Loading ...
Sorry, an error occurred while loading the content.

Re: Fork oil

Expand Messages
  • Henrik
    Thanks a lot for your input guys. MERRY CHRISTMAS! Regards /Henrik ... evenly ... the level is ... the top
    Message 1 of 18 , Dec 1, 2006
    • 0 Attachment
      Thanks a lot for your input guys.

      MERRY CHRISTMAS!
      Regards /Henrik



      --- In TriumphTrophy@yahoogroups.com, "AJ Turner" <aj-turner@...>
      wrote:
      >
      > OK Henrik,
      >
      > According to the manual, you need SAE 10W-20 fork oil.
      >
      > When re-filling the forks:
      >
      > 1) do this WITHOUT the spring in place
      > 2) hold them straight up (vertical) and slowly add oil
      > 3) slide the fork up and down inside the slider as you go to
      evenly
      > distribute the oil
      > 4) with the fork fully lowered into the slider, fill them until
      the level is
      > 133mm from the top edge of the fork
      > 5) now you can replace the spring and close the forks by replacing
      the top
      > bolt
      >
      > Good luck!
      >
      > AJ Turner
      > '96 Merlot BBBB
      >
      >
      > ----- Original Message -----
      > From: "Henrik" <trippletrophy@...>
      >
      >
      > >Thanks for the reply. here is the 5 last digits 76534.
      > >its a -99 triple
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.