Loading ...
Sorry, an error occurred while loading the content.
  • Back
  • About Group

  • Join Group
2 members, 3 messages added in the last 7 days
New MessagesSee All
  • Re: TS-590S Power Cable - GOT IT !!

    ...must be similar and sure glad I asked! The parts I was prying on stay with the radio so if I had kept doing what I was doing, I certainly would have broken

    weightdn 5 days ago
  • Re: TS-590S Power Cable - How To Get It Off ??

    If it's like a '570, push on the top rear of the connector while pulling it out of the connector on the rig. Pushing on the top rear should release the latch

    k4tl 6 days ago
  • TS-590S Power Cable - How To Get It Off ??

    I know, dumb question but... Trying to get the power cord off a friend's TS-590 so I can ship it. I didn't put the cable on so have no prior knowledge of it.

    weightdn 6 days ago
Fetching Sponsored Content...

Group Description

This is a discussion list for Kenwood TS-850, TS-450 and TS-690 users, to discuss tips and tricks, radio survival, mods (EXCEPT out of band, plenty of other sources for this subject please), and getting the most from this really cool rig. keywords: Kenwood, Amateur Radio, TS-850, TS-450, TS-690, Ham Radio

RULES OF THE ROAD: All the usual rules for an all-ages group apply. No spam, etc. Need I say more? Also, attachments (pics, files etc) are not allowed through the group to prevent trojan horses. Share files direct if necessary, or post to the "files" section of the group.

PHOTO NOTE: This is a blown surge absorber, used on the 850 antenna lead, on the small circuit board, rear center of rig under the filter unit cover that is held on with 7 small sheet metal screws. Check yours today. This one got so hot it melted the glass envelope, which is supposed to be cylidrical, and clear in color. Prevented massive damage to the rig however. DE K0ZL

Group Information

Group Settings

  • This is a restricted group.
  • Attachments are not permitted.
  • Members cannot hide email address.
  • Listed in Yahoo Groups directory.
  • Membership requires approval.
  • Messages from new members require approval.
  • All members can post messages.

Message History