royal Marines were still using this gun as it was light and
> | easily transported in the boats, but I have not come across specific
> | reference to them being deployed as an infantry support weapon with
> | the army in Upper Canada.
> | 6's and 9's yes, but 3's...?
> | Craig Williams
> | > Hi I am looking to find plans for a Congreve Carriage for a Light
> | > Infantry 3pdr. This is also known as a Butterfly Carriage.
> | > Plans for a Light 6pdr Traveling Carriage would be a large help.
> | > Thank You
- Pete Walker wrote:
" Our tube is a light infantry brass 3pdr The only thing I need
is the plans "
If you decide to forget the plans and let your father off the hook
22799 Kintyre Line
Canada N0L 2C0
(519) 785 2215
He has no email
Ken made a Naval and Royal Artillery carriage for my tube and I was
very impressed - - especially for the price which was not a second
If you however decide to look for the plans I suggest you contact
the UK Army
Your contact at Fort Malden would be John MacLeod
One should be prepared to offer to PAY for the plans it is only
right and just that one do this ...
- The plans will not be forgoten. This is a project that will be done.
John is a friend and I have been in contact already.
Thank you for the information
In WarOf1812@yahoogroups.com, "larrylozon" <larrylozon@...> wrote:
> Pete Walker wrote:
> " Our tube is a light infantry brass 3pdr The only thing I need
> is the plans "
> Mr. Walker
> If you decide to forget the plans and let your father off the hook
> Ken Fisher
> RR #1
> 22799 Kintyre Line
> Rodney, Ontario
> Canada N0L 2C0
> (519) 785 2215
> He has no email
> Ken made a Naval and Royal Artillery carriage for my tube and I was
> very impressed - - especially for the price which was not a second
> If you however decide to look for the plans I suggest you contact
> the UK Army
> Your contact at Fort Malden would be John MacLeod
> One should be prepared to offer to PAY for the plans it is only
> right and just that one do this ...