Loading ...
Sorry, an error occurred while loading the content.

Topics List

Re: FSQ106N to Extender Q 1.6x adapter?

(6)
Sure. I was referring to the charts. There is very little information on their website or venders (varies) about the optical length of various adapters. The
Matthew Hughes
6
posts
11:18 PM

Weird artifacts in lower left corner star images...

(3)
Gene: Thank you. I can't imagine anything shifting during such a short exposure, but I am no expert here. The whole imaging train is very solid. The seeing
darklightimagery
3
posts
Oct 20

TOA130S focuser flexure

(4)
Hello Bill, Bob, Thank you very much! I'll try to tighten the screws a bit to see how it behaves. Also there is a plan to replace the heaviest part of the
ivaylo.stoynov
4
posts
Oct 20

Achieving focus FSQ106EDX imaging edition

(22)
My measurements were correct. Using a micrometer, the focuser was exactly 3.2mm closer to the fully racked in position when my DSLR was perfectly focused,
grmillerok1
22
posts
Oct 15

EM-200 doesn't work on 12V, only 24V

(4)
I did have a similar issue using a AC to DC converter that didn't have enough power or amperage. I run my mount off of a 12 volt battery and the problem was
nkleinma@bellsouth.net
4
posts
Oct 12

TSA120 flattener

(9)
Wow...great work! This optics stuff is over my head too but it looks like your Y tilt changes with time and gets less as your altitude increases. I would
Kevin Sipprell
9
posts
Sep 30

TOA-150

(105)
Well it seems that clouds will be around until Saturday UGH... Joe
stargate_nj_joe
105
posts
Sep 13

67-FL flattener and Starlight Xpress H35 camera

(9)
I use the Standard Tak focuser and the FLI Atlas focuser: a great combination! Sent from Yahoo Mail for iPhone On Monday, September 11, 2017, 8:24 am,
Bert Van Den Broek
9
posts
Sep 12

NGC6820 in wide-field

(3)
Thank you, Jose. Leonard On Sun, Sep 10, 2017 at 4:06 PM, Jose Bellas jose@josebellas.com
Leonard Ellul-Mercer
3
posts
Sep 10

Re: tracking speeds, was: Temma PC Hand controller

(3)
Thanks Gene. I can see the utility if the settings were saved but in my case I now know I have the same settings each time I guide. Now that doesn't explain
Sander Pool
3
posts
Sep 8

Small Magellanic Cloud with the FSQ-106ED

(3)
Thanks Joe! I'm glad you liked it! Luiz Duczmal
lduczmal
3
posts
Sep 8

TAK 130 and Focal reducer

(7)
"If it is a narrow band filter then your guider chip will not get enough light to do guiding." It depends upon how well your mount is tracking and the strength
dan kowall
7
posts
Sep 8

Temma PC Hand controller

(4)
Scanned Tak mount manuals should be in the Files section of this group. And there should be a EM-200 manual in there. The HC commands should be in there. Pdf
Woody Schlom
4
posts
Sep 7

FSQ106ED Collimation Issues?

(3)
I see them. I wonder if this is “focuser sag” to one corner. I’m not sure if you could get a tilt/plate adjuster and use CCDInspector to adjust or shim
Rick Kuntz
3
posts
Aug 30

Land, Sea & Sky in Houston

(3)
All: Thank you for your concern. Land Sea & Sky and Takahashi America are generally fine, though some of our staff have been adversely impacted by the
Chysinger
3
posts
Aug 28
View First Topic Go to View Last Topic