Loading ...
Sorry, an error occurred while loading the content.
  • Back
  • About Group

  • Join Group
added in the last 7 days
New MessagesSee All
  • Re: 9912 board

    Jim:   I did not have a spectrum analyzer to look at the spurs.  Check the dds_controller group at Yahoo. Dave - WB6DHW ... Jim:   I did not have a spectrum

    brainerdd 2 days ago
  • Re: 9912 board

    I'm in for one! Larry KB3CUF

    wr3ichgaxgujzxc4xrtrdpsyfntna4dk62d2hiuq 2 days ago
  • Re: 9912 board

    Hi Dave, That sounds great, I've never soldered an E-pad directly that way, but I have seen that done quite a bit for lower volume boards. On your board, did

    jim_amos_n8cah 2 days ago
Fetching Sponsored Content...

Group Description

The UHFSDR 1.75 to 700 MHz transceiver by WB6DHW

Group Information

Group Settings

  • This is a restricted group.
  • Attachments are permitted.
  • Members cannot hide email address.
  • Listed in Yahoo Groups directory.
  • Membership requires approval.
  • Messages are not moderated.
  • All members can post messages.

Message History