Loading ...
Sorry, an error occurred while loading the content.

3042Re: Flex...delay

Expand Messages
  • palmdalesteve
    Dec 25, 2012
    • 0 Attachment
      Kirk

      Thanks again for the help.

      Steve N6CRR

      --- In V4Protocol@yahoogroups.com, "Kirk" <kirk.harding@...> wrote:
      >
      > OK, glad you got it fixed. Bye the way, please include your name and call.
      >
      >
      >
      > Thanks,
      >
      >
      >
      > Kirk, K6KAR
      >
      >
      >
      > From: V4Protocol@yahoogroups.com [mailto:V4Protocol@yahoogroups.com] On
      > Behalf Of palmdalesteve
      > Sent: Tuesday, December 25, 2012 10:48 AM
      > To: V4Protocol@yahoogroups.com
      > Subject: [V4Protocol] Re: Flex...delay
      >
      >
      >
      >
      >
      > Kirk
      >
      > Thanks, that was it, my latency in VAC was set to something outehr than 0.
      > Set to 0 and fixed my issue.
      >
      > --- In V4Protocol@yahoogroups.com <mailto:V4Protocol%40yahoogroups.com> ,
      > "Kirk" <kirk.harding@> wrote:
      > >
      > > I run V4 using my 5000 and have no problem with delay. First off, within
      > > PWSDR setup, be sure you set latency to 0. Do this in both the General tab
      > > as well as Audio/VAC tab. I run all buffers at 1024 but this is somewhat
      > > dependent upon the type of computer you are using. I'm using an I7 running
      > > Win7 Ultimate. X64. With my setup, I see anywhere from 35ms to 135ms V4
      > > latency. If you continue to have problems send me a direct email and
      > > include your telephone number along with a good time to contact you. I'll
      > > talk you through the setup. Email address is in QRZ.
      > >
      > >
      > >
      > > Merry Christmas,
      > >
      > >
      > >
      > > Kirk, K6KAR
      > >
      > > Niceville, FL
      > >
      > >
      > >
      > >
      > >
      > > From: V4Protocol@yahoogroups.com <mailto:V4Protocol%40yahoogroups.com>
      > [mailto:V4Protocol@yahoogroups.com <mailto:V4Protocol%40yahoogroups.com> ]
      > On
      > > Behalf Of palmdalesteve
      > > Sent: Monday, December 24, 2012 7:34 PM
      > > To: V4Protocol@yahoogroups.com <mailto:V4Protocol%40yahoogroups.com>
      > > Subject: [V4Protocol] Flex...delay
      > >
      > >
      > >
      > >
      > >
      > > All
      > >
      > > I'm seeing about 380ms on delay with my Flex 3000 when calling CQ. Went
      > > through all the stuff in the help files, is there a some sort of magic
      > that
      > > you have to do to the delays down?
      > >
      > > I am running Virtual Serial Port instead of the COM0 stuff as this program
      > > runs native under Windows 64 as a signed program.
      > >
      > > Thanks
      > >
      >
    • Show all 7 messages in this topic