Loading ...
Sorry, an error occurred while loading the content.

Re: [V4Protocol] Re: V4 signals decoded in Edinburgh 2011:08:08 18:30/19:30

Expand Messages
  • Mcgaha Edward
    It would help if you put the freq. in on these post.  DB7EM ________________________________ From: Adam Rozanski To:
    Message 1 of 7 , Oct 1, 2011
    • 0 Attachment
      It would help if you put the freq. in on these post.  DB7EM



      From: Adam Rozanski <rozanski@...>
      To: v4protocol@yahoogroups.com
      Sent: Saturday, October 1, 2011 1:00 AM
      Subject: RE: [V4Protocol] Re: V4 signals decoded in Edinburgh 2011:08:08 18:30/19:30

       
      Hi John still trying but still no luck got into France so will ket you one of thes days
      73 Adam ka2uol

       

      To: V4Protocol@yahoogroups.com
      From: jhowell@...
      Date: Sat, 10 Sep 2011 20:01:03 +0000
      Subject: [V4Protocol] Re: V4 signals decoded in Edinburgh 2011:08:08 18:30/19:30

       
      Hi Adam

      Just using a dipole and 50 watts. It was OK for Amtor so when conditions are right it should work.

      John GM4ZQH

      --- In V4Protocol@yahoogroups.com, Adam Rozanski <rozanski@...> wrote:
      >
      >
      > tryed to call you a few times but band not that good today will keep trying now that I have your call will make it some dayAdam ka2uol
      > To: V4Protocol@yahoogroups.com
      > From: jhowell@...
      > Date: Fri, 9 Sep 2011 18:08:10 +0000
      > Subject: [V4Protocol] Re: V4 signals decoded in Edinburgh 2011:08:08 18:30/19:30
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      > Hi Adam
      >
      >
      >
      > Just heard you at 17:59 but you can t hear me. Also heard SV1UY
      >
      > and KB0E earlier
      >
      >
      >
      > John GM4ZQH was not at the rig to see signal strength .
      >
      >
      >
      > --- In V4Protocol@yahoogroups.com, Adam Rozanski <rozanski@> wrote:
      >
      > >
      >
      > >
      >
      > > Thank you John will look for you but you did not gine your call 73 Adam ka2uol
      >
      > > To: V4Protocol@yahoogroups.com
      >
      > > From: jhowell@
      >
      > > Date: Thu, 8 Sep 2011 20:40:49 +0000
      >
      > > Subject: [V4Protocol] V4 signals decoded in Edinburgh 2011:08:08 18:30/19:30
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > >
      >
      > > The following stations CQ signals were clearly decoded in Edinburgh this evening. Unfortunately I was cooking dinner having just set V4 in operation .
      >
      > >
      >
      > >
      >
      > >
      >
      > > W3JAL........KB0E.......KA2UOL......VE3FWF.
      >
      > >
      >
      > >
      >
      > >
      >
      > > I shall try and be on frequency at these times to join in the fun :)
      >
      > >
      >
      > >
      >
      > >
      >
      > > Some ARQ conversations were partially decoded from stations unknown.
      >
      > >
      >




    Your message has been successfully submitted and would be delivered to recipients shortly.