Loading ...
Sorry, an error occurred while loading the content.

n6kzb back on 28.123

Expand Messages
  • Mike
    back on 28.123
    Message 1 of 22 , Oct 16, 2012
    • 0 Attachment
      back on 28.123

      --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@...> wrote:
      >
      > ok, will watch for sigs, and send a cq out etc... so far nothing
      >
      > From: Fred
      > Sent: Tuesday, October 16, 2012 10:41 AM
      > To: V4Protocol@yahoogroups.com
      > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
      >
      >
      >
      > this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
      > I am in S.TX
      > Fred
      > ke5htb
      >
      >
      >
      > On 10/16/2012 12:28 PM, Mike wrote:
      >
      >
      > Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.
      >
      > Mike
      >
      > --- In mailto:V4Protocol%40yahoogroups.com, "WD9DUI" mailto:wd9dui@ wrote:
      > >
      > > see a sig, but just not enough to decode....
      > > may try later today?
      > > going back to 10M band seems to be open to Europe & South Americas
      > > 73
      > > Gary
      > >
      > > From: Mike
      > > Sent: Tuesday, October 16, 2012 10:25 AM
      > > To: mailto:V4Protocol%40yahoogroups.com
      > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
      > >
      > > on 14.073 again see V4 sig signals, squelch at 3, but no lock
      > >
      > > mike
      > >
      > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
      > > >
      > > > OK
      > > > ON2AD Pat
      > > >
      > > > From: WD9DUI
      > > > Sent: Tuesday, October 16, 2012 7:19 PM
      > > > To: mailto:V4Protocol%40yahoogroups.com
      > > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
      > > >
      > > >
      > > >
      > > > will qsy to 20M see if I see anything...
      > > > Gary
      > > >
      > > > From: Mike
      > > > Sent: Tuesday, October 16, 2012 10:15 AM
      > > > To: mailto:V4Protocol%40yahoogroups.com
      > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
      > > >
      > > >
      > > > I can hear weak V4 signals,.
      > > >
      > > > Perhaps suggest another band and freq?
      > > >
      > > > Mike
      > > >
      > > > --- In mailto:V4Protocol%40yahoogroups.com, "Mike" <burton@> wrote:
      > > > >
      > > > >
      > > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
      > > > >
      > > > > Mike
      > > > >
      > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
      > > > > >
      > > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
      > > > > >
      > > > > > 73 de Pat
      > > > > >
      > > > > > From: WD9DUI
      > > > > > Sent: Tuesday, October 16, 2012 7:05 PM
      > > > > > To: mailto:V4Protocol%40yahoogroups.com
      > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
      > > > > >
      > > > > >
      > > > > >
      > > > > > also looking for sigs...
      > > > > > Gary WD9DUI
      > > > > >
      > > > > > From: Pat
      > > > > > Sent: Tuesday, October 16, 2012 9:59 AM
      > > > > > To: mailto:V4Protocol%40yahoogroups.com
      > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
      > > > > >
      > > > > >
      > > > > >
      > > > > >
      > > > > > OK I'm QRV, maybe its work
      > > > > >
      > > > > > 73 de Pat ON2AD
      > > > > >
      > > > > > From: Mike
      > > > > > Sent: Tuesday, October 16, 2012 6:55 PM
      > > > > > To: mailto:V4Protocol%40yahoogroups.com
      > > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
      > > > > >
      > > > > >
      > > > > > V4 chat time !!
      > > > > >
      > > > >
      > > >
      > > >
      > > >
      > > >
      > > > ------------------------------------
      > > >
      > > > Yahoo! Groups Links
      > > >
      > >
      > >
      > >
      > >
      > > ------------------------------------
      > >
      > > Yahoo! Groups Links
      > >
      >
      >
      >
      >
      >
      > --
      > Fred Rugar
      > KE5HTB
      > ARES Bee County TX
      > Races Bee County tx
      > Skywarn Member
      >
    • Mike
      Well it works ve6egn connected and we had a short qso in ARQ Mike
      Message 2 of 22 , Oct 16, 2012
      • 0 Attachment
        Well it works ve6egn connected and we had a short qso in ARQ

        Mike
        --- In V4Protocol@yahoogroups.com, "Mike" <burton@...> wrote:
        >
        > back on 28.123
        >
        > --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@> wrote:
        > >
        > > ok, will watch for sigs, and send a cq out etc... so far nothing
        > >
        > > From: Fred
        > > Sent: Tuesday, October 16, 2012 10:41 AM
        > > To: V4Protocol@yahoogroups.com
        > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
        > >
        > >
        > >
        > > this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
        > > I am in S.TX
        > > Fred
        > > ke5htb
        > >
        > >
        > >
        > > On 10/16/2012 12:28 PM, Mike wrote:
        > >
        > >
        > > Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.
        > >
        > > Mike
        > >
        > > --- In mailto:V4Protocol%40yahoogroups.com, "WD9DUI" mailto:wd9dui@ wrote:
        > > >
        > > > see a sig, but just not enough to decode....
        > > > may try later today?
        > > > going back to 10M band seems to be open to Europe & South Americas
        > > > 73
        > > > Gary
        > > >
        > > > From: Mike
        > > > Sent: Tuesday, October 16, 2012 10:25 AM
        > > > To: mailto:V4Protocol%40yahoogroups.com
        > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
        > > >
        > > > on 14.073 again see V4 sig signals, squelch at 3, but no lock
        > > >
        > > > mike
        > > >
        > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
        > > > >
        > > > > OK
        > > > > ON2AD Pat
        > > > >
        > > > > From: WD9DUI
        > > > > Sent: Tuesday, October 16, 2012 7:19 PM
        > > > > To: mailto:V4Protocol%40yahoogroups.com
        > > > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
        > > > >
        > > > >
        > > > >
        > > > > will qsy to 20M see if I see anything...
        > > > > Gary
        > > > >
        > > > > From: Mike
        > > > > Sent: Tuesday, October 16, 2012 10:15 AM
        > > > > To: mailto:V4Protocol%40yahoogroups.com
        > > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
        > > > >
        > > > >
        > > > > I can hear weak V4 signals,.
        > > > >
        > > > > Perhaps suggest another band and freq?
        > > > >
        > > > > Mike
        > > > >
        > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Mike" <burton@> wrote:
        > > > > >
        > > > > >
        > > > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
        > > > > >
        > > > > > Mike
        > > > > >
        > > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
        > > > > > >
        > > > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
        > > > > > >
        > > > > > > 73 de Pat
        > > > > > >
        > > > > > > From: WD9DUI
        > > > > > > Sent: Tuesday, October 16, 2012 7:05 PM
        > > > > > > To: mailto:V4Protocol%40yahoogroups.com
        > > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
        > > > > > >
        > > > > > >
        > > > > > >
        > > > > > > also looking for sigs...
        > > > > > > Gary WD9DUI
        > > > > > >
        > > > > > > From: Pat
        > > > > > > Sent: Tuesday, October 16, 2012 9:59 AM
        > > > > > > To: mailto:V4Protocol%40yahoogroups.com
        > > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
        > > > > > >
        > > > > > >
        > > > > > >
        > > > > > >
        > > > > > > OK I'm QRV, maybe its work
        > > > > > >
        > > > > > > 73 de Pat ON2AD
        > > > > > >
        > > > > > > From: Mike
        > > > > > > Sent: Tuesday, October 16, 2012 6:55 PM
        > > > > > > To: mailto:V4Protocol%40yahoogroups.com
        > > > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
        > > > > > >
        > > > > > >
        > > > > > > V4 chat time !!
        > > > > > >
        > > > > >
        > > > >
        > > > >
        > > > >
        > > > >
        > > > > ------------------------------------
        > > > >
        > > > > Yahoo! Groups Links
        > > > >
        > > >
        > > >
        > > >
        > > >
        > > > ------------------------------------
        > > >
        > > > Yahoo! Groups Links
        > > >
        > >
        > >
        > >
        > >
        > >
        > > --
        > > Fred Rugar
        > > KE5HTB
        > > ARES Bee County TX
        > > Races Bee County tx
        > > Skywarn Member
        > >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.