Loading ...
Sorry, an error occurred while loading the content.

Re: [V4Protocol] Getting Started: Frequencies?

Expand Messages
  • Ed Woods WD9DVA
    when are you qrv? ... From: Ron Werthman To: V4Protocol@yahoogroups.com Sent: Wednesday, April 13, 2011 02:46 Subject: Re: [V4Protocol] Getting Started:
    Message 1 of 15 , Apr 13, 2011
    • 0 Attachment
      
      when are you qrv?
      ----- Original Message -----
      Sent: Wednesday, April 13, 2011 02:46
      Subject: Re: [V4Protocol] Getting Started: Frequencies?

       

      I call CQ on 7.073 and 14.073 every once and a while let me know if you have a specific time in mind. I have not had a contact using V4 yet.


      From: rich3x <rh3x@...>
      To: V4Protocol@yahoogroups.com
      Sent: Tue, April 12, 2011 2:48:17 PM
      Subject: [V4Protocol] Getting Started: Frequencies?

       

      Would someone pse pass along the HF freqs being used for V4 mode.

      Thanks, Rich/N2JR

    • rich3x
      Thanks all for responding. Seems like 7073 and 14103 are the sweet spots! Now all I need to do is figure out how to call CQ and how to establish a QSO.
      Message 2 of 15 , Apr 13, 2011
      • 0 Attachment
        Thanks all for responding. Seems like 7073 and 14103 are the sweet spots! Now all I need to do is figure out how to call CQ and how to establish a QSO. Will sit on 14103 all day today Wed 4/13 see what happens.

        de Rich/N2JR FM18 Va.

        --- In V4Protocol@yahoogroups.com, "Ed Woods WD9DVA" <wd9dva@...> wrote:
        >
        > when are you qrv?
        > ----- Original Message -----
        > From: Ron Werthman
        > To: V4Protocol@yahoogroups.com
        > Sent: Wednesday, April 13, 2011 02:46
        > Subject: Re: [V4Protocol] Getting Started: Frequencies?
        >
        >
        >
        >
        > I call CQ on 7.073 and 14.073 every once and a while let me know if you have a specific time in mind. I have not had a contact using V4 yet.
        >
        >
        >
        >
        > ------------------------------------------------------------------------------
        > From: rich3x <rh3x@...>
        > To: V4Protocol@yahoogroups.com
        > Sent: Tue, April 12, 2011 2:48:17 PM
        > Subject: [V4Protocol] Getting Started: Frequencies?
        >
        >
        > Would someone pse pass along the HF freqs being used for V4 mode.
        >
        > Thanks, Rich/N2JR
        >
      • Ron Werthman
        I just called cq on 14.103 but you may be inside my skip zone @ 480 miles. 40M would prob work better. ________________________________ From: rich3x
        Message 3 of 15 , Apr 13, 2011
        • 0 Attachment
          I just called cq on 14.103 but you may be inside my skip zone @ 480 miles. 40M would prob work better.




          From: rich3x <rh3x@...>
          To: V4Protocol@yahoogroups.com
          Sent: Wed, April 13, 2011 10:37:47 AM
          Subject: [V4Protocol] Re: Getting Started: Frequencies?

           

          Thanks all for responding. Seems like 7073 and 14103 are the sweet spots! Now all I need to do is figure out how to call CQ and how to establish a QSO. Will sit on 14103 all day today Wed 4/13 see what happens.

          de Rich/N2JR FM18 Va.

          --- In V4Protocol@yahoogroups.com, "Ed Woods WD9DVA" <wd9dva@...> wrote:
          >
          > when are you qrv?
          > ----- Original Message -----
          > From: Ron Werthman
          > To: V4Protocol@yahoogroups.com
          > Sent: Wednesday, April 13, 2011 02:46
          > Subject: Re: [V4Protocol] Getting Started: Frequencies?
          >
          >
          >
          >
          > I call CQ on 7.073 and 14.073 every once and a while let me know if you have a specific time in mind. I have not had a contact using V4 yet.
          >
          >
          >
          >
          > ----------------------------------------------------------
          > From: rich3x <rh3x@...>
          > To: V4Protocol@yahoogroups.com
          > Sent: Tue, April 12, 2011 2:48:17 PM
          > Subject: [V4Protocol] Getting Started: Frequencies?
          >
          >
          > Would someone pse pass along the HF freqs being used for V4 mode.
          >
          > Thanks, Rich/N2JR
          >

        • Ron Werthman
          Ottawa ont canada. VA3ACZ ________________________________ From: Ed Woods WD9DVA To: V4Protocol@yahoogroups.com Sent: Wed, April 13,
          Message 4 of 15 , Apr 13, 2011
          • 0 Attachment
            Ottawa ont canada.  VA3ACZ



            From: Ed Woods WD9DVA <wd9dva@...>
            To: V4Protocol@yahoogroups.com
            Sent: Wed, April 13, 2011 10:07:56 AM
            Subject: Re: [V4Protocol] Getting Started: Frequencies?

             

            

            when are you qrv?
            ----- Original Message -----
            Sent: Wednesday, April 13, 2011 02:46
            Subject: Re: [V4Protocol] Getting Started: Frequencies?

             

            I call CQ on 7.073 and 14.073 every once and a while let me know if you have a specific time in mind. I have not had a contact using V4 yet.


            From: rich3x <rh3x@...>
            To: V4Protocol@yahoogroups.com
            Sent: Tue, April 12, 2011 2:48:17 PM
            Subject: [V4Protocol] Getting Started: Frequencies?

             

            Would someone pse pass along the HF freqs being used for V4 mode.

            Thanks, Rich/N2JR

          • Howard
            ... There is no real active use of the application at the moment it seems. The protocol is really an FEC mode which doesn t have ARQ capability. It was in
            Message 5 of 15 , Apr 19, 2011
            • 0 Attachment
              --- In V4Protocol@yahoogroups.com, Ron Werthman <ron_werthman@...> wrote:
              >
              > Ottawa ont canada. VA3ACZ
              >
              > ________________________________
              > From: Ed Woods WD9DVA <wd9dva@...>
              > To: V4Protocol@yahoogroups.com
              > Sent: Wed, April 13, 2011 10:07:56 AM
              > Subject: Re: [V4Protocol] Getting Started: Frequencies?
              >
              > 
              > when are you qrv?
              > ----- Original Message -----
              > >From: Ron Werthman
              > >To: V4Protocol@yahoogroups.com
              > >Sent: Wednesday, April 13, 2011 02:46
              > >Subject: Re: [V4Protocol] Getting Started: Frequencies?
              > >
              > >
              > >I call CQ on 7.073 and 14.073 every once and a while let me know if you have
              > >a specific time in mind. I have not had a contact using V4 yet.
              > >
              > ________________________________
              > From: rich3x <rh3x@...>
              > >To: V4Protocol@yahoogroups.com
              > >Sent: Tue, April 12, 2011 2:48:17 PM
              > >Subject: [V4Protocol] Getting Started: Frequencies?
              > >
              > >Would someone pse pass along the HF freqs being used for V4 mode.
              > >
              > >Thanks, Rich/N2JR



              There is no real active use of the application at the moment it seems. The protocol is really an FEC mode which doesn't have ARQ capability. It was in use for a while, then slowly died off while we waited for the issue of a new and improved program.

              I just received my QST today, and found an announcement about Rick and a short overview of the protocol and how to join this group and download the program. As yet, I have not seen the next upgrade but it probably won't be long now before it appears.

              Otherwise, go into the file section and download the full install to get your feet wet. The two frequencies mentioned are as good as any. I'd just post your intentions here with whatever frequency listed that you want to use at the moment and then monitor for a connection.

              Howard W6IDS
              Richmond, IN EM79NV
            • Ian Wade G3NRW
              From: rich3x Date: Wed, 13 Apr 2011 Time: 14:37:47 ... Hi Rich The place to go to arrange skeds is:
              Message 6 of 15 , Apr 19, 2011
              • 0 Attachment
                From: rich3x <rh3x@...>
                Date: Wed, 13 Apr 2011 Time: 14:37:47

                >Thanks all for responding. Seems like 7073 and 14103 are the sweet
                >spots! Now all I need to do is figure out how to call CQ and how to
                >establish a QSO. Will sit on 14103 all day today Wed 4/13 see what
                >happens.
                >
                >de Rich/N2JR FM18 Va.
                >


                Hi Rich

                The place to go to arrange skeds is:

                http://www.obriensweb.com/sked/index.php?page=digital

                --
                73
                Ian, G3NRW

                The TS-590S Resources Page:
                http://homepage.ntlworld.com/wadei/ts-590s.htm
              • Ron Werthman
                Now. Been calling cq on 14.073 for a few hours now. Sent from my iPod ... There is no real active use of the application at the moment it seems. The protocol
                Message 7 of 15 , Apr 20, 2011
                • 0 Attachment
                  Now. Been calling cq on 14.073 for a few hours now.


                  Sent from my iPod

                  On 2011-04-19, at 7:32 PM, "Howard" <w6ids@...> wrote:

                   



                  --- In V4Protocol@yahoogroups.com, Ron Werthman <ron_werthman@...> wrote:
                  >
                  > Ottawa ont canada. VA3ACZ
                  >
                  > ________________________________
                  > From: Ed Woods WD9DVA <wd9dva@...>
                  > To: V4Protocol@yahoogroups.com
                  > Sent: Wed, April 13, 2011 10:07:56 AM
                  > Subject: Re: [V4Protocol] Getting Started: Frequencies?
                  >
                  > 
                  > when are you qrv?
                  > ----- Original Message -----
                  > >From: Ron Werthman
                  > >To: V4Protocol@yahoogroups.com
                  > >Sent: Wednesday, April 13, 2011 02:46
                  > >Subject: Re: [V4Protocol] Getting Started: Frequencies?
                  > >
                  > >
                  > >I call CQ on 7.073 and 14.073 every once and a while let me know if you have
                  > >a specific time in mind. I have not had a contact using V4 yet.
                  > >
                  > ________________________________
                  > From: rich3x <rh3x@...>
                  > >To: V4Protocol@yahoogroups.com
                  > >Sent: Tue, April 12, 2011 2:48:17 PM
                  > >Subject: [V4Protocol] Getting Started: Frequencies?
                  > >
                  > >Would someone pse pass along the HF freqs being used for V4 mode.
                  > >
                  > >Thanks, Rich/N2JR

                  There is no real active use of the application at the moment it seems. The protocol is really an FEC mode which doesn't have ARQ capability. It was in use for a while, then slowly died off while we waited for the issue of a new and improved program.

                  I just received my QST today, and found an announcement about Rick and a short overview of the protocol and how to join this group and download the program. As yet, I have not seen the next upgrade but it probably won't be long now before it appears.

                  Otherwise, go into the file section and download the full install to get your feet wet. The two frequencies mentioned are as good as any. I'd just post your intentions here with whatever frequency listed that you want to use at the moment and then monitor for a connection.

                  Howard W6IDS
                  Richmond, IN EM79NV

                • Robert Belize
                  I would love to test the 200Hz ARQ mode. Rick, please let us know...say something...please... Robert V31AE
                  Message 8 of 15 , Apr 21, 2011
                  • 0 Attachment
                    I would love to test the 200Hz ARQ mode.
                    Rick, please let us know...say something...please...
                    Robert V31AE



                    --- In V4Protocol@yahoogroups.com, "Howard" <w6ids@...> wrote:
                    >
                    >
                    >
                    > --- In V4Protocol@yahoogroups.com, Ron Werthman <ron_werthman@> wrote:
                    > >
                    > > Ottawa ont canada. VA3ACZ
                    > >
                    > > ________________________________
                    > > From: Ed Woods WD9DVA <wd9dva@>
                    > > To: V4Protocol@yahoogroups.com
                    > > Sent: Wed, April 13, 2011 10:07:56 AM
                    > > Subject: Re: [V4Protocol] Getting Started: Frequencies?
                    > >
                    > > 
                    > > when are you qrv?
                    > > ----- Original Message -----
                    > > >From: Ron Werthman
                    > > >To: V4Protocol@yahoogroups.com
                    > > >Sent: Wednesday, April 13, 2011 02:46
                    > > >Subject: Re: [V4Protocol] Getting Started: Frequencies?
                    > > >
                    > > >
                    > > >I call CQ on 7.073 and 14.073 every once and a while let me know if you have
                    > > >a specific time in mind. I have not had a contact using V4 yet.
                    > > >
                    > > ________________________________
                    > > From: rich3x <rh3x@>
                    > > >To: V4Protocol@yahoogroups.com
                    > > >Sent: Tue, April 12, 2011 2:48:17 PM
                    > > >Subject: [V4Protocol] Getting Started: Frequencies?
                    > > >
                    > > >Would someone pse pass along the HF freqs being used for V4 mode.
                    > > >
                    > > >Thanks, Rich/N2JR
                    >
                    >
                    >
                    > There is no real active use of the application at the moment it seems. The protocol is really an FEC mode which doesn't have ARQ capability. It was in use for a while, then slowly died off while we waited for the issue of a new and improved program.
                    >
                    > I just received my QST today, and found an announcement about Rick and a short overview of the protocol and how to join this group and download the program. As yet, I have not seen the next upgrade but it probably won't be long now before it appears.
                    >
                    > Otherwise, go into the file section and download the full install to get your feet wet. The two frequencies mentioned are as good as any. I'd just post your intentions here with whatever frequency listed that you want to use at the moment and then monitor for a connection.
                    >
                    > Howard W6IDS
                    > Richmond, IN EM79NV
                    >
                  • Ted Trostle
                    I finally got V4 working with my Flex 3000 and would like to do some QSO tests. I am in central PA so 7073 will probably be OK Email me direct please. Ted,
                    Message 9 of 15 , Apr 22, 2011
                    • 0 Attachment
                      I finally got V4 working with my Flex 3000 and would like to do some QSO tests. I am in central PA so 7073 will probably be OK

                      Email me direct please.

                      Ted, WB2LOU


                      On Wed, Apr 13, 2011 at 2:53 PM, Ron Werthman <ron_werthman@...> wrote:
                       

                      I just called cq on 14.103 but you may be inside my skip zone @ 480 miles. 40M would prob work better.




                      From: rich3x <rh3x@...>
                      To: V4Protocol@yahoogroups.com
                      Sent: Wed, April 13, 2011 10:37:47 AM
                      Subject: [V4Protocol] Re: Getting Started: Frequencies?

                       

                      Thanks all for responding. Seems like 7073 and 14103 are the sweet spots! Now all I need to do is figure out how to call CQ and how to establish a QSO. Will sit on 14103 all day today Wed 4/13 see what happens.

                      de Rich/N2JR FM18 Va.

                      --- In V4Protocol@yahoogroups.com, "Ed Woods WD9DVA" <wd9dva@...> wrote:
                      >
                      > when are you qrv?
                      > ----- Original Message -----
                      > From: Ron Werthman
                      > To: V4Protocol@yahoogroups.com
                      > Sent: Wednesday, April 13, 2011 02:46
                      > Subject: Re: [V4Protocol] Getting Started: Frequencies?
                      >
                      >
                      >
                      >
                      > I call CQ on 7.073 and 14.073 every once and a while let me know if you have a specific time in mind. I have not had a contact using V4 yet.
                      >
                      >
                      >
                      >
                      > ----------------------------------------------------------
                      > From: rich3x <rh3x@...>
                      > To: V4Protocol@yahoogroups.com
                      > Sent: Tue, April 12, 2011 2:48:17 PM
                      > Subject: [V4Protocol] Getting Started: Frequencies?
                      >
                      >
                      > Would someone pse pass along the HF freqs being used for V4 mode.
                      >
                      > Thanks, Rich/N2JR
                      >




                      --
                      You cannot change history, but you can make history!
                      Education is the only legal cure for stupidity.

                    • Ron Werthman
                      I will be monotoring 7.073 on and off for the rest of the day. If you send email with a time I will monitor more closely at that time.
                      Message 10 of 15 , Apr 22, 2011
                      • 0 Attachment
                        I will be monotoring 7.073 on and off for the rest of the day.  If you send email with a time I will monitor more closely at that time.


                        From: Ted Trostle <tctrostle@...>
                        To: V4Protocol@yahoogroups.com
                        Sent: Fri, April 22, 2011 9:56:58 AM
                        Subject: Re: [V4Protocol] Re: Getting Started: Frequencies?

                         

                        I finally got V4 working with my Flex 3000 and would like to do some QSO tests. I am in central PA so 7073 will probably be OK

                        Email me direct please.

                        Ted, WB2LOU


                        On Wed, Apr 13, 2011 at 2:53 PM, Ron Werthman <ron_werthman@...> wrote:
                         

                        I just called cq on 14.103 but you may be inside my skip zone @ 480 miles. 40M would prob work better.




                        From: rich3x <rh3x@...>
                        To: V4Protocol@yahoogroups.com
                        Sent: Wed, April 13, 2011 10:37:47 AM
                        Subject: [V4Protocol] Re: Getting Started: Frequencies?

                         

                        Thanks all for responding. Seems like 7073 and 14103 are the sweet spots! Now all I need to do is figure out how to call CQ and how to establish a QSO. Will sit on 14103 all day today Wed 4/13 see what happens.

                        de Rich/N2JR FM18 Va.

                        --- In V4Protocol@yahoogroups.com, "Ed Woods WD9DVA" <wd9dva@...> wrote:
                        >
                        > when are you qrv?
                        > ----- Original Message -----
                        > From: Ron Werthman
                        > To: V4Protocol@yahoogroups.com
                        > Sent: Wednesday, April 13, 2011 02:46
                        > Subject: Re: [V4Protocol] Getting Started: Frequencies?
                        >
                        >
                        >
                        >
                        > I call CQ on 7.073 and 14.073 every once and a while let me know if you have a specific time in mind. I have not had a contact using V4 yet.
                        >
                        >
                        >
                        >
                        > ----------------------------------------------------------
                        > From: rich3x <rh3x@...>
                        > To: V4Protocol@yahoogroups.com
                        > Sent: Tue, April 12, 2011 2:48:17 PM
                        > Subject: [V4Protocol] Getting Started: Frequencies?
                        >
                        >
                        > Would someone pse pass along the HF freqs being used for V4 mode.
                        >
                        > Thanks, Rich/N2JR
                        >




                        --
                        You cannot change history, but you can make history!
                        Education is the only legal cure for stupidity.

                      Your message has been successfully submitted and would be delivered to recipients shortly.