Loading ...
Sorry, an error occurred while loading the content.

Re: [V4Protocol] Re: Now on 28.123 dial n6kzb

Expand Messages
  • Fred
    this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and
    Message 1 of 22 , Oct 16, 2012
    • 0 Attachment
      this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
      I am in S.TX
      Fred
      ke5htb


      On 10/16/2012 12:28 PM, Mike wrote:
       

      Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.

      Mike

      --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@...> wrote:
      >
      > see a sig, but just not enough to decode....
      > may try later today?
      > going back to 10M band seems to be open to Europe & South Americas
      > 73
      > Gary
      >
      > From: Mike
      > Sent: Tuesday, October 16, 2012 10:25 AM
      > To: V4Protocol@yahoogroups.com
      > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
      >
      > on 14.073 again see V4 sig signals, squelch at 3, but no lock
      >
      > mike
      >
      > --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
      > >
      > > OK
      > > ON2AD Pat
      > >
      > > From: WD9DUI
      > > Sent: Tuesday, October 16, 2012 7:19 PM
      > > To: V4Protocol@yahoogroups.com
      > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
      > >
      > >
      > >
      > > will qsy to 20M see if I see anything...
      > > Gary
      > >
      > > From: Mike
      > > Sent: Tuesday, October 16, 2012 10:15 AM
      > > To: V4Protocol@yahoogroups.com
      > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
      > >
      > >
      > > I can hear weak V4 signals,.
      > >
      > > Perhaps suggest another band and freq?
      > >
      > > Mike
      > >
      > > --- In V4Protocol@yahoogroups.com, "Mike" <burton@> wrote:
      > > >
      > > >
      > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
      > > >
      > > > Mike
      > > >
      > > > --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
      > > > >
      > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
      > > > >
      > > > > 73 de Pat
      > > > >
      > > > > From: WD9DUI
      > > > > Sent: Tuesday, October 16, 2012 7:05 PM
      > > > > To: V4Protocol@yahoogroups.com
      > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
      > > > >
      > > > >
      > > > >
      > > > > also looking for sigs...
      > > > > Gary WD9DUI
      > > > >
      > > > > From: Pat
      > > > > Sent: Tuesday, October 16, 2012 9:59 AM
      > > > > To: V4Protocol@yahoogroups.com
      > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
      > > > >
      > > > >
      > > > >
      > > > >
      > > > > OK I'm QRV, maybe its work
      > > > >
      > > > > 73 de Pat ON2AD
      > > > >
      > > > > From: Mike
      > > > > Sent: Tuesday, October 16, 2012 6:55 PM
      > > > > To: V4Protocol@yahoogroups.com
      > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
      > > > >
      > > > >
      > > > > V4 chat time !!
      > > > >
      > > >
      > >
      > >
      > >
      > >
      > > ------------------------------------
      > >
      > > Yahoo! Groups Links
      > >
      >
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >


      -- 
      Fred Rugar
      KE5HTB
      ARES Bee County TX
      Races Bee County tx
      Skywarn Member
      
    • WD9DUI
      ok, will watch for sigs, and send a cq out etc... so far nothing From: Fred Sent: Tuesday, October 16, 2012 10:41 AM To: V4Protocol@yahoogroups.com Subject:
      Message 2 of 22 , Oct 16, 2012
      • 0 Attachment
        ok, will watch for sigs, and send a cq out  etc... so far nothing
         
        From: Fred
        Sent: Tuesday, October 16, 2012 10:41 AM
        Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
         


        this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
        I am in S.TX
        Fred
        ke5htb


        On 10/16/2012 12:28 PM, Mike wrote:
         

        Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.

        Mike

        --- In mailto:V4Protocol%40yahoogroups.com, "WD9DUI" mailto:wd9dui@... wrote:
        >
        > see a sig, but just not enough to decode....
        > may try later today?
        > going back to 10M band seems to be open to Europe & South Americas
        > 73
        > Gary
        >
        > From: Mike
        > Sent: Tuesday, October 16, 2012 10:25 AM
        > To: mailto:V4Protocol%40yahoogroups.com
        > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
        >
        > on 14.073 again see V4 sig signals, squelch at 3, but no lock
        >
        > mike
        >
        > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
        > >
        > > OK
        > > ON2AD Pat
        > >
        > > From: WD9DUI
        > > Sent: Tuesday, October 16, 2012 7:19 PM
        > > To: mailto:V4Protocol%40yahoogroups.com
        > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
        > >
        > >
        > >
        > > will qsy to 20M see if I see anything...
        > > Gary
        > >
        > > From: Mike
        > > Sent: Tuesday, October 16, 2012 10:15 AM
        > > To: mailto:V4Protocol%40yahoogroups.com
        > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
        > >
        > >
        > > I can hear weak V4 signals,.
        > >
        > > Perhaps suggest another band and freq?
        > >
        > > Mike
        > >
        > > --- In mailto:V4Protocol%40yahoogroups.com, "Mike" <burton@> wrote:
        > > >
        > > >
        > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
        > > >
        > > > Mike
        > > >
        > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
        > > > >
        > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
        > > > >
        > > > > 73 de Pat
        > > > >
        > > > > From: WD9DUI
        > > > > Sent: Tuesday, October 16, 2012 7:05 PM
        > > > > To: mailto:V4Protocol%40yahoogroups.com
        > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
        > > > >
        > > > >
        > > > >
        > > > > also looking for sigs...
        > > > > Gary WD9DUI
        > > > >
        > > > > From: Pat
        > > > > Sent: Tuesday, October 16, 2012 9:59 AM
        > > > > To: mailto:V4Protocol%40yahoogroups.com
        > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
        > > > >
        > > > >
        > > > >
        > > > >
        > > > > OK I'm QRV, maybe its work
        > > > >
        > > > > 73 de Pat ON2AD
        > > > >
        > > > > From: Mike
        > > > > Sent: Tuesday, October 16, 2012 6:55 PM
        > > > > To: mailto:V4Protocol%40yahoogroups.com
        > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
        > > > >
        > > > >
        > > > > V4 chat time !!
        > > > >
        > > >
        > >
        > >
        > >
        > >
        > > ------------------------------------
        > >
        > > Yahoo! Groups Links
        > >
        >
        >
        >
        >
        > ------------------------------------
        >
        > Yahoo! Groups Links
        >


        -- 
        Fred Rugar
        KE5HTB
        ARES Bee County TX
        Races Bee County tx
        Skywarn Member
        
      • Mike
        back on 28.123
        Message 3 of 22 , Oct 16, 2012
        • 0 Attachment
          back on 28.123

          --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@...> wrote:
          >
          > ok, will watch for sigs, and send a cq out etc... so far nothing
          >
          > From: Fred
          > Sent: Tuesday, October 16, 2012 10:41 AM
          > To: V4Protocol@yahoogroups.com
          > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
          >
          >
          >
          > this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
          > I am in S.TX
          > Fred
          > ke5htb
          >
          >
          >
          > On 10/16/2012 12:28 PM, Mike wrote:
          >
          >
          > Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.
          >
          > Mike
          >
          > --- In mailto:V4Protocol%40yahoogroups.com, "WD9DUI" mailto:wd9dui@ wrote:
          > >
          > > see a sig, but just not enough to decode....
          > > may try later today?
          > > going back to 10M band seems to be open to Europe & South Americas
          > > 73
          > > Gary
          > >
          > > From: Mike
          > > Sent: Tuesday, October 16, 2012 10:25 AM
          > > To: mailto:V4Protocol%40yahoogroups.com
          > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
          > >
          > > on 14.073 again see V4 sig signals, squelch at 3, but no lock
          > >
          > > mike
          > >
          > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
          > > >
          > > > OK
          > > > ON2AD Pat
          > > >
          > > > From: WD9DUI
          > > > Sent: Tuesday, October 16, 2012 7:19 PM
          > > > To: mailto:V4Protocol%40yahoogroups.com
          > > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
          > > >
          > > >
          > > >
          > > > will qsy to 20M see if I see anything...
          > > > Gary
          > > >
          > > > From: Mike
          > > > Sent: Tuesday, October 16, 2012 10:15 AM
          > > > To: mailto:V4Protocol%40yahoogroups.com
          > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
          > > >
          > > >
          > > > I can hear weak V4 signals,.
          > > >
          > > > Perhaps suggest another band and freq?
          > > >
          > > > Mike
          > > >
          > > > --- In mailto:V4Protocol%40yahoogroups.com, "Mike" <burton@> wrote:
          > > > >
          > > > >
          > > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
          > > > >
          > > > > Mike
          > > > >
          > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
          > > > > >
          > > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
          > > > > >
          > > > > > 73 de Pat
          > > > > >
          > > > > > From: WD9DUI
          > > > > > Sent: Tuesday, October 16, 2012 7:05 PM
          > > > > > To: mailto:V4Protocol%40yahoogroups.com
          > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
          > > > > >
          > > > > >
          > > > > >
          > > > > > also looking for sigs...
          > > > > > Gary WD9DUI
          > > > > >
          > > > > > From: Pat
          > > > > > Sent: Tuesday, October 16, 2012 9:59 AM
          > > > > > To: mailto:V4Protocol%40yahoogroups.com
          > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
          > > > > >
          > > > > >
          > > > > >
          > > > > >
          > > > > > OK I'm QRV, maybe its work
          > > > > >
          > > > > > 73 de Pat ON2AD
          > > > > >
          > > > > > From: Mike
          > > > > > Sent: Tuesday, October 16, 2012 6:55 PM
          > > > > > To: mailto:V4Protocol%40yahoogroups.com
          > > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
          > > > > >
          > > > > >
          > > > > > V4 chat time !!
          > > > > >
          > > > >
          > > >
          > > >
          > > >
          > > >
          > > > ------------------------------------
          > > >
          > > > Yahoo! Groups Links
          > > >
          > >
          > >
          > >
          > >
          > > ------------------------------------
          > >
          > > Yahoo! Groups Links
          > >
          >
          >
          >
          >
          >
          > --
          > Fred Rugar
          > KE5HTB
          > ARES Bee County TX
          > Races Bee County tx
          > Skywarn Member
          >
        • Mike
          Well it works ve6egn connected and we had a short qso in ARQ Mike
          Message 4 of 22 , Oct 16, 2012
          • 0 Attachment
            Well it works ve6egn connected and we had a short qso in ARQ

            Mike
            --- In V4Protocol@yahoogroups.com, "Mike" <burton@...> wrote:
            >
            > back on 28.123
            >
            > --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@> wrote:
            > >
            > > ok, will watch for sigs, and send a cq out etc... so far nothing
            > >
            > > From: Fred
            > > Sent: Tuesday, October 16, 2012 10:41 AM
            > > To: V4Protocol@yahoogroups.com
            > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
            > >
            > >
            > >
            > > this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
            > > I am in S.TX
            > > Fred
            > > ke5htb
            > >
            > >
            > >
            > > On 10/16/2012 12:28 PM, Mike wrote:
            > >
            > >
            > > Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.
            > >
            > > Mike
            > >
            > > --- In mailto:V4Protocol%40yahoogroups.com, "WD9DUI" mailto:wd9dui@ wrote:
            > > >
            > > > see a sig, but just not enough to decode....
            > > > may try later today?
            > > > going back to 10M band seems to be open to Europe & South Americas
            > > > 73
            > > > Gary
            > > >
            > > > From: Mike
            > > > Sent: Tuesday, October 16, 2012 10:25 AM
            > > > To: mailto:V4Protocol%40yahoogroups.com
            > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
            > > >
            > > > on 14.073 again see V4 sig signals, squelch at 3, but no lock
            > > >
            > > > mike
            > > >
            > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
            > > > >
            > > > > OK
            > > > > ON2AD Pat
            > > > >
            > > > > From: WD9DUI
            > > > > Sent: Tuesday, October 16, 2012 7:19 PM
            > > > > To: mailto:V4Protocol%40yahoogroups.com
            > > > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
            > > > >
            > > > >
            > > > >
            > > > > will qsy to 20M see if I see anything...
            > > > > Gary
            > > > >
            > > > > From: Mike
            > > > > Sent: Tuesday, October 16, 2012 10:15 AM
            > > > > To: mailto:V4Protocol%40yahoogroups.com
            > > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
            > > > >
            > > > >
            > > > > I can hear weak V4 signals,.
            > > > >
            > > > > Perhaps suggest another band and freq?
            > > > >
            > > > > Mike
            > > > >
            > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Mike" <burton@> wrote:
            > > > > >
            > > > > >
            > > > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
            > > > > >
            > > > > > Mike
            > > > > >
            > > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
            > > > > > >
            > > > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
            > > > > > >
            > > > > > > 73 de Pat
            > > > > > >
            > > > > > > From: WD9DUI
            > > > > > > Sent: Tuesday, October 16, 2012 7:05 PM
            > > > > > > To: mailto:V4Protocol%40yahoogroups.com
            > > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
            > > > > > >
            > > > > > >
            > > > > > >
            > > > > > > also looking for sigs...
            > > > > > > Gary WD9DUI
            > > > > > >
            > > > > > > From: Pat
            > > > > > > Sent: Tuesday, October 16, 2012 9:59 AM
            > > > > > > To: mailto:V4Protocol%40yahoogroups.com
            > > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
            > > > > > >
            > > > > > >
            > > > > > >
            > > > > > >
            > > > > > > OK I'm QRV, maybe its work
            > > > > > >
            > > > > > > 73 de Pat ON2AD
            > > > > > >
            > > > > > > From: Mike
            > > > > > > Sent: Tuesday, October 16, 2012 6:55 PM
            > > > > > > To: mailto:V4Protocol%40yahoogroups.com
            > > > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
            > > > > > >
            > > > > > >
            > > > > > > V4 chat time !!
            > > > > > >
            > > > > >
            > > > >
            > > > >
            > > > >
            > > > >
            > > > > ------------------------------------
            > > > >
            > > > > Yahoo! Groups Links
            > > > >
            > > >
            > > >
            > > >
            > > >
            > > > ------------------------------------
            > > >
            > > > Yahoo! Groups Links
            > > >
            > >
            > >
            > >
            > >
            > >
            > > --
            > > Fred Rugar
            > > KE5HTB
            > > ARES Bee County TX
            > > Races Bee County tx
            > > Skywarn Member
            > >
            >
          Your message has been successfully submitted and would be delivered to recipients shortly.