Loading ...
Sorry, an error occurred while loading the content.
 

V4Protocol and WIN 8

Expand Messages
  • David Boland
    I currently run XP Pro and my kids are here for Christmas and are recommending I bite the bullet and go to Win 8.  I am not currently operating on V4 but have
    Message 1 of 12 , Dec 26, 2012

      I currently run XP Pro and my kids are here for Christmas and are
      recommending I bite the bullet and go to Win 8.  I am not currently operating on V4
      but have it installed and would like to be able to operate
      When Win 8 comments have been on the reflectors I'm on I ignored since I
      never expected to go there
       
      Dave W9NWY
       
       
       


    • Leo yudysky
      David w9nwy I have Win 7 on this laptop and it works fine, I ve heard Win 8 is no great gain over 7 but if your way back in Xp or something it would be good to
      Message 2 of 12 , Dec 26, 2012
        David w9nwy
        I have Win 7 on this laptop and it works fine, I've heard Win 8 is no great gain over 7 but if your way back in Xp or something it would be good to do.  I've shed alot of problems since upgrading, use to have rf reboots every few minutes , since then I replace the laptop, put ferrite rings on everything, got a new tuner so that I can get the swr down flat.  It seems the tapped coil type tuners just don't get your swr down as well, just my observation. 
        Hope you get some more input on your idea....
        Leo
        kf7oni
        Whitefish, Montana

        From: David Boland <w9nwy@...>
        To: "V4Protocol@yahoogroups.com" <V4Protocol@yahoogroups.com>
        Sent: Wednesday, December 26, 2012 1:05 PM
        Subject: [V4Protocol] V4Protocol and WIN 8
         

        I currently run XP Pro and my kids are here for Christmas and are
        recommending I bite the bullet and go to Win 8.  I am not currently operating on V4
        but have it installed and would like to be able to operate
        When Win 8 comments have been on the reflectors I'm on I ignored since I
        never expected to go there
         
        Dave W9NWY
         
         
         
      • Ron Wenig
        I just installed V4 Chat on my new Windows 8 machine and it works fine. I installed a program called Start8 and it looks just like Windows 7 with the start
        Message 3 of 12 , Dec 26, 2012
          I just installed V4 Chat on my new Windows 8 machine and it works fine.  I installed a program called Start8 and it looks just like Windows 7 with the start bar.  When you install V4 Chat it will warn you against installing it.  Be sure to click details and then ok to install it.  It will install in the root directory so you don't have to worry about being in a protected directory like program files.

          Ron ny3j

          On 12/26/2012 3:33 PM, Leo yudysky wrote:
           
          David w9nwy
          I have Win 7 on this laptop and it works fine, I've heard Win 8 is no great gain over 7 but if your way back in Xp or something it would be good to do.  I've shed alot of problems since upgrading, use to have rf reboots every few minutes , since then I replace the laptop, put ferrite rings on everything, got a new tuner so that I can get the swr down flat.  It seems the tapped coil type tuners just don't get your swr down as well, just my observation. 
          Hope you get some more input on your idea....
          Leo
          kf7oni
          Whitefish, Montana

          From: David Boland <w9nwy@...>
          To: "V4Protocol@yahoogroups.com" <V4Protocol@yahoogroups.com>
          Sent: Wednesday, December 26, 2012 1:05 PM
          Subject: [V4Protocol] V4Protocol and WIN 8
           

          I currently run XP Pro and my kids are here for Christmas and are
          recommending I bite the bullet and go to Win 8.  I am not currently operating on V4
          but have it installed and would like to be able to operate
          When Win 8 comments have been on the reflectors I'm on I ignored since I
          never expected to go there
           
          Dave W9NWY
           
           
           

        • Leo yudysky
          Dave, wb0kgn That s an excellent point you bring up about a counterpoise for that type of antenna, right on the money.  Just bet he is getting rf back into
          Message 4 of 12 , Dec 26, 2012
            Dave, wb0kgn
            That's an excellent point you bring up about a counterpoise for that type of antenna, right on the money.  Just bet he is getting rf back into the shack, it has all the symptoms doesn't it?
            My wife has a simple DXLB 160-10 dipole and it doesn't take much real estate and works great, very do-able.  I have it top hat style or level , I would have liked to droop the ends for better lower angle take off but I didn't want to have any ground obstacles.  Even my back guys for my tower I put up 6 feet to keep the deer from hanging themselves. 
            Leo kf7oni

            From: "wb0kgn@..." <wb0kgn@...>
            To: V4Protocol@yahoogroups.com
            Sent: Wednesday, December 26, 2012 11:47 AM
            Subject: Re: [V4Protocol] 20 and 40 meters
             
            Grounding??  Does the system have the equivalent of a counterpoise??
            Dave wb0kgn
            From: "Paul Harris" <kb2vec@...>To: V4Protocol@yahoogroups.comSent: Wednesday, December 26, 2012 6:08:23 AMSubject: Re: [V4Protocol] 20 and 40 meters 
            Leo,  No ferrite beads just coil wire into air choke, the tuner is a MFJ 945E mobile tuner and the rig is a Yaesu 897D. Antenna is a end fed 24 ft long sloper. As long as I stay at 40 watts or lower nothing happens. But you know if enough is good more is better. Paul
            From: Leo yudysky <lyudysky@...>
            To: "V4Protocol@yahoogroups.com" <V4Protocol@yahoogroups.com>
            Sent: Tuesday, December 25, 2012 10:02 PM
            Subject: Re: [V4Protocol] 20 and 40 meters
             
            Paul,
            I had that problem before too!!
            What kind of tuner do you have?
            Do you have ferrite rings on all leads to your computer?
            I changed out my old tuner , a Kenwood tapped coil, AT180 with a Palstar AT4k, I believe it cured it for me...
            Leo
            kf7oni
            Whitefish, Mt.
            p.s. thanks for the post as I was wondering why I couldn't find you that day. 

            From: Paul Harris <kb2vec@...>
            To: "V4Protocol@yahoogroups.com" <V4Protocol@yahoogroups.com>
            Sent: Monday, December 24, 2012 7:26 PM
            Subject: [V4Protocol] 20 and 40 meters
             
            Heard WB6JFH,N4AY,KF7ONI on 20 meters 22:37 utc.
            Heard N4AY on 40,  Trouble is they couldnt hear me, I ran  kit up to 50 watts and had RF freeze computer.
            Paul KB2VEC.
          • wb0kgn@q.com
            I have four guys for my tower. Two are used also for 40 meter inverted vee, and tow for 80 meter inverted vee. I used three eights inch stainless steel cable
            Message 5 of 12 , Dec 26, 2012
              I have four guys for my tower.  Two are used also for 40 meter inverted vee, and tow for 80 meter inverted vee.  I used three eights inch stainless steel cable and compression insulators.  Two of the guys are held up with three inch caste iron water pipe 20 feet long.  I couldn't handle a 20 foot section of pipe, so I had it cut and used pipe unions.  I put a 10 foot section in the ground using a water hose down the inside of the pipe.  This left a hole double the diameter needed for the pipe...so I filled it with concrete.    Then I fastened the other ten feet.     

              Dave


              From: "Leo yudysky" <lyudysky@...>
              To: V4Protocol@yahoogroups.com
              Sent: Wednesday, December 26, 2012 6:19:59 PM
              Subject: Re: [V4Protocol] 20 and 40 meters

               

              Dave, wb0kgn
              That's an excellent point you bring up about a counterpoise for that type of antenna, right on the money.  Just bet he is getting rf back into the shack, it has all the symptoms doesn't it?
              My wife has a simple DXLB 160-10 dipole and it doesn't take much real estate and works great, very do-able.  I have it top hat style or level , I would have liked to droop the ends for better lower angle take off but I didn't want to have any ground obstacles.  Even my back guys for my tower I put up 6 feet to keep the deer from hanging themselves. 
              Leo kf7oni

              From: "wb0kgn@..." <wb0kgn@...>
              To: V4Protocol@yahoogroups.com
              Sent: Wednesday, December 26, 2012 11:47 AM
              Subject: Re: [V4Protocol] 20 and 40 meters
               
              Grounding??  Does the system have the equivalent of a counterpoise??
              Dave wb0kgn
              From: "Paul Harris" <kb2vec@...>To: V4Protocol@yahoogroups.comSent: Wednesday, December 26, 2012 6:08:23 AMSubject: Re: [V4Protocol] 20 and 40 meters 
              Leo,  No ferrite beads just coil wire into air choke, the tuner is a MFJ 945E mobile tuner and the rig is a Yaesu 897D. Antenna is a end fed 24 ft long sloper. As long as I stay at 40 watts or lower nothing happens. But you know if enough is good more is better. Paul
              From: Leo yudysky <lyudysky@...>
              To: "V4Protocol@yahoogroups.com" <V4Protocol@yahoogroups.com>
              Sent: Tuesday, December 25, 2012 10:02 PM
              Subject: Re: [V4Protocol] 20 and 40 meters
               
              Paul,
              I had that problem before too!!
              What kind of tuner do you have?
              Do you have ferrite rings on all leads to your computer?
              I changed out my old tuner , a Kenwood tapped coil, AT180 with a Palstar AT4k, I believe it cured it for me...
              Leo
              kf7oni
              Whitefish, Mt.
              p.s. thanks for the post as I was wondering why I couldn't find you that day. 

              From: Paul Harris <kb2vec@...>
              To: "V4Protocol@yahoogroups.com" <V4Protocol@yahoogroups.com>
              Sent: Monday, December 24, 2012 7:26 PM
              Subject: [V4Protocol] 20 and 40 meters
               
              Heard WB6JFH,N4AY,KF7ONI on 20 meters 22:37 utc.
              Heard N4AY on 40,  Trouble is they couldnt hear me, I ran  kit up to 50 watts and had RF freeze computer.
              Paul KB2VEC.

            Your message has been successfully submitted and would be delivered to recipients shortly.