Loading ...
Sorry, an error occurred while loading the content.
 

Re: [V4Protocol] Re: Now on 28.123 dial n6kzb

Expand Messages
  • Pat
    OK thanks for trying Gary & Mike. I use IC-703 with only 10 W on a GPA30 Aant.. Bye bye es 73 de Pat ON2AD From: WD9DUI Sent: Tuesday, October 16, 2012 7:27 PM
    Message 1 of 22 , Oct 16, 2012
      OK thanks for trying Gary & Mike.
      I use IC-703 with only 10 W on a GPA30 Aant..
       
      Bye bye es 73 de Pat ON2AD
       
      From: WD9DUI
      Sent: Tuesday, October 16, 2012 7:27 PM
      Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
       
       

      see a sig, but just not enough to decode....
      may try later today?
      going back to 10M band seems to be open to Europe & South Americas
      73
      Gary
       
      From: Mike
      Sent: Tuesday, October 16, 2012 10:25 AM
      Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
       
      on 14.073 again see V4 sig signals, squelch at 3, but no lock

      mike

      --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@...> wrote:
      >
      > OK
      > ON2AD Pat
      >
      >
      From: WD9DUI
      > Sent: Tuesday, October 16, 2012 7:19 PM
      > To:
      V4Protocol@yahoogroups.com
      > Subject: Re: [V4Protocol] Re: Now on 28.123
      dial n6kzb
      >
      >  
      >
      > will qsy to 20M see if
      I see anything...
      > Gary
      >
      > From: Mike
      > Sent:
      Tuesday, October 16, 2012 10:15 AM
      > To: V4Protocol@yahoogroups.com
      > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
      >
      >
      > I can hear weak V4 signals,.
      >
      > Perhaps suggest another
      band and freq?
      >
      > Mike
      >
      > --- In
      V4Protocol@yahoogroups.com, "Mike" <burton@> wrote:
      > >
      > >
      > > Perhaps band needs to build up, I see some V4 but can't lock
      on right now.
      > >
      > > Mike
      > >
      > > --- In
      V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
      > > >
      > > > I don't think its work. I have calling 6 times CQ de
      ON2AD on 28.123, sri
      > > >
      > > > 73 de Pat
      > > >
      > > > From: WD9DUI
      > > > Sent: Tuesday, October
      16, 2012 7:05 PM
      > > > To: V4Protocol@yahoogroups.com
      > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
      > > >
      > > >  
      > > >
      > > > also
      looking for sigs...
      > > > Gary WD9DUI
      > > >
      > > > From: Pat
      > > > Sent: Tuesday, October 16, 2012 9:59
      AM
      > > > To: V4Protocol@yahoogroups.com
      > > > Subject:
      Re: [V4Protocol] Now on 28.123 dial n6kzb
      > > >
      > > >
      > > >
      > > >
      > > > OK I'm QRV, maybe its
      work
      > > >
      > > > 73 de Pat ON2AD
      > > >
      > > > From: Mike
      > > > Sent: Tuesday, October 16, 2012
      6:55 PM
      > > > To: V4Protocol@yahoogroups.com
      > > >
      Subject: [V4Protocol] Now on 28.123 dial n6kzb
      > > >
      > > >  
      > > > V4 chat time !!
      > > >
      > >
      >
      >
      >
      >
      >
      ------------------------------------
      >
      > Yahoo! Groups
      Links
      >




      ------------------------------------

      Yahoo! Groups Links

      <*> To visit your group on the web, go to:
          http://groups.yahoo.com/group/V4Protocol/

      <*> Your email settings:
          Individual Email | Traditional

      <*> To change settings online go to:
          http://groups.yahoo.com/group/V4Protocol/join
          (Yahoo! ID required)

      <*> To change settings via email:
          V4Protocol-digest@yahoogroups.com
          V4Protocol-fullfeatured@yahoogroups.com

      <*> To unsubscribe from this group, send an email to:
          V4Protocol-unsubscribe@yahoogroups.com

      <*> Your use of Yahoo! Groups is subject to:
          http://docs.yahoo.com/info/terms/
    • Fred
      this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and
      Message 2 of 22 , Oct 16, 2012
        this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
        I am in S.TX
        Fred
        ke5htb


        On 10/16/2012 12:28 PM, Mike wrote:
         

        Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.

        Mike

        --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@...> wrote:
        >
        > see a sig, but just not enough to decode....
        > may try later today?
        > going back to 10M band seems to be open to Europe & South Americas
        > 73
        > Gary
        >
        > From: Mike
        > Sent: Tuesday, October 16, 2012 10:25 AM
        > To: V4Protocol@yahoogroups.com
        > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
        >
        > on 14.073 again see V4 sig signals, squelch at 3, but no lock
        >
        > mike
        >
        > --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
        > >
        > > OK
        > > ON2AD Pat
        > >
        > > From: WD9DUI
        > > Sent: Tuesday, October 16, 2012 7:19 PM
        > > To: V4Protocol@yahoogroups.com
        > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
        > >
        > >
        > >
        > > will qsy to 20M see if I see anything...
        > > Gary
        > >
        > > From: Mike
        > > Sent: Tuesday, October 16, 2012 10:15 AM
        > > To: V4Protocol@yahoogroups.com
        > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
        > >
        > >
        > > I can hear weak V4 signals,.
        > >
        > > Perhaps suggest another band and freq?
        > >
        > > Mike
        > >
        > > --- In V4Protocol@yahoogroups.com, "Mike" <burton@> wrote:
        > > >
        > > >
        > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
        > > >
        > > > Mike
        > > >
        > > > --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
        > > > >
        > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
        > > > >
        > > > > 73 de Pat
        > > > >
        > > > > From: WD9DUI
        > > > > Sent: Tuesday, October 16, 2012 7:05 PM
        > > > > To: V4Protocol@yahoogroups.com
        > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
        > > > >
        > > > >
        > > > >
        > > > > also looking for sigs...
        > > > > Gary WD9DUI
        > > > >
        > > > > From: Pat
        > > > > Sent: Tuesday, October 16, 2012 9:59 AM
        > > > > To: V4Protocol@yahoogroups.com
        > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
        > > > >
        > > > >
        > > > >
        > > > >
        > > > > OK I'm QRV, maybe its work
        > > > >
        > > > > 73 de Pat ON2AD
        > > > >
        > > > > From: Mike
        > > > > Sent: Tuesday, October 16, 2012 6:55 PM
        > > > > To: V4Protocol@yahoogroups.com
        > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
        > > > >
        > > > >
        > > > > V4 chat time !!
        > > > >
        > > >
        > >
        > >
        > >
        > >
        > > ------------------------------------
        > >
        > > Yahoo! Groups Links
        > >
        >
        >
        >
        >
        > ------------------------------------
        >
        > Yahoo! Groups Links
        >


        -- 
        Fred Rugar
        KE5HTB
        ARES Bee County TX
        Races Bee County tx
        Skywarn Member
        
      • WD9DUI
        ok, will watch for sigs, and send a cq out etc... so far nothing From: Fred Sent: Tuesday, October 16, 2012 10:41 AM To: V4Protocol@yahoogroups.com Subject:
        Message 3 of 22 , Oct 16, 2012
          ok, will watch for sigs, and send a cq out  etc... so far nothing
           
          From: Fred
          Sent: Tuesday, October 16, 2012 10:41 AM
          Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
           


          this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
          I am in S.TX
          Fred
          ke5htb


          On 10/16/2012 12:28 PM, Mike wrote:
           

          Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.

          Mike

          --- In mailto:V4Protocol%40yahoogroups.com, "WD9DUI" mailto:wd9dui@... wrote:
          >
          > see a sig, but just not enough to decode....
          > may try later today?
          > going back to 10M band seems to be open to Europe & South Americas
          > 73
          > Gary
          >
          > From: Mike
          > Sent: Tuesday, October 16, 2012 10:25 AM
          > To: mailto:V4Protocol%40yahoogroups.com
          > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
          >
          > on 14.073 again see V4 sig signals, squelch at 3, but no lock
          >
          > mike
          >
          > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
          > >
          > > OK
          > > ON2AD Pat
          > >
          > > From: WD9DUI
          > > Sent: Tuesday, October 16, 2012 7:19 PM
          > > To: mailto:V4Protocol%40yahoogroups.com
          > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
          > >
          > >
          > >
          > > will qsy to 20M see if I see anything...
          > > Gary
          > >
          > > From: Mike
          > > Sent: Tuesday, October 16, 2012 10:15 AM
          > > To: mailto:V4Protocol%40yahoogroups.com
          > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
          > >
          > >
          > > I can hear weak V4 signals,.
          > >
          > > Perhaps suggest another band and freq?
          > >
          > > Mike
          > >
          > > --- In mailto:V4Protocol%40yahoogroups.com, "Mike" <burton@> wrote:
          > > >
          > > >
          > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
          > > >
          > > > Mike
          > > >
          > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
          > > > >
          > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
          > > > >
          > > > > 73 de Pat
          > > > >
          > > > > From: WD9DUI
          > > > > Sent: Tuesday, October 16, 2012 7:05 PM
          > > > > To: mailto:V4Protocol%40yahoogroups.com
          > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
          > > > >
          > > > >
          > > > >
          > > > > also looking for sigs...
          > > > > Gary WD9DUI
          > > > >
          > > > > From: Pat
          > > > > Sent: Tuesday, October 16, 2012 9:59 AM
          > > > > To: mailto:V4Protocol%40yahoogroups.com
          > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
          > > > >
          > > > >
          > > > >
          > > > >
          > > > > OK I'm QRV, maybe its work
          > > > >
          > > > > 73 de Pat ON2AD
          > > > >
          > > > > From: Mike
          > > > > Sent: Tuesday, October 16, 2012 6:55 PM
          > > > > To: mailto:V4Protocol%40yahoogroups.com
          > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
          > > > >
          > > > >
          > > > > V4 chat time !!
          > > > >
          > > >
          > >
          > >
          > >
          > >
          > > ------------------------------------
          > >
          > > Yahoo! Groups Links
          > >
          >
          >
          >
          >
          > ------------------------------------
          >
          > Yahoo! Groups Links
          >


          -- 
          Fred Rugar
          KE5HTB
          ARES Bee County TX
          Races Bee County tx
          Skywarn Member
          
        • Mike
          back on 28.123
          Message 4 of 22 , Oct 16, 2012
            back on 28.123

            --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@...> wrote:
            >
            > ok, will watch for sigs, and send a cq out etc... so far nothing
            >
            > From: Fred
            > Sent: Tuesday, October 16, 2012 10:41 AM
            > To: V4Protocol@yahoogroups.com
            > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
            >
            >
            >
            > this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
            > I am in S.TX
            > Fred
            > ke5htb
            >
            >
            >
            > On 10/16/2012 12:28 PM, Mike wrote:
            >
            >
            > Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.
            >
            > Mike
            >
            > --- In mailto:V4Protocol%40yahoogroups.com, "WD9DUI" mailto:wd9dui@ wrote:
            > >
            > > see a sig, but just not enough to decode....
            > > may try later today?
            > > going back to 10M band seems to be open to Europe & South Americas
            > > 73
            > > Gary
            > >
            > > From: Mike
            > > Sent: Tuesday, October 16, 2012 10:25 AM
            > > To: mailto:V4Protocol%40yahoogroups.com
            > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
            > >
            > > on 14.073 again see V4 sig signals, squelch at 3, but no lock
            > >
            > > mike
            > >
            > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
            > > >
            > > > OK
            > > > ON2AD Pat
            > > >
            > > > From: WD9DUI
            > > > Sent: Tuesday, October 16, 2012 7:19 PM
            > > > To: mailto:V4Protocol%40yahoogroups.com
            > > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
            > > >
            > > >
            > > >
            > > > will qsy to 20M see if I see anything...
            > > > Gary
            > > >
            > > > From: Mike
            > > > Sent: Tuesday, October 16, 2012 10:15 AM
            > > > To: mailto:V4Protocol%40yahoogroups.com
            > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
            > > >
            > > >
            > > > I can hear weak V4 signals,.
            > > >
            > > > Perhaps suggest another band and freq?
            > > >
            > > > Mike
            > > >
            > > > --- In mailto:V4Protocol%40yahoogroups.com, "Mike" <burton@> wrote:
            > > > >
            > > > >
            > > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
            > > > >
            > > > > Mike
            > > > >
            > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
            > > > > >
            > > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
            > > > > >
            > > > > > 73 de Pat
            > > > > >
            > > > > > From: WD9DUI
            > > > > > Sent: Tuesday, October 16, 2012 7:05 PM
            > > > > > To: mailto:V4Protocol%40yahoogroups.com
            > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
            > > > > >
            > > > > >
            > > > > >
            > > > > > also looking for sigs...
            > > > > > Gary WD9DUI
            > > > > >
            > > > > > From: Pat
            > > > > > Sent: Tuesday, October 16, 2012 9:59 AM
            > > > > > To: mailto:V4Protocol%40yahoogroups.com
            > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
            > > > > >
            > > > > >
            > > > > >
            > > > > >
            > > > > > OK I'm QRV, maybe its work
            > > > > >
            > > > > > 73 de Pat ON2AD
            > > > > >
            > > > > > From: Mike
            > > > > > Sent: Tuesday, October 16, 2012 6:55 PM
            > > > > > To: mailto:V4Protocol%40yahoogroups.com
            > > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
            > > > > >
            > > > > >
            > > > > > V4 chat time !!
            > > > > >
            > > > >
            > > >
            > > >
            > > >
            > > >
            > > > ------------------------------------
            > > >
            > > > Yahoo! Groups Links
            > > >
            > >
            > >
            > >
            > >
            > > ------------------------------------
            > >
            > > Yahoo! Groups Links
            > >
            >
            >
            >
            >
            >
            > --
            > Fred Rugar
            > KE5HTB
            > ARES Bee County TX
            > Races Bee County tx
            > Skywarn Member
            >
          • Mike
            Well it works ve6egn connected and we had a short qso in ARQ Mike
            Message 5 of 22 , Oct 16, 2012
              Well it works ve6egn connected and we had a short qso in ARQ

              Mike
              --- In V4Protocol@yahoogroups.com, "Mike" <burton@...> wrote:
              >
              > back on 28.123
              >
              > --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@> wrote:
              > >
              > > ok, will watch for sigs, and send a cq out etc... so far nothing
              > >
              > > From: Fred
              > > Sent: Tuesday, October 16, 2012 10:41 AM
              > > To: V4Protocol@yahoogroups.com
              > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
              > >
              > >
              > >
              > > this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
              > > I am in S.TX
              > > Fred
              > > ke5htb
              > >
              > >
              > >
              > > On 10/16/2012 12:28 PM, Mike wrote:
              > >
              > >
              > > Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.
              > >
              > > Mike
              > >
              > > --- In mailto:V4Protocol%40yahoogroups.com, "WD9DUI" mailto:wd9dui@ wrote:
              > > >
              > > > see a sig, but just not enough to decode....
              > > > may try later today?
              > > > going back to 10M band seems to be open to Europe & South Americas
              > > > 73
              > > > Gary
              > > >
              > > > From: Mike
              > > > Sent: Tuesday, October 16, 2012 10:25 AM
              > > > To: mailto:V4Protocol%40yahoogroups.com
              > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
              > > >
              > > > on 14.073 again see V4 sig signals, squelch at 3, but no lock
              > > >
              > > > mike
              > > >
              > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
              > > > >
              > > > > OK
              > > > > ON2AD Pat
              > > > >
              > > > > From: WD9DUI
              > > > > Sent: Tuesday, October 16, 2012 7:19 PM
              > > > > To: mailto:V4Protocol%40yahoogroups.com
              > > > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
              > > > >
              > > > >
              > > > >
              > > > > will qsy to 20M see if I see anything...
              > > > > Gary
              > > > >
              > > > > From: Mike
              > > > > Sent: Tuesday, October 16, 2012 10:15 AM
              > > > > To: mailto:V4Protocol%40yahoogroups.com
              > > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
              > > > >
              > > > >
              > > > > I can hear weak V4 signals,.
              > > > >
              > > > > Perhaps suggest another band and freq?
              > > > >
              > > > > Mike
              > > > >
              > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Mike" <burton@> wrote:
              > > > > >
              > > > > >
              > > > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
              > > > > >
              > > > > > Mike
              > > > > >
              > > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
              > > > > > >
              > > > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
              > > > > > >
              > > > > > > 73 de Pat
              > > > > > >
              > > > > > > From: WD9DUI
              > > > > > > Sent: Tuesday, October 16, 2012 7:05 PM
              > > > > > > To: mailto:V4Protocol%40yahoogroups.com
              > > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
              > > > > > >
              > > > > > >
              > > > > > >
              > > > > > > also looking for sigs...
              > > > > > > Gary WD9DUI
              > > > > > >
              > > > > > > From: Pat
              > > > > > > Sent: Tuesday, October 16, 2012 9:59 AM
              > > > > > > To: mailto:V4Protocol%40yahoogroups.com
              > > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
              > > > > > >
              > > > > > >
              > > > > > >
              > > > > > >
              > > > > > > OK I'm QRV, maybe its work
              > > > > > >
              > > > > > > 73 de Pat ON2AD
              > > > > > >
              > > > > > > From: Mike
              > > > > > > Sent: Tuesday, October 16, 2012 6:55 PM
              > > > > > > To: mailto:V4Protocol%40yahoogroups.com
              > > > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
              > > > > > >
              > > > > > >
              > > > > > > V4 chat time !!
              > > > > > >
              > > > > >
              > > > >
              > > > >
              > > > >
              > > > >
              > > > > ------------------------------------
              > > > >
              > > > > Yahoo! Groups Links
              > > > >
              > > >
              > > >
              > > >
              > > >
              > > > ------------------------------------
              > > >
              > > > Yahoo! Groups Links
              > > >
              > >
              > >
              > >
              > >
              > >
              > > --
              > > Fred Rugar
              > > KE5HTB
              > > ARES Bee County TX
              > > Races Bee County tx
              > > Skywarn Member
              > >
              >
            Your message has been successfully submitted and would be delivered to recipients shortly.