Re: [UV-3R] PL2303HX USB to TTL for programming the uv-3r?
- Please use the unsubscribe link at the bottom of any message from the group.
On 9/14/2013 5:06 PM, Jiří Hruška wrote:unsubscribe
The pl2303hx converter module is will do both 3.3 and 5v. I can't find out how to set the data level to one or the other.
--- In firstname.lastname@example.org, <johnla@...> wrote:
If you are putting together a CP2012 board for a programming cable, this Tech link on the Miklor site might help as far as cables and pin outs. I use one and it works great. A link to the Silabs Driver can be found there also. . . http://www.miklor.com/COM/UV_Technical.html
As for the operating voltage, I would think a 33 percent increase from 3.7 to 5.0 volts is a little too much.
Has anyone tried this. I ordered one of the modules off ebay then noticed that other people were using the CP2102 or something like that. Also is 5v too high for the UV-3r?
Thanks for any help.
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3392 / Virus Database: 3222/6659 - Release Date: 09/12/13