Loading ...
Sorry, an error occurred while loading the content.
 

Re: Now on 28.123 dial n6kzb

Expand Messages
  • Mike
    Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying. Mike
    Message 1 of 22 , Oct 16 10:28 AM
      Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.

      Mike


      --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@...> wrote:
      >
      > see a sig, but just not enough to decode....
      > may try later today?
      > going back to 10M band seems to be open to Europe & South Americas
      > 73
      > Gary
      >
      > From: Mike
      > Sent: Tuesday, October 16, 2012 10:25 AM
      > To: V4Protocol@yahoogroups.com
      > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
      >
      > on 14.073 again see V4 sig signals, squelch at 3, but no lock
      >
      > mike
      >
      > --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
      > >
      > > OK
      > > ON2AD Pat
      > >
      > > From: WD9DUI
      > > Sent: Tuesday, October 16, 2012 7:19 PM
      > > To: V4Protocol@yahoogroups.com
      > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
      > >
      > >
      > >
      > > will qsy to 20M see if I see anything...
      > > Gary
      > >
      > > From: Mike
      > > Sent: Tuesday, October 16, 2012 10:15 AM
      > > To: V4Protocol@yahoogroups.com
      > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
      > >
      > >
      > > I can hear weak V4 signals,.
      > >
      > > Perhaps suggest another band and freq?
      > >
      > > Mike
      > >
      > > --- In V4Protocol@yahoogroups.com, "Mike" <burton@> wrote:
      > > >
      > > >
      > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
      > > >
      > > > Mike
      > > >
      > > > --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
      > > > >
      > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
      > > > >
      > > > > 73 de Pat
      > > > >
      > > > > From: WD9DUI
      > > > > Sent: Tuesday, October 16, 2012 7:05 PM
      > > > > To: V4Protocol@yahoogroups.com
      > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
      > > > >
      > > > >
      > > > >
      > > > > also looking for sigs...
      > > > > Gary WD9DUI
      > > > >
      > > > > From: Pat
      > > > > Sent: Tuesday, October 16, 2012 9:59 AM
      > > > > To: V4Protocol@yahoogroups.com
      > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
      > > > >
      > > > >
      > > > >
      > > > >
      > > > > OK I'm QRV, maybe its work
      > > > >
      > > > > 73 de Pat ON2AD
      > > > >
      > > > > From: Mike
      > > > > Sent: Tuesday, October 16, 2012 6:55 PM
      > > > > To: V4Protocol@yahoogroups.com
      > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
      > > > >
      > > > >
      > > > > V4 chat time !!
      > > > >
      > > >
      > >
      > >
      > >
      > >
      > > ------------------------------------
      > >
      > > Yahoo! Groups Links
      > >
      >
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
    • Pat
      OK thanks for trying Gary & Mike. I use IC-703 with only 10 W on a GPA30 Aant.. Bye bye es 73 de Pat ON2AD From: WD9DUI Sent: Tuesday, October 16, 2012 7:27 PM
      Message 2 of 22 , Oct 16 10:30 AM
        OK thanks for trying Gary & Mike.
        I use IC-703 with only 10 W on a GPA30 Aant..
         
        Bye bye es 73 de Pat ON2AD
         
        From: WD9DUI
        Sent: Tuesday, October 16, 2012 7:27 PM
        Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
         
         

        see a sig, but just not enough to decode....
        may try later today?
        going back to 10M band seems to be open to Europe & South Americas
        73
        Gary
         
        From: Mike
        Sent: Tuesday, October 16, 2012 10:25 AM
        Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
         
        on 14.073 again see V4 sig signals, squelch at 3, but no lock

        mike

        --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@...> wrote:
        >
        > OK
        > ON2AD Pat
        >
        >
        From: WD9DUI
        > Sent: Tuesday, October 16, 2012 7:19 PM
        > To:
        V4Protocol@yahoogroups.com
        > Subject: Re: [V4Protocol] Re: Now on 28.123
        dial n6kzb
        >
        >  
        >
        > will qsy to 20M see if
        I see anything...
        > Gary
        >
        > From: Mike
        > Sent:
        Tuesday, October 16, 2012 10:15 AM
        > To: V4Protocol@yahoogroups.com
        > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
        >
        >
        > I can hear weak V4 signals,.
        >
        > Perhaps suggest another
        band and freq?
        >
        > Mike
        >
        > --- In
        V4Protocol@yahoogroups.com, "Mike" <burton@> wrote:
        > >
        > >
        > > Perhaps band needs to build up, I see some V4 but can't lock
        on right now.
        > >
        > > Mike
        > >
        > > --- In
        V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
        > > >
        > > > I don't think its work. I have calling 6 times CQ de
        ON2AD on 28.123, sri
        > > >
        > > > 73 de Pat
        > > >
        > > > From: WD9DUI
        > > > Sent: Tuesday, October
        16, 2012 7:05 PM
        > > > To: V4Protocol@yahoogroups.com
        > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
        > > >
        > > >  
        > > >
        > > > also
        looking for sigs...
        > > > Gary WD9DUI
        > > >
        > > > From: Pat
        > > > Sent: Tuesday, October 16, 2012 9:59
        AM
        > > > To: V4Protocol@yahoogroups.com
        > > > Subject:
        Re: [V4Protocol] Now on 28.123 dial n6kzb
        > > >
        > > >
        > > >
        > > >
        > > > OK I'm QRV, maybe its
        work
        > > >
        > > > 73 de Pat ON2AD
        > > >
        > > > From: Mike
        > > > Sent: Tuesday, October 16, 2012
        6:55 PM
        > > > To: V4Protocol@yahoogroups.com
        > > >
        Subject: [V4Protocol] Now on 28.123 dial n6kzb
        > > >
        > > >  
        > > > V4 chat time !!
        > > >
        > >
        >
        >
        >
        >
        >
        ------------------------------------
        >
        > Yahoo! Groups
        Links
        >




        ------------------------------------

        Yahoo! Groups Links

        <*> To visit your group on the web, go to:
            http://groups.yahoo.com/group/V4Protocol/

        <*> Your email settings:
            Individual Email | Traditional

        <*> To change settings online go to:
            http://groups.yahoo.com/group/V4Protocol/join
            (Yahoo! ID required)

        <*> To change settings via email:
            V4Protocol-digest@yahoogroups.com
            V4Protocol-fullfeatured@yahoogroups.com

        <*> To unsubscribe from this group, send an email to:
            V4Protocol-unsubscribe@yahoogroups.com

        <*> Your use of Yahoo! Groups is subject to:
            http://docs.yahoo.com/info/terms/
      • Fred
        this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and
        Message 3 of 22 , Oct 16 10:41 AM
          this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
          I am in S.TX
          Fred
          ke5htb


          On 10/16/2012 12:28 PM, Mike wrote:
           

          Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.

          Mike

          --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@...> wrote:
          >
          > see a sig, but just not enough to decode....
          > may try later today?
          > going back to 10M band seems to be open to Europe & South Americas
          > 73
          > Gary
          >
          > From: Mike
          > Sent: Tuesday, October 16, 2012 10:25 AM
          > To: V4Protocol@yahoogroups.com
          > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
          >
          > on 14.073 again see V4 sig signals, squelch at 3, but no lock
          >
          > mike
          >
          > --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
          > >
          > > OK
          > > ON2AD Pat
          > >
          > > From: WD9DUI
          > > Sent: Tuesday, October 16, 2012 7:19 PM
          > > To: V4Protocol@yahoogroups.com
          > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
          > >
          > >
          > >
          > > will qsy to 20M see if I see anything...
          > > Gary
          > >
          > > From: Mike
          > > Sent: Tuesday, October 16, 2012 10:15 AM
          > > To: V4Protocol@yahoogroups.com
          > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
          > >
          > >
          > > I can hear weak V4 signals,.
          > >
          > > Perhaps suggest another band and freq?
          > >
          > > Mike
          > >
          > > --- In V4Protocol@yahoogroups.com, "Mike" <burton@> wrote:
          > > >
          > > >
          > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
          > > >
          > > > Mike
          > > >
          > > > --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
          > > > >
          > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
          > > > >
          > > > > 73 de Pat
          > > > >
          > > > > From: WD9DUI
          > > > > Sent: Tuesday, October 16, 2012 7:05 PM
          > > > > To: V4Protocol@yahoogroups.com
          > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
          > > > >
          > > > >
          > > > >
          > > > > also looking for sigs...
          > > > > Gary WD9DUI
          > > > >
          > > > > From: Pat
          > > > > Sent: Tuesday, October 16, 2012 9:59 AM
          > > > > To: V4Protocol@yahoogroups.com
          > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
          > > > >
          > > > >
          > > > >
          > > > >
          > > > > OK I'm QRV, maybe its work
          > > > >
          > > > > 73 de Pat ON2AD
          > > > >
          > > > > From: Mike
          > > > > Sent: Tuesday, October 16, 2012 6:55 PM
          > > > > To: V4Protocol@yahoogroups.com
          > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
          > > > >
          > > > >
          > > > > V4 chat time !!
          > > > >
          > > >
          > >
          > >
          > >
          > >
          > > ------------------------------------
          > >
          > > Yahoo! Groups Links
          > >
          >
          >
          >
          >
          > ------------------------------------
          >
          > Yahoo! Groups Links
          >


          -- 
          Fred Rugar
          KE5HTB
          ARES Bee County TX
          Races Bee County tx
          Skywarn Member
          
        • WD9DUI
          ok, will watch for sigs, and send a cq out etc... so far nothing From: Fred Sent: Tuesday, October 16, 2012 10:41 AM To: V4Protocol@yahoogroups.com Subject:
          Message 4 of 22 , Oct 16 11:56 AM
            ok, will watch for sigs, and send a cq out  etc... so far nothing
             
            From: Fred
            Sent: Tuesday, October 16, 2012 10:41 AM
            Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
             


            this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
            I am in S.TX
            Fred
            ke5htb


            On 10/16/2012 12:28 PM, Mike wrote:
             

            Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.

            Mike

            --- In mailto:V4Protocol%40yahoogroups.com, "WD9DUI" mailto:wd9dui@... wrote:
            >
            > see a sig, but just not enough to decode....
            > may try later today?
            > going back to 10M band seems to be open to Europe & South Americas
            > 73
            > Gary
            >
            > From: Mike
            > Sent: Tuesday, October 16, 2012 10:25 AM
            > To: mailto:V4Protocol%40yahoogroups.com
            > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
            >
            > on 14.073 again see V4 sig signals, squelch at 3, but no lock
            >
            > mike
            >
            > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
            > >
            > > OK
            > > ON2AD Pat
            > >
            > > From: WD9DUI
            > > Sent: Tuesday, October 16, 2012 7:19 PM
            > > To: mailto:V4Protocol%40yahoogroups.com
            > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
            > >
            > >
            > >
            > > will qsy to 20M see if I see anything...
            > > Gary
            > >
            > > From: Mike
            > > Sent: Tuesday, October 16, 2012 10:15 AM
            > > To: mailto:V4Protocol%40yahoogroups.com
            > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
            > >
            > >
            > > I can hear weak V4 signals,.
            > >
            > > Perhaps suggest another band and freq?
            > >
            > > Mike
            > >
            > > --- In mailto:V4Protocol%40yahoogroups.com, "Mike" <burton@> wrote:
            > > >
            > > >
            > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
            > > >
            > > > Mike
            > > >
            > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
            > > > >
            > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
            > > > >
            > > > > 73 de Pat
            > > > >
            > > > > From: WD9DUI
            > > > > Sent: Tuesday, October 16, 2012 7:05 PM
            > > > > To: mailto:V4Protocol%40yahoogroups.com
            > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
            > > > >
            > > > >
            > > > >
            > > > > also looking for sigs...
            > > > > Gary WD9DUI
            > > > >
            > > > > From: Pat
            > > > > Sent: Tuesday, October 16, 2012 9:59 AM
            > > > > To: mailto:V4Protocol%40yahoogroups.com
            > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
            > > > >
            > > > >
            > > > >
            > > > >
            > > > > OK I'm QRV, maybe its work
            > > > >
            > > > > 73 de Pat ON2AD
            > > > >
            > > > > From: Mike
            > > > > Sent: Tuesday, October 16, 2012 6:55 PM
            > > > > To: mailto:V4Protocol%40yahoogroups.com
            > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
            > > > >
            > > > >
            > > > > V4 chat time !!
            > > > >
            > > >
            > >
            > >
            > >
            > >
            > > ------------------------------------
            > >
            > > Yahoo! Groups Links
            > >
            >
            >
            >
            >
            > ------------------------------------
            >
            > Yahoo! Groups Links
            >


            -- 
            Fred Rugar
            KE5HTB
            ARES Bee County TX
            Races Bee County tx
            Skywarn Member
            
          • Mike
            back on 28.123
            Message 5 of 22 , Oct 16 1:57 PM
              back on 28.123

              --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@...> wrote:
              >
              > ok, will watch for sigs, and send a cq out etc... so far nothing
              >
              > From: Fred
              > Sent: Tuesday, October 16, 2012 10:41 AM
              > To: V4Protocol@yahoogroups.com
              > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
              >
              >
              >
              > this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
              > I am in S.TX
              > Fred
              > ke5htb
              >
              >
              >
              > On 10/16/2012 12:28 PM, Mike wrote:
              >
              >
              > Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.
              >
              > Mike
              >
              > --- In mailto:V4Protocol%40yahoogroups.com, "WD9DUI" mailto:wd9dui@ wrote:
              > >
              > > see a sig, but just not enough to decode....
              > > may try later today?
              > > going back to 10M band seems to be open to Europe & South Americas
              > > 73
              > > Gary
              > >
              > > From: Mike
              > > Sent: Tuesday, October 16, 2012 10:25 AM
              > > To: mailto:V4Protocol%40yahoogroups.com
              > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
              > >
              > > on 14.073 again see V4 sig signals, squelch at 3, but no lock
              > >
              > > mike
              > >
              > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
              > > >
              > > > OK
              > > > ON2AD Pat
              > > >
              > > > From: WD9DUI
              > > > Sent: Tuesday, October 16, 2012 7:19 PM
              > > > To: mailto:V4Protocol%40yahoogroups.com
              > > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
              > > >
              > > >
              > > >
              > > > will qsy to 20M see if I see anything...
              > > > Gary
              > > >
              > > > From: Mike
              > > > Sent: Tuesday, October 16, 2012 10:15 AM
              > > > To: mailto:V4Protocol%40yahoogroups.com
              > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
              > > >
              > > >
              > > > I can hear weak V4 signals,.
              > > >
              > > > Perhaps suggest another band and freq?
              > > >
              > > > Mike
              > > >
              > > > --- In mailto:V4Protocol%40yahoogroups.com, "Mike" <burton@> wrote:
              > > > >
              > > > >
              > > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
              > > > >
              > > > > Mike
              > > > >
              > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
              > > > > >
              > > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
              > > > > >
              > > > > > 73 de Pat
              > > > > >
              > > > > > From: WD9DUI
              > > > > > Sent: Tuesday, October 16, 2012 7:05 PM
              > > > > > To: mailto:V4Protocol%40yahoogroups.com
              > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
              > > > > >
              > > > > >
              > > > > >
              > > > > > also looking for sigs...
              > > > > > Gary WD9DUI
              > > > > >
              > > > > > From: Pat
              > > > > > Sent: Tuesday, October 16, 2012 9:59 AM
              > > > > > To: mailto:V4Protocol%40yahoogroups.com
              > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
              > > > > >
              > > > > >
              > > > > >
              > > > > >
              > > > > > OK I'm QRV, maybe its work
              > > > > >
              > > > > > 73 de Pat ON2AD
              > > > > >
              > > > > > From: Mike
              > > > > > Sent: Tuesday, October 16, 2012 6:55 PM
              > > > > > To: mailto:V4Protocol%40yahoogroups.com
              > > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
              > > > > >
              > > > > >
              > > > > > V4 chat time !!
              > > > > >
              > > > >
              > > >
              > > >
              > > >
              > > >
              > > > ------------------------------------
              > > >
              > > > Yahoo! Groups Links
              > > >
              > >
              > >
              > >
              > >
              > > ------------------------------------
              > >
              > > Yahoo! Groups Links
              > >
              >
              >
              >
              >
              >
              > --
              > Fred Rugar
              > KE5HTB
              > ARES Bee County TX
              > Races Bee County tx
              > Skywarn Member
              >
            • Mike
              Well it works ve6egn connected and we had a short qso in ARQ Mike
              Message 6 of 22 , Oct 16 2:16 PM
                Well it works ve6egn connected and we had a short qso in ARQ

                Mike
                --- In V4Protocol@yahoogroups.com, "Mike" <burton@...> wrote:
                >
                > back on 28.123
                >
                > --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@> wrote:
                > >
                > > ok, will watch for sigs, and send a cq out etc... so far nothing
                > >
                > > From: Fred
                > > Sent: Tuesday, October 16, 2012 10:41 AM
                > > To: V4Protocol@yahoogroups.com
                > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
                > >
                > >
                > >
                > > this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
                > > I am in S.TX
                > > Fred
                > > ke5htb
                > >
                > >
                > >
                > > On 10/16/2012 12:28 PM, Mike wrote:
                > >
                > >
                > > Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.
                > >
                > > Mike
                > >
                > > --- In mailto:V4Protocol%40yahoogroups.com, "WD9DUI" mailto:wd9dui@ wrote:
                > > >
                > > > see a sig, but just not enough to decode....
                > > > may try later today?
                > > > going back to 10M band seems to be open to Europe & South Americas
                > > > 73
                > > > Gary
                > > >
                > > > From: Mike
                > > > Sent: Tuesday, October 16, 2012 10:25 AM
                > > > To: mailto:V4Protocol%40yahoogroups.com
                > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
                > > >
                > > > on 14.073 again see V4 sig signals, squelch at 3, but no lock
                > > >
                > > > mike
                > > >
                > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
                > > > >
                > > > > OK
                > > > > ON2AD Pat
                > > > >
                > > > > From: WD9DUI
                > > > > Sent: Tuesday, October 16, 2012 7:19 PM
                > > > > To: mailto:V4Protocol%40yahoogroups.com
                > > > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
                > > > >
                > > > >
                > > > >
                > > > > will qsy to 20M see if I see anything...
                > > > > Gary
                > > > >
                > > > > From: Mike
                > > > > Sent: Tuesday, October 16, 2012 10:15 AM
                > > > > To: mailto:V4Protocol%40yahoogroups.com
                > > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
                > > > >
                > > > >
                > > > > I can hear weak V4 signals,.
                > > > >
                > > > > Perhaps suggest another band and freq?
                > > > >
                > > > > Mike
                > > > >
                > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Mike" <burton@> wrote:
                > > > > >
                > > > > >
                > > > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
                > > > > >
                > > > > > Mike
                > > > > >
                > > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
                > > > > > >
                > > > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
                > > > > > >
                > > > > > > 73 de Pat
                > > > > > >
                > > > > > > From: WD9DUI
                > > > > > > Sent: Tuesday, October 16, 2012 7:05 PM
                > > > > > > To: mailto:V4Protocol%40yahoogroups.com
                > > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
                > > > > > >
                > > > > > >
                > > > > > >
                > > > > > > also looking for sigs...
                > > > > > > Gary WD9DUI
                > > > > > >
                > > > > > > From: Pat
                > > > > > > Sent: Tuesday, October 16, 2012 9:59 AM
                > > > > > > To: mailto:V4Protocol%40yahoogroups.com
                > > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
                > > > > > >
                > > > > > >
                > > > > > >
                > > > > > >
                > > > > > > OK I'm QRV, maybe its work
                > > > > > >
                > > > > > > 73 de Pat ON2AD
                > > > > > >
                > > > > > > From: Mike
                > > > > > > Sent: Tuesday, October 16, 2012 6:55 PM
                > > > > > > To: mailto:V4Protocol%40yahoogroups.com
                > > > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
                > > > > > >
                > > > > > >
                > > > > > > V4 chat time !!
                > > > > > >
                > > > > >
                > > > >
                > > > >
                > > > >
                > > > >
                > > > > ------------------------------------
                > > > >
                > > > > Yahoo! Groups Links
                > > > >
                > > >
                > > >
                > > >
                > > >
                > > > ------------------------------------
                > > >
                > > > Yahoo! Groups Links
                > > >
                > >
                > >
                > >
                > >
                > >
                > > --
                > > Fred Rugar
                > > KE5HTB
                > > ARES Bee County TX
                > > Races Bee County tx
                > > Skywarn Member
                > >
                >
              Your message has been successfully submitted and would be delivered to recipients shortly.