Loading ...
Sorry, an error occurred while loading the content.

Re: [V4Protocol] Re: Transmit

Expand Messages
  • Rick Muething
    The only time the transmit signal can be seen on the waterfall is during the FEC loopback test. That special test runs both the playback and capture devices at
    Message 1 of 4 , Jun 2, 2011
    • 0 Attachment
      The only time the transmit signal can be seen on the waterfall is during the FEC loopback test. That special test runs both the playback and capture devices at the same time since FEC Full duplex is selected.  ARQ mode only operates half duplex.
       
      Rick KN6KB
      ]
       
      From: JGMAGS
      Sent: Wednesday, June 01, 2011 9:05 PM
      Subject: Re: [V4Protocol] Re: Transmit
       
       

      thanks, 73 John
       
      "Many a good argument is ruined by some fool that knows what he is talking about"
      ... Marshall McLuhan...

      From: ham <ve3fwf@...>
      To: V4Protocol@yahoogroups.com
      Sent: Wednesday, June 1, 2011 8:34 PM
      Subject: [V4Protocol] Re: Transmit

       


      You won't see your xmit signal on the waterfall. You should see the XMIT frame window flash.

      73, Bernie

      --- In mailto:V4Protocol%40yahoogroups.com, "jgmags2000" <jgmags2000@...> wrote:
      >
      > Hello. I'm trying to
      operate ARQ but I cannot see my transmit signal on the waterfall. Radio is keyed ok. Tnc shows ok on port 8510. Any help please.
      >
      > 73, de John
      KJ1J
      >



    Your message has been successfully submitted and would be delivered to recipients shortly.