Loading ...
Sorry, an error occurred while loading the content.

Re: Now on 28.123 dial n6kzb

Expand Messages
  • Mike
    Gary think I heard your CW id? Mike
    Message 1 of 22 , Oct 16, 2012
    • 0 Attachment
      Gary think I heard your CW id?

      Mike

      --- In V4Protocol@yahoogroups.com, "Mike" <burton@...> wrote:
      >
      > on 14.073 again see V4 sig signals, squelch at 3, but no lock
      >
      > mike
      >
      > --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
      > >
      > > OK
      > > ON2AD Pat
      > >
      > > From: WD9DUI
      > > Sent: Tuesday, October 16, 2012 7:19 PM
      > > To: V4Protocol@yahoogroups.com
      > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
      > >
      > >
      > >
      > > will qsy to 20M see if I see anything...
      > > Gary
      > >
      > > From: Mike
      > > Sent: Tuesday, October 16, 2012 10:15 AM
      > > To: V4Protocol@yahoogroups.com
      > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
      > >
      > >
      > > I can hear weak V4 signals,.
      > >
      > > Perhaps suggest another band and freq?
      > >
      > > Mike
      > >
      > > --- In V4Protocol@yahoogroups.com, "Mike" <burton@> wrote:
      > > >
      > > >
      > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
      > > >
      > > > Mike
      > > >
      > > > --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
      > > > >
      > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
      > > > >
      > > > > 73 de Pat
      > > > >
      > > > > From: WD9DUI
      > > > > Sent: Tuesday, October 16, 2012 7:05 PM
      > > > > To: V4Protocol@yahoogroups.com
      > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
      > > > >
      > > > >
      > > > >
      > > > > also looking for sigs...
      > > > > Gary WD9DUI
      > > > >
      > > > > From: Pat
      > > > > Sent: Tuesday, October 16, 2012 9:59 AM
      > > > > To: V4Protocol@yahoogroups.com
      > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
      > > > >
      > > > >
      > > > >
      > > > >
      > > > > OK I'm QRV, maybe its work
      > > > >
      > > > > 73 de Pat ON2AD
      > > > >
      > > > > From: Mike
      > > > > Sent: Tuesday, October 16, 2012 6:55 PM
      > > > > To: V4Protocol@yahoogroups.com
      > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
      > > > >
      > > > >
      > > > > V4 chat time !!
      > > > >
      > > >
      > >
      > >
      > >
      > >
      > > ------------------------------------
      > >
      > > Yahoo! Groups Links
      > >
      >
    • WD9DUI
      see a sig, but just not enough to decode.... may try later today? going back to 10M band seems to be open to Europe & South Americas 73 Gary From: Mike Sent:
      Message 2 of 22 , Oct 16, 2012
      • 0 Attachment
        see a sig, but just not enough to decode....
        may try later today?
        going back to 10M band seems to be open to Europe & South Americas
        73
        Gary
         
        From: Mike
        Sent: Tuesday, October 16, 2012 10:25 AM
        Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
         
        on 14.073 again see V4 sig signals, squelch at 3, but no lock

        mike

        --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@...> wrote:
        >
        > OK
        > ON2AD Pat
        >
        >
        From: WD9DUI
        > Sent: Tuesday, October 16, 2012 7:19 PM
        > To:
        V4Protocol@yahoogroups.com
        > Subject: Re: [V4Protocol] Re: Now on 28.123
        dial n6kzb
        >
        >  
        >
        > will qsy to 20M see if
        I see anything...
        > Gary
        >
        > From: Mike
        > Sent:
        Tuesday, October 16, 2012 10:15 AM
        > To: V4Protocol@yahoogroups.com
        > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
        >
        >
        > I can hear weak V4 signals,.
        >
        > Perhaps suggest another
        band and freq?
        >
        > Mike
        >
        > --- In
        V4Protocol@yahoogroups.com, "Mike" <burton@> wrote:
        > >
        > >
        > > Perhaps band needs to build up, I see some V4 but can't lock
        on right now.
        > >
        > > Mike
        > >
        > > --- In
        V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
        > > >
        > > > I don't think its work. I have calling 6 times CQ de
        ON2AD on 28.123, sri
        > > >
        > > > 73 de Pat
        > > >
        > > > From: WD9DUI
        > > > Sent: Tuesday, October
        16, 2012 7:05 PM
        > > > To: V4Protocol@yahoogroups.com
        > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
        > > >
        > > >  
        > > >
        > > > also
        looking for sigs...
        > > > Gary WD9DUI
        > > >
        > > > From: Pat
        > > > Sent: Tuesday, October 16, 2012 9:59
        AM
        > > > To: V4Protocol@yahoogroups.com
        > > > Subject:
        Re: [V4Protocol] Now on 28.123 dial n6kzb
        > > >
        > > >
        > > >
        > > >
        > > > OK I'm QRV, maybe its
        work
        > > >
        > > > 73 de Pat ON2AD
        > > >
        > > > From: Mike
        > > > Sent: Tuesday, October 16, 2012
        6:55 PM
        > > > To: V4Protocol@yahoogroups.com
        > > >
        Subject: [V4Protocol] Now on 28.123 dial n6kzb
        > > >
        > > >  
        > > > V4 chat time !!
        > > >
        > >
        >
        >
        >
        >
        >
        ------------------------------------
        >
        > Yahoo! Groups
        Links
        >




        ------------------------------------

        Yahoo! Groups Links

        <*> To visit your group on the web, go to:
            http://groups.yahoo.com/group/V4Protocol/

        <*> Your email settings:
            Individual Email | Traditional

        <*> To change settings online go to:
            http://groups.yahoo.com/group/V4Protocol/join
            (Yahoo! ID required)

        <*> To change settings via email:
            V4Protocol-digest@yahoogroups.com
            V4Protocol-fullfeatured@yahoogroups.com

        <*> To unsubscribe from this group, send an email to:
            V4Protocol-unsubscribe@yahoogroups.com

        <*> Your use of Yahoo! Groups is subject to:
            http://docs.yahoo.com/info/terms/
      • Mike
        Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying. Mike
        Message 3 of 22 , Oct 16, 2012
        • 0 Attachment
          Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.

          Mike


          --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@...> wrote:
          >
          > see a sig, but just not enough to decode....
          > may try later today?
          > going back to 10M band seems to be open to Europe & South Americas
          > 73
          > Gary
          >
          > From: Mike
          > Sent: Tuesday, October 16, 2012 10:25 AM
          > To: V4Protocol@yahoogroups.com
          > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
          >
          > on 14.073 again see V4 sig signals, squelch at 3, but no lock
          >
          > mike
          >
          > --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
          > >
          > > OK
          > > ON2AD Pat
          > >
          > > From: WD9DUI
          > > Sent: Tuesday, October 16, 2012 7:19 PM
          > > To: V4Protocol@yahoogroups.com
          > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
          > >
          > >
          > >
          > > will qsy to 20M see if I see anything...
          > > Gary
          > >
          > > From: Mike
          > > Sent: Tuesday, October 16, 2012 10:15 AM
          > > To: V4Protocol@yahoogroups.com
          > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
          > >
          > >
          > > I can hear weak V4 signals,.
          > >
          > > Perhaps suggest another band and freq?
          > >
          > > Mike
          > >
          > > --- In V4Protocol@yahoogroups.com, "Mike" <burton@> wrote:
          > > >
          > > >
          > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
          > > >
          > > > Mike
          > > >
          > > > --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
          > > > >
          > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
          > > > >
          > > > > 73 de Pat
          > > > >
          > > > > From: WD9DUI
          > > > > Sent: Tuesday, October 16, 2012 7:05 PM
          > > > > To: V4Protocol@yahoogroups.com
          > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
          > > > >
          > > > >
          > > > >
          > > > > also looking for sigs...
          > > > > Gary WD9DUI
          > > > >
          > > > > From: Pat
          > > > > Sent: Tuesday, October 16, 2012 9:59 AM
          > > > > To: V4Protocol@yahoogroups.com
          > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
          > > > >
          > > > >
          > > > >
          > > > >
          > > > > OK I'm QRV, maybe its work
          > > > >
          > > > > 73 de Pat ON2AD
          > > > >
          > > > > From: Mike
          > > > > Sent: Tuesday, October 16, 2012 6:55 PM
          > > > > To: V4Protocol@yahoogroups.com
          > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
          > > > >
          > > > >
          > > > > V4 chat time !!
          > > > >
          > > >
          > >
          > >
          > >
          > >
          > > ------------------------------------
          > >
          > > Yahoo! Groups Links
          > >
          >
          >
          >
          >
          > ------------------------------------
          >
          > Yahoo! Groups Links
          >
        • Pat
          OK thanks for trying Gary & Mike. I use IC-703 with only 10 W on a GPA30 Aant.. Bye bye es 73 de Pat ON2AD From: WD9DUI Sent: Tuesday, October 16, 2012 7:27 PM
          Message 4 of 22 , Oct 16, 2012
          • 0 Attachment
            OK thanks for trying Gary & Mike.
            I use IC-703 with only 10 W on a GPA30 Aant..
             
            Bye bye es 73 de Pat ON2AD
             
            From: WD9DUI
            Sent: Tuesday, October 16, 2012 7:27 PM
            Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
             
             

            see a sig, but just not enough to decode....
            may try later today?
            going back to 10M band seems to be open to Europe & South Americas
            73
            Gary
             
            From: Mike
            Sent: Tuesday, October 16, 2012 10:25 AM
            Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
             
            on 14.073 again see V4 sig signals, squelch at 3, but no lock

            mike

            --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@...> wrote:
            >
            > OK
            > ON2AD Pat
            >
            >
            From: WD9DUI
            > Sent: Tuesday, October 16, 2012 7:19 PM
            > To:
            V4Protocol@yahoogroups.com
            > Subject: Re: [V4Protocol] Re: Now on 28.123
            dial n6kzb
            >
            >  
            >
            > will qsy to 20M see if
            I see anything...
            > Gary
            >
            > From: Mike
            > Sent:
            Tuesday, October 16, 2012 10:15 AM
            > To: V4Protocol@yahoogroups.com
            > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
            >
            >
            > I can hear weak V4 signals,.
            >
            > Perhaps suggest another
            band and freq?
            >
            > Mike
            >
            > --- In
            V4Protocol@yahoogroups.com, "Mike" <burton@> wrote:
            > >
            > >
            > > Perhaps band needs to build up, I see some V4 but can't lock
            on right now.
            > >
            > > Mike
            > >
            > > --- In
            V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
            > > >
            > > > I don't think its work. I have calling 6 times CQ de
            ON2AD on 28.123, sri
            > > >
            > > > 73 de Pat
            > > >
            > > > From: WD9DUI
            > > > Sent: Tuesday, October
            16, 2012 7:05 PM
            > > > To: V4Protocol@yahoogroups.com
            > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
            > > >
            > > >  
            > > >
            > > > also
            looking for sigs...
            > > > Gary WD9DUI
            > > >
            > > > From: Pat
            > > > Sent: Tuesday, October 16, 2012 9:59
            AM
            > > > To: V4Protocol@yahoogroups.com
            > > > Subject:
            Re: [V4Protocol] Now on 28.123 dial n6kzb
            > > >
            > > >
            > > >
            > > >
            > > > OK I'm QRV, maybe its
            work
            > > >
            > > > 73 de Pat ON2AD
            > > >
            > > > From: Mike
            > > > Sent: Tuesday, October 16, 2012
            6:55 PM
            > > > To: V4Protocol@yahoogroups.com
            > > >
            Subject: [V4Protocol] Now on 28.123 dial n6kzb
            > > >
            > > >  
            > > > V4 chat time !!
            > > >
            > >
            >
            >
            >
            >
            >
            ------------------------------------
            >
            > Yahoo! Groups
            Links
            >




            ------------------------------------

            Yahoo! Groups Links

            <*> To visit your group on the web, go to:
                http://groups.yahoo.com/group/V4Protocol/

            <*> Your email settings:
                Individual Email | Traditional

            <*> To change settings online go to:
                http://groups.yahoo.com/group/V4Protocol/join
                (Yahoo! ID required)

            <*> To change settings via email:
                V4Protocol-digest@yahoogroups.com
                V4Protocol-fullfeatured@yahoogroups.com

            <*> To unsubscribe from this group, send an email to:
                V4Protocol-unsubscribe@yahoogroups.com

            <*> Your use of Yahoo! Groups is subject to:
                http://docs.yahoo.com/info/terms/
          • Fred
            this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and
            Message 5 of 22 , Oct 16, 2012
            • 0 Attachment
              this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
              I am in S.TX
              Fred
              ke5htb


              On 10/16/2012 12:28 PM, Mike wrote:
               

              Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.

              Mike

              --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@...> wrote:
              >
              > see a sig, but just not enough to decode....
              > may try later today?
              > going back to 10M band seems to be open to Europe & South Americas
              > 73
              > Gary
              >
              > From: Mike
              > Sent: Tuesday, October 16, 2012 10:25 AM
              > To: V4Protocol@yahoogroups.com
              > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
              >
              > on 14.073 again see V4 sig signals, squelch at 3, but no lock
              >
              > mike
              >
              > --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
              > >
              > > OK
              > > ON2AD Pat
              > >
              > > From: WD9DUI
              > > Sent: Tuesday, October 16, 2012 7:19 PM
              > > To: V4Protocol@yahoogroups.com
              > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
              > >
              > >
              > >
              > > will qsy to 20M see if I see anything...
              > > Gary
              > >
              > > From: Mike
              > > Sent: Tuesday, October 16, 2012 10:15 AM
              > > To: V4Protocol@yahoogroups.com
              > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
              > >
              > >
              > > I can hear weak V4 signals,.
              > >
              > > Perhaps suggest another band and freq?
              > >
              > > Mike
              > >
              > > --- In V4Protocol@yahoogroups.com, "Mike" <burton@> wrote:
              > > >
              > > >
              > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
              > > >
              > > > Mike
              > > >
              > > > --- In V4Protocol@yahoogroups.com, "Pat" <on2ad@> wrote:
              > > > >
              > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
              > > > >
              > > > > 73 de Pat
              > > > >
              > > > > From: WD9DUI
              > > > > Sent: Tuesday, October 16, 2012 7:05 PM
              > > > > To: V4Protocol@yahoogroups.com
              > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
              > > > >
              > > > >
              > > > >
              > > > > also looking for sigs...
              > > > > Gary WD9DUI
              > > > >
              > > > > From: Pat
              > > > > Sent: Tuesday, October 16, 2012 9:59 AM
              > > > > To: V4Protocol@yahoogroups.com
              > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
              > > > >
              > > > >
              > > > >
              > > > >
              > > > > OK I'm QRV, maybe its work
              > > > >
              > > > > 73 de Pat ON2AD
              > > > >
              > > > > From: Mike
              > > > > Sent: Tuesday, October 16, 2012 6:55 PM
              > > > > To: V4Protocol@yahoogroups.com
              > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
              > > > >
              > > > >
              > > > > V4 chat time !!
              > > > >
              > > >
              > >
              > >
              > >
              > >
              > > ------------------------------------
              > >
              > > Yahoo! Groups Links
              > >
              >
              >
              >
              >
              > ------------------------------------
              >
              > Yahoo! Groups Links
              >


              -- 
              Fred Rugar
              KE5HTB
              ARES Bee County TX
              Races Bee County tx
              Skywarn Member
              
            • WD9DUI
              ok, will watch for sigs, and send a cq out etc... so far nothing From: Fred Sent: Tuesday, October 16, 2012 10:41 AM To: V4Protocol@yahoogroups.com Subject:
              Message 6 of 22 , Oct 16, 2012
              • 0 Attachment
                ok, will watch for sigs, and send a cq out  etc... so far nothing
                 
                From: Fred
                Sent: Tuesday, October 16, 2012 10:41 AM
                Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
                 


                this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
                I am in S.TX
                Fred
                ke5htb


                On 10/16/2012 12:28 PM, Mike wrote:
                 

                Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.

                Mike

                --- In mailto:V4Protocol%40yahoogroups.com, "WD9DUI" mailto:wd9dui@... wrote:
                >
                > see a sig, but just not enough to decode....
                > may try later today?
                > going back to 10M band seems to be open to Europe & South Americas
                > 73
                > Gary
                >
                > From: Mike
                > Sent: Tuesday, October 16, 2012 10:25 AM
                > To: mailto:V4Protocol%40yahoogroups.com
                > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
                >
                > on 14.073 again see V4 sig signals, squelch at 3, but no lock
                >
                > mike
                >
                > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
                > >
                > > OK
                > > ON2AD Pat
                > >
                > > From: WD9DUI
                > > Sent: Tuesday, October 16, 2012 7:19 PM
                > > To: mailto:V4Protocol%40yahoogroups.com
                > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
                > >
                > >
                > >
                > > will qsy to 20M see if I see anything...
                > > Gary
                > >
                > > From: Mike
                > > Sent: Tuesday, October 16, 2012 10:15 AM
                > > To: mailto:V4Protocol%40yahoogroups.com
                > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
                > >
                > >
                > > I can hear weak V4 signals,.
                > >
                > > Perhaps suggest another band and freq?
                > >
                > > Mike
                > >
                > > --- In mailto:V4Protocol%40yahoogroups.com, "Mike" <burton@> wrote:
                > > >
                > > >
                > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
                > > >
                > > > Mike
                > > >
                > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
                > > > >
                > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
                > > > >
                > > > > 73 de Pat
                > > > >
                > > > > From: WD9DUI
                > > > > Sent: Tuesday, October 16, 2012 7:05 PM
                > > > > To: mailto:V4Protocol%40yahoogroups.com
                > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
                > > > >
                > > > >
                > > > >
                > > > > also looking for sigs...
                > > > > Gary WD9DUI
                > > > >
                > > > > From: Pat
                > > > > Sent: Tuesday, October 16, 2012 9:59 AM
                > > > > To: mailto:V4Protocol%40yahoogroups.com
                > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
                > > > >
                > > > >
                > > > >
                > > > >
                > > > > OK I'm QRV, maybe its work
                > > > >
                > > > > 73 de Pat ON2AD
                > > > >
                > > > > From: Mike
                > > > > Sent: Tuesday, October 16, 2012 6:55 PM
                > > > > To: mailto:V4Protocol%40yahoogroups.com
                > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
                > > > >
                > > > >
                > > > > V4 chat time !!
                > > > >
                > > >
                > >
                > >
                > >
                > >
                > > ------------------------------------
                > >
                > > Yahoo! Groups Links
                > >
                >
                >
                >
                >
                > ------------------------------------
                >
                > Yahoo! Groups Links
                >


                -- 
                Fred Rugar
                KE5HTB
                ARES Bee County TX
                Races Bee County tx
                Skywarn Member
                
              • Mike
                back on 28.123
                Message 7 of 22 , Oct 16, 2012
                • 0 Attachment
                  back on 28.123

                  --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@...> wrote:
                  >
                  > ok, will watch for sigs, and send a cq out etc... so far nothing
                  >
                  > From: Fred
                  > Sent: Tuesday, October 16, 2012 10:41 AM
                  > To: V4Protocol@yahoogroups.com
                  > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
                  >
                  >
                  >
                  > this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
                  > I am in S.TX
                  > Fred
                  > ke5htb
                  >
                  >
                  >
                  > On 10/16/2012 12:28 PM, Mike wrote:
                  >
                  >
                  > Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.
                  >
                  > Mike
                  >
                  > --- In mailto:V4Protocol%40yahoogroups.com, "WD9DUI" mailto:wd9dui@ wrote:
                  > >
                  > > see a sig, but just not enough to decode....
                  > > may try later today?
                  > > going back to 10M band seems to be open to Europe & South Americas
                  > > 73
                  > > Gary
                  > >
                  > > From: Mike
                  > > Sent: Tuesday, October 16, 2012 10:25 AM
                  > > To: mailto:V4Protocol%40yahoogroups.com
                  > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
                  > >
                  > > on 14.073 again see V4 sig signals, squelch at 3, but no lock
                  > >
                  > > mike
                  > >
                  > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
                  > > >
                  > > > OK
                  > > > ON2AD Pat
                  > > >
                  > > > From: WD9DUI
                  > > > Sent: Tuesday, October 16, 2012 7:19 PM
                  > > > To: mailto:V4Protocol%40yahoogroups.com
                  > > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
                  > > >
                  > > >
                  > > >
                  > > > will qsy to 20M see if I see anything...
                  > > > Gary
                  > > >
                  > > > From: Mike
                  > > > Sent: Tuesday, October 16, 2012 10:15 AM
                  > > > To: mailto:V4Protocol%40yahoogroups.com
                  > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
                  > > >
                  > > >
                  > > > I can hear weak V4 signals,.
                  > > >
                  > > > Perhaps suggest another band and freq?
                  > > >
                  > > > Mike
                  > > >
                  > > > --- In mailto:V4Protocol%40yahoogroups.com, "Mike" <burton@> wrote:
                  > > > >
                  > > > >
                  > > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
                  > > > >
                  > > > > Mike
                  > > > >
                  > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
                  > > > > >
                  > > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
                  > > > > >
                  > > > > > 73 de Pat
                  > > > > >
                  > > > > > From: WD9DUI
                  > > > > > Sent: Tuesday, October 16, 2012 7:05 PM
                  > > > > > To: mailto:V4Protocol%40yahoogroups.com
                  > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
                  > > > > >
                  > > > > >
                  > > > > >
                  > > > > > also looking for sigs...
                  > > > > > Gary WD9DUI
                  > > > > >
                  > > > > > From: Pat
                  > > > > > Sent: Tuesday, October 16, 2012 9:59 AM
                  > > > > > To: mailto:V4Protocol%40yahoogroups.com
                  > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
                  > > > > >
                  > > > > >
                  > > > > >
                  > > > > >
                  > > > > > OK I'm QRV, maybe its work
                  > > > > >
                  > > > > > 73 de Pat ON2AD
                  > > > > >
                  > > > > > From: Mike
                  > > > > > Sent: Tuesday, October 16, 2012 6:55 PM
                  > > > > > To: mailto:V4Protocol%40yahoogroups.com
                  > > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
                  > > > > >
                  > > > > >
                  > > > > > V4 chat time !!
                  > > > > >
                  > > > >
                  > > >
                  > > >
                  > > >
                  > > >
                  > > > ------------------------------------
                  > > >
                  > > > Yahoo! Groups Links
                  > > >
                  > >
                  > >
                  > >
                  > >
                  > > ------------------------------------
                  > >
                  > > Yahoo! Groups Links
                  > >
                  >
                  >
                  >
                  >
                  >
                  > --
                  > Fred Rugar
                  > KE5HTB
                  > ARES Bee County TX
                  > Races Bee County tx
                  > Skywarn Member
                  >
                • Mike
                  Well it works ve6egn connected and we had a short qso in ARQ Mike
                  Message 8 of 22 , Oct 16, 2012
                  • 0 Attachment
                    Well it works ve6egn connected and we had a short qso in ARQ

                    Mike
                    --- In V4Protocol@yahoogroups.com, "Mike" <burton@...> wrote:
                    >
                    > back on 28.123
                    >
                    > --- In V4Protocol@yahoogroups.com, "WD9DUI" <wd9dui@> wrote:
                    > >
                    > > ok, will watch for sigs, and send a cq out etc... so far nothing
                    > >
                    > > From: Fred
                    > > Sent: Tuesday, October 16, 2012 10:41 AM
                    > > To: V4Protocol@yahoogroups.com
                    > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
                    > >
                    > >
                    > >
                    > > this is ke5htb I going to try 28.123 for a spell also saw a signal but I havent used this program in ages and wanted to see myself that it still worked and remember how to use it even. last contact and only 1 was in 2011 on 40m even. I will be there for a hour trying and listening.
                    > > I am in S.TX
                    > > Fred
                    > > ke5htb
                    > >
                    > >
                    > >
                    > > On 10/16/2012 12:28 PM, Mike wrote:
                    > >
                    > >
                    > > Ok will go back to 10 meters and sit on 28.123 for a while, thanks to both of you for trying.
                    > >
                    > > Mike
                    > >
                    > > --- In mailto:V4Protocol%40yahoogroups.com, "WD9DUI" mailto:wd9dui@ wrote:
                    > > >
                    > > > see a sig, but just not enough to decode....
                    > > > may try later today?
                    > > > going back to 10M band seems to be open to Europe & South Americas
                    > > > 73
                    > > > Gary
                    > > >
                    > > > From: Mike
                    > > > Sent: Tuesday, October 16, 2012 10:25 AM
                    > > > To: mailto:V4Protocol%40yahoogroups.com
                    > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
                    > > >
                    > > > on 14.073 again see V4 sig signals, squelch at 3, but no lock
                    > > >
                    > > > mike
                    > > >
                    > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
                    > > > >
                    > > > > OK
                    > > > > ON2AD Pat
                    > > > >
                    > > > > From: WD9DUI
                    > > > > Sent: Tuesday, October 16, 2012 7:19 PM
                    > > > > To: mailto:V4Protocol%40yahoogroups.com
                    > > > > Subject: Re: [V4Protocol] Re: Now on 28.123 dial n6kzb
                    > > > >
                    > > > >
                    > > > >
                    > > > > will qsy to 20M see if I see anything...
                    > > > > Gary
                    > > > >
                    > > > > From: Mike
                    > > > > Sent: Tuesday, October 16, 2012 10:15 AM
                    > > > > To: mailto:V4Protocol%40yahoogroups.com
                    > > > > Subject: [V4Protocol] Re: Now on 28.123 dial n6kzb
                    > > > >
                    > > > >
                    > > > > I can hear weak V4 signals,.
                    > > > >
                    > > > > Perhaps suggest another band and freq?
                    > > > >
                    > > > > Mike
                    > > > >
                    > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Mike" <burton@> wrote:
                    > > > > >
                    > > > > >
                    > > > > > Perhaps band needs to build up, I see some V4 but can't lock on right now.
                    > > > > >
                    > > > > > Mike
                    > > > > >
                    > > > > > --- In mailto:V4Protocol%40yahoogroups.com, "Pat" <on2ad@> wrote:
                    > > > > > >
                    > > > > > > I don't think its work. I have calling 6 times CQ de ON2AD on 28.123, sri
                    > > > > > >
                    > > > > > > 73 de Pat
                    > > > > > >
                    > > > > > > From: WD9DUI
                    > > > > > > Sent: Tuesday, October 16, 2012 7:05 PM
                    > > > > > > To: mailto:V4Protocol%40yahoogroups.com
                    > > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
                    > > > > > >
                    > > > > > >
                    > > > > > >
                    > > > > > > also looking for sigs...
                    > > > > > > Gary WD9DUI
                    > > > > > >
                    > > > > > > From: Pat
                    > > > > > > Sent: Tuesday, October 16, 2012 9:59 AM
                    > > > > > > To: mailto:V4Protocol%40yahoogroups.com
                    > > > > > > Subject: Re: [V4Protocol] Now on 28.123 dial n6kzb
                    > > > > > >
                    > > > > > >
                    > > > > > >
                    > > > > > >
                    > > > > > > OK I'm QRV, maybe its work
                    > > > > > >
                    > > > > > > 73 de Pat ON2AD
                    > > > > > >
                    > > > > > > From: Mike
                    > > > > > > Sent: Tuesday, October 16, 2012 6:55 PM
                    > > > > > > To: mailto:V4Protocol%40yahoogroups.com
                    > > > > > > Subject: [V4Protocol] Now on 28.123 dial n6kzb
                    > > > > > >
                    > > > > > >
                    > > > > > > V4 chat time !!
                    > > > > > >
                    > > > > >
                    > > > >
                    > > > >
                    > > > >
                    > > > >
                    > > > > ------------------------------------
                    > > > >
                    > > > > Yahoo! Groups Links
                    > > > >
                    > > >
                    > > >
                    > > >
                    > > >
                    > > > ------------------------------------
                    > > >
                    > > > Yahoo! Groups Links
                    > > >
                    > >
                    > >
                    > >
                    > >
                    > >
                    > > --
                    > > Fred Rugar
                    > > KE5HTB
                    > > ARES Bee County TX
                    > > Races Bee County tx
                    > > Skywarn Member
                    > >
                    >
                  Your message has been successfully submitted and would be delivered to recipients shortly.