Loading ...
Sorry, an error occurred while loading the content.

Re: [SherlineCNC] Re: Digispeed...

Expand Messages
  • Peter Homann
    Hi Jim, An email I sent you on the 29th has been undelivered with the message; ... This is the Postfix program at host webrdr.connect.com.au. I m sorry to have
    Message 1 of 24 , Feb 1, 2006
    • 0 Attachment
      Hi Jim,

      An email I sent you on the 29th has been undelivered with the message;

      -------------------------
      This is the Postfix program at host webrdr.connect.com.au.

      I'm sorry to have to inform you that the message returned
      below could not be delivered to one or more destinations.

      For further assistance, please send mail to <postmaster>

      If you do so, please include this problem report. You can
      delete your own text from the message returned below.

      The Postfix program

      <jim_knighton@...>: connect to mx3.hotmail.com[65.54.244.200]: Connection
      timed out

      ---------------------------

      I sent you an email this morning. Did you receive it?

      Do you have another Enail address I can use?

      I can supply the DigiSpeed plus cable. The cost is 71.00 including postage.

      I presume it is for installation in a Sherline DC motor controller housing?

      Cheers,

      Peter.


      Jim Knighton wrote:
      > Hi Peter...
      >
      > I want to buy a Digispeed controller and also the MiniDin cable. In
      > as much as payment will be via paypal I sent you an email to this
      > effect via the link on your web site. I guess it never went through.
      >
      > Anyway, it's for a small Sherline lathe with PMDX electronics running
      > Mach 3 software. I'm assuming that since others are using Mach 3 the
      > setup is manageable. My thought was to run the cable (minus one end)
      > directly to my PMDX breakout board. I'm not sure how to configure
      > Mach, but I suppose I'll sort it out soon enough.
      >
      > Contact me at jim_knighton@...
      >
      > Regards,
      >
      > Jim
      >
      >
      >
      > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...> wrote:
      >
      >>Hi Jim,
      >>
      >>I'm here. Don't recall seeing an email from you.
      >>
      >>How can I help.
      >>
      >>Cheers,
      >>
      >>
      >>Peter.
      >>
      >>
      >>Jim Knighton wrote:
      >>
      >>>Is there a US source for Peter Homann's Digispeed controller?
      >
      > I've
      >
      >>>tried contacting him (last week) directly via his web site but so
      >
      > far
      >
      >>>there hasn't been a response. Any thoughts?
      >>>
      >>>Regards,
      >>>
      >>>Jim
      >>>
      >>>
      >>>
      >>>
      >>>
      >>>
      >>>
      >>>
      >>>Yahoo! Groups Links
      >>>
      >>>
      >>>
      >>>
      >>>
      >>>
      >>>
      >>
      >>--
      >>------------------------------------------------------------------
      >>Web: www.homanndesigns.com
      >>email: homann@h...
      >>Phone: +61 421 601 665
      >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
      >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
      >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
      >>
      >
      >
      >
      >
      >
      >
      >
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      >
      >
      >

      --
      ------------------------------------------------------------------
      Web: www.homanndesigns.com
      email: homann@...
      Phone: +61 421 601 665
      www.homanndesigns.com/ModIO.html - Modbus Interface Unit
      www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
      www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
    • Jim Knighton
      Peter, I ve sent you several emails now, including one each on the last two days. It appears that you aren t receiving them. I did get one email from you a
      Message 2 of 24 , Feb 1, 2006
      • 0 Attachment
        Peter,

        I've sent you several emails now, including one each on the last two
        days. It appears that you aren't receiving them. I did get one email
        from you a couple of days ago, to which I responded. I don't know
        what is going on... With the messages I've sent you I've never
        recieved an "undelivered" message, so from all I see it looks like
        they are sent and received.


        I changed my ISP a couple of months ago and also updated my profile
        here in Yahoo to reflect that change. Sometimes, however, the old
        email address still pops up. I don't know why or how to fix it.

        Will you please confirm your email address and maybe give me an
        alternative if you have one?

        Until we get the communications working right it seems a bit
        foolhardy to attempt a Paypal transfer although I'm ready and willing
        to do so. I don't want to do a transfer only to have it fall into a
        black hole somewhere. That could cause all sorts of frustration on
        both ends. Please keep in mind that I really want to conclude this
        transaction, however.

        So, my "real" email address is the one I gave you earlier:

        jim_knighton@... (The one message I received from you was sent to
        this address)

        my old and defunct address is:

        jimknighton@... (don't use this one - that account is
        dead. If you have it in your address book, please delete it).

        Here are a couple of "emergency backup" addresses we can try as well:

        jim_knighton@...
        and
        jim_knighton@...

        I'll make a point of checking these frequently until we get things
        sorted out. I've never had this kind of problem before, and I do a
        lot of email correspondence with people all around the world. This is
        just crazy, and I don't have a clue which end the problem is on.

        Thanks for being persistent and contacting me this way. Hopefully, no
        one else is having this problem.

        Anyway, As soon as this posts I'll send you three test messages from
        each of the aforementioned active accounts in hopes that something
        gets through. If I don't hear back from you "soon" I'll post another
        message here to apprise you of that fact. So, here's hoping we can
        sort it out.

        Regards,

        Jim



        --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...> wrote:
        >
        > Hi Jim,
        >
        > An email I sent you on the 29th has been undelivered with the
        message;
        >
        > -------------------------
        > This is the Postfix program at host webrdr.connect.com.au.
        >
        > I'm sorry to have to inform you that the message returned
        > below could not be delivered to one or more destinations.
        >
        > For further assistance, please send mail to <postmaster>
        >
        > If you do so, please include this problem report. You can
        > delete your own text from the message returned below.
        >
        > The Postfix program
        >
        > <jim_knighton@m...>: connect to mx3.hotmail.com[65.54.244.200]:
        Connection
        > timed out
        >
        > ---------------------------
        >
        > I sent you an email this morning. Did you receive it?
        >
        > Do you have another Enail address I can use?
        >
        > I can supply the DigiSpeed plus cable. The cost is 71.00 including
        postage.
        >
        > I presume it is for installation in a Sherline DC motor controller
        housing?
        >
        > Cheers,
        >
        > Peter.
        >
        >
        > Jim Knighton wrote:
        > > Hi Peter...
        > >
        > > I want to buy a Digispeed controller and also the MiniDin cable.
        In
        > > as much as payment will be via paypal I sent you an email to this
        > > effect via the link on your web site. I guess it never went
        through.
        > >
        > > Anyway, it's for a small Sherline lathe with PMDX electronics
        running
        > > Mach 3 software. I'm assuming that since others are using Mach 3
        the
        > > setup is manageable. My thought was to run the cable (minus one
        end)
        > > directly to my PMDX breakout board. I'm not sure how to configure
        > > Mach, but I suppose I'll sort it out soon enough.
        > >
        > > Contact me at jim_knighton@m...
        > >
        > > Regards,
        > >
        > > Jim
        > >
        > >
        > >
        > > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
        wrote:
        > >
        > >>Hi Jim,
        > >>
        > >>I'm here. Don't recall seeing an email from you.
        > >>
        > >>How can I help.
        > >>
        > >>Cheers,
        > >>
        > >>
        > >>Peter.
        > >>
        > >>
        > >>Jim Knighton wrote:
        > >>
        > >>>Is there a US source for Peter Homann's Digispeed controller?
        > >
        > > I've
        > >
        > >>>tried contacting him (last week) directly via his web site but
        so
        > >
        > > far
        > >
        > >>>there hasn't been a response. Any thoughts?
        > >>>
        > >>>Regards,
        > >>>
        > >>>Jim
        > >>>
        > >>>
        > >>>
        > >>>
        > >>>
        > >>>
        > >>>
        > >>>
        > >>>Yahoo! Groups Links
        > >>>
        > >>>
        > >>>
        > >>>
        > >>>
        > >>>
        > >>>
        > >>
        > >>--
        > >>------------------------------------------------------------------
        > >>Web: www.homanndesigns.com
        > >>email: homann@h...
        > >>Phone: +61 421 601 665
        > >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
        > >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
        > >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
        > >>
        > >
        > >
        > >
        > >
        > >
        > >
        > >
        > >
        > > Yahoo! Groups Links
        > >
        > >
        > >
        > >
        > >
        > >
        > >
        >
        > --
        > ------------------------------------------------------------------
        > Web: www.homanndesigns.com
        > email: homann@h...
        > Phone: +61 421 601 665
        > www.homanndesigns.com/ModIO.html - Modbus Interface Unit
        > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
        > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
        >
      • Peter Homann
        Hi Jim, I am receiving your emails. You are not receiving mine?? I just replied to your message from jimknighton@gmail.com hopefully you received my reply.
        Message 3 of 24 , Feb 1, 2006
        • 0 Attachment
          Hi Jim,

          I am receiving your emails. You are not receiving mine??


          I just replied to your message from jimknighton@... hopefully you
          received my reply.

          Cheers,

          Peter.


          Jim Knighton wrote:
          > Peter,
          >
          > I've sent you several emails now, including one each on the last two
          > days. It appears that you aren't receiving them. I did get one email
          > from you a couple of days ago, to which I responded. I don't know
          > what is going on... With the messages I've sent you I've never
          > recieved an "undelivered" message, so from all I see it looks like
          > they are sent and received.
          >
          >
          > I changed my ISP a couple of months ago and also updated my profile
          > here in Yahoo to reflect that change. Sometimes, however, the old
          > email address still pops up. I don't know why or how to fix it.
          >
          > Will you please confirm your email address and maybe give me an
          > alternative if you have one?
          >
          > Until we get the communications working right it seems a bit
          > foolhardy to attempt a Paypal transfer although I'm ready and willing
          > to do so. I don't want to do a transfer only to have it fall into a
          > black hole somewhere. That could cause all sorts of frustration on
          > both ends. Please keep in mind that I really want to conclude this
          > transaction, however.
          >
          > So, my "real" email address is the one I gave you earlier:
          >
          > jim_knighton@... (The one message I received from you was sent to
          > this address)
          >
          > my old and defunct address is:
          >
          > jimknighton@... (don't use this one - that account is
          > dead. If you have it in your address book, please delete it).
          >
          > Here are a couple of "emergency backup" addresses we can try as well:
          >
          > jim_knighton@...
          > and
          > jim_knighton@...
          >
          > I'll make a point of checking these frequently until we get things
          > sorted out. I've never had this kind of problem before, and I do a
          > lot of email correspondence with people all around the world. This is
          > just crazy, and I don't have a clue which end the problem is on.
          >
          > Thanks for being persistent and contacting me this way. Hopefully, no
          > one else is having this problem.
          >
          > Anyway, As soon as this posts I'll send you three test messages from
          > each of the aforementioned active accounts in hopes that something
          > gets through. If I don't hear back from you "soon" I'll post another
          > message here to apprise you of that fact. So, here's hoping we can
          > sort it out.
          >
          > Regards,
          >
          > Jim
          >
          >
          >
          > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...> wrote:
          >
          >>Hi Jim,
          >>
          >>An email I sent you on the 29th has been undelivered with the
          >
          > message;
          >
          >>-------------------------
          >>This is the Postfix program at host webrdr.connect.com.au.
          >>
          >>I'm sorry to have to inform you that the message returned
          >>below could not be delivered to one or more destinations.
          >>
          >>For further assistance, please send mail to <postmaster>
          >>
          >>If you do so, please include this problem report. You can
          >>delete your own text from the message returned below.
          >>
          >> The Postfix program
          >>
          >><jim_knighton@m...>: connect to mx3.hotmail.com[65.54.244.200]:
          >
          > Connection
          >
          >> timed out
          >>
          >>---------------------------
          >>
          >>I sent you an email this morning. Did you receive it?
          >>
          >>Do you have another Enail address I can use?
          >>
          >>I can supply the DigiSpeed plus cable. The cost is 71.00 including
          >
          > postage.
          >
          >>I presume it is for installation in a Sherline DC motor controller
          >
          > housing?
          >
          >>Cheers,
          >>
          >>Peter.
          >>
          >>
          >>Jim Knighton wrote:
          >>
          >>>Hi Peter...
          >>>
          >>>I want to buy a Digispeed controller and also the MiniDin cable.
          >
          > In
          >
          >>>as much as payment will be via paypal I sent you an email to this
          >>>effect via the link on your web site. I guess it never went
          >
          > through.
          >
          >>>Anyway, it's for a small Sherline lathe with PMDX electronics
          >
          > running
          >
          >>>Mach 3 software. I'm assuming that since others are using Mach 3
          >
          > the
          >
          >>>setup is manageable. My thought was to run the cable (minus one
          >
          > end)
          >
          >>>directly to my PMDX breakout board. I'm not sure how to configure
          >>>Mach, but I suppose I'll sort it out soon enough.
          >>>
          >>>Contact me at jim_knighton@m...
          >>>
          >>>Regards,
          >>>
          >>>Jim
          >>>
          >>>
          >>>
          >>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
          >
          > wrote:
          >
          >>>>Hi Jim,
          >>>>
          >>>>I'm here. Don't recall seeing an email from you.
          >>>>
          >>>>How can I help.
          >>>>
          >>>>Cheers,
          >>>>
          >>>>
          >>>>Peter.
          >>>>
          >>>>
          >>>>Jim Knighton wrote:
          >>>>
          >>>>
          >>>>>Is there a US source for Peter Homann's Digispeed controller?
          >>>
          >>>I've
          >>>
          >>>
          >>>>>tried contacting him (last week) directly via his web site but
          >
          > so
          >
          >>>far
          >>>
          >>>
          >>>>>there hasn't been a response. Any thoughts?
          >>>>>
          >>>>>Regards,
          >>>>>
          >>>>>Jim
          >>>>>
          >>>>>
          >>>>>
          >>>>>
          >>>>>
          >>>>>
          >>>>>
          >>>>>
          >>>>>Yahoo! Groups Links
          >>>>>
          >>>>>
          >>>>>
          >>>>>
          >>>>>
          >>>>>
          >>>>>
          >>>>
          >>>>--
          >>>>------------------------------------------------------------------
          >>>>Web: www.homanndesigns.com
          >>>>email: homann@h...
          >>>>Phone: +61 421 601 665
          >>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
          >>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
          >>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
          >>>>
          >>>
          >>>
          >>>
          >>>
          >>>
          >>>
          >>>
          >>>
          >>>Yahoo! Groups Links
          >>>
          >>>
          >>>
          >>>
          >>>
          >>>
          >>>
          >>
          >>--
          >>------------------------------------------------------------------
          >>Web: www.homanndesigns.com
          >>email: homann@h...
          >>Phone: +61 421 601 665
          >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
          >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
          >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
          >>
          >
          >
          >
          >
          >
          >
          >
          >
          >
          > Yahoo! Groups Links
          >
          >
          >
          >
          >
          >
          >

          --
          ------------------------------------------------------------------
          Web: www.homanndesigns.com
          email: homann@...
          Phone: +61 421 601 665
          www.homanndesigns.com/ModIO.html - Modbus Interface Unit
          www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
          www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
        • Jim Knighton
          Peter, I ve sent messages to you from all three active accounts, and I ve gotten 1 response at the account: jimknighton@gmail.com There is nothing at all on
          Message 4 of 24 , Feb 1, 2006
          • 0 Attachment
            Peter,

            I've sent messages to you from all three active accounts, and I've
            gotten 1 response at the account:

            jimknighton@...

            There is nothing at all on the other two.

            After receiving that message I replyed saying that if you responded
            to this message I would try the paypal transfer. If you didn't get a
            message to that effect then it looks like we still have a problem.

            Clearly, email isn't working as it should...

            Regards,

            Jim




            --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...> wrote:
            >
            > Hi Jim,
            >
            > I am receiving your emails. You are not receiving mine??
            >
            >
            > I just replied to your message from jimknighton@g... hopefully you
            > received my reply.
            >
            > Cheers,
            >
            > Peter.
            >
            >
            > Jim Knighton wrote:
            > > Peter,
            > >
            > > I've sent you several emails now, including one each on the last
            two
            > > days. It appears that you aren't receiving them. I did get one
            email
            > > from you a couple of days ago, to which I responded. I don't know
            > > what is going on... With the messages I've sent you I've never
            > > recieved an "undelivered" message, so from all I see it looks
            like
            > > they are sent and received.
            > >
            > >
            > > I changed my ISP a couple of months ago and also updated my
            profile
            > > here in Yahoo to reflect that change. Sometimes, however, the old
            > > email address still pops up. I don't know why or how to fix it.
            > >
            > > Will you please confirm your email address and maybe give me an
            > > alternative if you have one?
            > >
            > > Until we get the communications working right it seems a bit
            > > foolhardy to attempt a Paypal transfer although I'm ready and
            willing
            > > to do so. I don't want to do a transfer only to have it fall into
            a
            > > black hole somewhere. That could cause all sorts of frustration
            on
            > > both ends. Please keep in mind that I really want to conclude
            this
            > > transaction, however.
            > >
            > > So, my "real" email address is the one I gave you earlier:
            > >
            > > jim_knighton@m... (The one message I received from you was sent
            to
            > > this address)
            > >
            > > my old and defunct address is:
            > >
            > > jimknighton@w... (don't use this one - that account is
            > > dead. If you have it in your address book, please delete it).
            > >
            > > Here are a couple of "emergency backup" addresses we can try as
            well:
            > >
            > > jim_knighton@g...
            > > and
            > > jim_knighton@j...
            > >
            > > I'll make a point of checking these frequently until we get
            things
            > > sorted out. I've never had this kind of problem before, and I do
            a
            > > lot of email correspondence with people all around the world.
            This is
            > > just crazy, and I don't have a clue which end the problem is on.
            > >
            > > Thanks for being persistent and contacting me this way.
            Hopefully, no
            > > one else is having this problem.
            > >
            > > Anyway, As soon as this posts I'll send you three test messages
            from
            > > each of the aforementioned active accounts in hopes that
            something
            > > gets through. If I don't hear back from you "soon" I'll post
            another
            > > message here to apprise you of that fact. So, here's hoping we
            can
            > > sort it out.
            > >
            > > Regards,
            > >
            > > Jim
            > >
            > >
            > >
            > > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
            wrote:
            > >
            > >>Hi Jim,
            > >>
            > >>An email I sent you on the 29th has been undelivered with the
            > >
            > > message;
            > >
            > >>-------------------------
            > >>This is the Postfix program at host webrdr.connect.com.au.
            > >>
            > >>I'm sorry to have to inform you that the message returned
            > >>below could not be delivered to one or more destinations.
            > >>
            > >>For further assistance, please send mail to <postmaster>
            > >>
            > >>If you do so, please include this problem report. You can
            > >>delete your own text from the message returned below.
            > >>
            > >> The Postfix program
            > >>
            > >><jim_knighton@m...>: connect to mx3.hotmail.com[65.54.244.200]:
            > >
            > > Connection
            > >
            > >> timed out
            > >>
            > >>---------------------------
            > >>
            > >>I sent you an email this morning. Did you receive it?
            > >>
            > >>Do you have another Enail address I can use?
            > >>
            > >>I can supply the DigiSpeed plus cable. The cost is 71.00
            including
            > >
            > > postage.
            > >
            > >>I presume it is for installation in a Sherline DC motor
            controller
            > >
            > > housing?
            > >
            > >>Cheers,
            > >>
            > >>Peter.
            > >>
            > >>
            > >>Jim Knighton wrote:
            > >>
            > >>>Hi Peter...
            > >>>
            > >>>I want to buy a Digispeed controller and also the MiniDin cable.
            > >
            > > In
            > >
            > >>>as much as payment will be via paypal I sent you an email to
            this
            > >>>effect via the link on your web site. I guess it never went
            > >
            > > through.
            > >
            > >>>Anyway, it's for a small Sherline lathe with PMDX electronics
            > >
            > > running
            > >
            > >>>Mach 3 software. I'm assuming that since others are using Mach 3
            > >
            > > the
            > >
            > >>>setup is manageable. My thought was to run the cable (minus one
            > >
            > > end)
            > >
            > >>>directly to my PMDX breakout board. I'm not sure how to
            configure
            > >>>Mach, but I suppose I'll sort it out soon enough.
            > >>>
            > >>>Contact me at jim_knighton@m...
            > >>>
            > >>>Regards,
            > >>>
            > >>>Jim
            > >>>
            > >>>
            > >>>
            > >>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
            > >
            > > wrote:
            > >
            > >>>>Hi Jim,
            > >>>>
            > >>>>I'm here. Don't recall seeing an email from you.
            > >>>>
            > >>>>How can I help.
            > >>>>
            > >>>>Cheers,
            > >>>>
            > >>>>
            > >>>>Peter.
            > >>>>
            > >>>>
            > >>>>Jim Knighton wrote:
            > >>>>
            > >>>>
            > >>>>>Is there a US source for Peter Homann's Digispeed controller?
            > >>>
            > >>>I've
            > >>>
            > >>>
            > >>>>>tried contacting him (last week) directly via his web site but
            > >
            > > so
            > >
            > >>>far
            > >>>
            > >>>
            > >>>>>there hasn't been a response. Any thoughts?
            > >>>>>
            > >>>>>Regards,
            > >>>>>
            > >>>>>Jim
            > >>>>>
            > >>>>>
            > >>>>>
            > >>>>>
            > >>>>>
            > >>>>>
            > >>>>>
            > >>>>>
            > >>>>>Yahoo! Groups Links
            > >>>>>
            > >>>>>
            > >>>>>
            > >>>>>
            > >>>>>
            > >>>>>
            > >>>>>
            > >>>>
            > >>>>--
            > >>>>----------------------------------------------------------------
            --
            > >>>>Web: www.homanndesigns.com
            > >>>>email: homann@h...
            > >>>>Phone: +61 421 601 665
            > >>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
            > >>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
            > >>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
            board
            > >>>>
            > >>>
            > >>>
            > >>>
            > >>>
            > >>>
            > >>>
            > >>>
            > >>>
            > >>>Yahoo! Groups Links
            > >>>
            > >>>
            > >>>
            > >>>
            > >>>
            > >>>
            > >>>
            > >>
            > >>--
            > >>------------------------------------------------------------------
            > >>Web: www.homanndesigns.com
            > >>email: homann@h...
            > >>Phone: +61 421 601 665
            > >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
            > >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
            > >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
            > >>
            > >
            > >
            > >
            > >
            > >
            > >
            > >
            > >
            > >
            > > Yahoo! Groups Links
            > >
            > >
            > >
            > >
            > >
            > >
            > >
            >
            > --
            > ------------------------------------------------------------------
            > Web: www.homanndesigns.com
            > email: homann@h...
            > Phone: +61 421 601 665
            > www.homanndesigns.com/ModIO.html - Modbus Interface Unit
            > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
            > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
            >
          • Jim Knighton
            Peter, I don t know if you ve sent anything, but there hasn t been any email activity on this end for over an hour. Regards, Jim ... two ... email ... like ...
            Message 5 of 24 , Feb 1, 2006
            • 0 Attachment
              Peter,

              I don't know if you've sent anything, but there hasn't been any email
              activity on this end for over an hour.

              Regards,

              Jim




              --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...> wrote:
              >
              > Hi Jim,
              >
              > I am receiving your emails. You are not receiving mine??
              >
              >
              > I just replied to your message from jimknighton@g... hopefully you
              > received my reply.
              >
              > Cheers,
              >
              > Peter.
              >
              >
              > Jim Knighton wrote:
              > > Peter,
              > >
              > > I've sent you several emails now, including one each on the last
              two
              > > days. It appears that you aren't receiving them. I did get one
              email
              > > from you a couple of days ago, to which I responded. I don't know
              > > what is going on... With the messages I've sent you I've never
              > > recieved an "undelivered" message, so from all I see it looks
              like
              > > they are sent and received.
              > >
              > >
              > > I changed my ISP a couple of months ago and also updated my
              profile
              > > here in Yahoo to reflect that change. Sometimes, however, the old
              > > email address still pops up. I don't know why or how to fix it.
              > >
              > > Will you please confirm your email address and maybe give me an
              > > alternative if you have one?
              > >
              > > Until we get the communications working right it seems a bit
              > > foolhardy to attempt a Paypal transfer although I'm ready and
              willing
              > > to do so. I don't want to do a transfer only to have it fall into
              a
              > > black hole somewhere. That could cause all sorts of frustration
              on
              > > both ends. Please keep in mind that I really want to conclude
              this
              > > transaction, however.
              > >
              > > So, my "real" email address is the one I gave you earlier:
              > >
              > > jim_knighton@m... (The one message I received from you was sent
              to
              > > this address)
              > >
              > > my old and defunct address is:
              > >
              > > jimknighton@w... (don't use this one - that account is
              > > dead. If you have it in your address book, please delete it).
              > >
              > > Here are a couple of "emergency backup" addresses we can try as
              well:
              > >
              > > jim_knighton@g...
              > > and
              > > jim_knighton@j...
              > >
              > > I'll make a point of checking these frequently until we get
              things
              > > sorted out. I've never had this kind of problem before, and I do
              a
              > > lot of email correspondence with people all around the world.
              This is
              > > just crazy, and I don't have a clue which end the problem is on.
              > >
              > > Thanks for being persistent and contacting me this way.
              Hopefully, no
              > > one else is having this problem.
              > >
              > > Anyway, As soon as this posts I'll send you three test messages
              from
              > > each of the aforementioned active accounts in hopes that
              something
              > > gets through. If I don't hear back from you "soon" I'll post
              another
              > > message here to apprise you of that fact. So, here's hoping we
              can
              > > sort it out.
              > >
              > > Regards,
              > >
              > > Jim
              > >
              > >
              > >
              > > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
              wrote:
              > >
              > >>Hi Jim,
              > >>
              > >>An email I sent you on the 29th has been undelivered with the
              > >
              > > message;
              > >
              > >>-------------------------
              > >>This is the Postfix program at host webrdr.connect.com.au.
              > >>
              > >>I'm sorry to have to inform you that the message returned
              > >>below could not be delivered to one or more destinations.
              > >>
              > >>For further assistance, please send mail to <postmaster>
              > >>
              > >>If you do so, please include this problem report. You can
              > >>delete your own text from the message returned below.
              > >>
              > >> The Postfix program
              > >>
              > >><jim_knighton@m...>: connect to mx3.hotmail.com[65.54.244.200]:
              > >
              > > Connection
              > >
              > >> timed out
              > >>
              > >>---------------------------
              > >>
              > >>I sent you an email this morning. Did you receive it?
              > >>
              > >>Do you have another Enail address I can use?
              > >>
              > >>I can supply the DigiSpeed plus cable. The cost is 71.00
              including
              > >
              > > postage.
              > >
              > >>I presume it is for installation in a Sherline DC motor
              controller
              > >
              > > housing?
              > >
              > >>Cheers,
              > >>
              > >>Peter.
              > >>
              > >>
              > >>Jim Knighton wrote:
              > >>
              > >>>Hi Peter...
              > >>>
              > >>>I want to buy a Digispeed controller and also the MiniDin cable.
              > >
              > > In
              > >
              > >>>as much as payment will be via paypal I sent you an email to
              this
              > >>>effect via the link on your web site. I guess it never went
              > >
              > > through.
              > >
              > >>>Anyway, it's for a small Sherline lathe with PMDX electronics
              > >
              > > running
              > >
              > >>>Mach 3 software. I'm assuming that since others are using Mach 3
              > >
              > > the
              > >
              > >>>setup is manageable. My thought was to run the cable (minus one
              > >
              > > end)
              > >
              > >>>directly to my PMDX breakout board. I'm not sure how to
              configure
              > >>>Mach, but I suppose I'll sort it out soon enough.
              > >>>
              > >>>Contact me at jim_knighton@m...
              > >>>
              > >>>Regards,
              > >>>
              > >>>Jim
              > >>>
              > >>>
              > >>>
              > >>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
              > >
              > > wrote:
              > >
              > >>>>Hi Jim,
              > >>>>
              > >>>>I'm here. Don't recall seeing an email from you.
              > >>>>
              > >>>>How can I help.
              > >>>>
              > >>>>Cheers,
              > >>>>
              > >>>>
              > >>>>Peter.
              > >>>>
              > >>>>
              > >>>>Jim Knighton wrote:
              > >>>>
              > >>>>
              > >>>>>Is there a US source for Peter Homann's Digispeed controller?
              > >>>
              > >>>I've
              > >>>
              > >>>
              > >>>>>tried contacting him (last week) directly via his web site but
              > >
              > > so
              > >
              > >>>far
              > >>>
              > >>>
              > >>>>>there hasn't been a response. Any thoughts?
              > >>>>>
              > >>>>>Regards,
              > >>>>>
              > >>>>>Jim
              > >>>>>
              > >>>>>
              > >>>>>
              > >>>>>
              > >>>>>
              > >>>>>
              > >>>>>
              > >>>>>
              > >>>>>Yahoo! Groups Links
              > >>>>>
              > >>>>>
              > >>>>>
              > >>>>>
              > >>>>>
              > >>>>>
              > >>>>>
              > >>>>
              > >>>>--
              > >>>>----------------------------------------------------------------
              --
              > >>>>Web: www.homanndesigns.com
              > >>>>email: homann@h...
              > >>>>Phone: +61 421 601 665
              > >>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
              > >>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
              > >>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
              board
              > >>>>
              > >>>
              > >>>
              > >>>
              > >>>
              > >>>
              > >>>
              > >>>
              > >>>
              > >>>Yahoo! Groups Links
              > >>>
              > >>>
              > >>>
              > >>>
              > >>>
              > >>>
              > >>>
              > >>
              > >>--
              > >>------------------------------------------------------------------
              > >>Web: www.homanndesigns.com
              > >>email: homann@h...
              > >>Phone: +61 421 601 665
              > >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
              > >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
              > >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
              > >>
              > >
              > >
              > >
              > >
              > >
              > >
              > >
              > >
              > >
              > > Yahoo! Groups Links
              > >
              > >
              > >
              > >
              > >
              > >
              > >
              >
              > --
              > ------------------------------------------------------------------
              > Web: www.homanndesigns.com
              > email: homann@h...
              > Phone: +61 421 601 665
              > www.homanndesigns.com/ModIO.html - Modbus Interface Unit
              > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
              > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
              >
            • Peter Homann
              Hi Jim, I went to bed after sending the first 2 test messages. I just sent a message to jimknighton@juno.com I am receiving email from all 3 addresses. You
              Message 6 of 24 , Feb 1, 2006
              • 0 Attachment
                Hi Jim,

                I went to bed after sending the first 2 test messages. I just sent a message
                to jimknighton@...

                I am receiving email from all 3 addresses. You don't seem to be getting my
                replys sent to jim_knighton@...

                Cheers,

                Peter.

                Jim Knighton wrote:
                > Peter,
                >
                > I don't know if you've sent anything, but there hasn't been any email
                > activity on this end for over an hour.
                >
                > Regards,
                >
                > Jim
                >
                >
                >
                >
                > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...> wrote:
                >
                >>Hi Jim,
                >>
                >>I am receiving your emails. You are not receiving mine??
                >>
                >>
                >>I just replied to your message from jimknighton@g... hopefully you
                >>received my reply.
                >>
                >>Cheers,
                >>
                >>Peter.
                >>
                >>
                >>Jim Knighton wrote:
                >>
                >>>Peter,
                >>>
                >>>I've sent you several emails now, including one each on the last
                >
                > two
                >
                >>>days. It appears that you aren't receiving them. I did get one
                >
                > email
                >
                >>>from you a couple of days ago, to which I responded. I don't know
                >>>what is going on... With the messages I've sent you I've never
                >>>recieved an "undelivered" message, so from all I see it looks
                >
                > like
                >
                >>>they are sent and received.
                >>>
                >>>
                >>>I changed my ISP a couple of months ago and also updated my
                >
                > profile
                >
                >>>here in Yahoo to reflect that change. Sometimes, however, the old
                >>>email address still pops up. I don't know why or how to fix it.
                >>>
                >>>Will you please confirm your email address and maybe give me an
                >>>alternative if you have one?
                >>>
                >>>Until we get the communications working right it seems a bit
                >>>foolhardy to attempt a Paypal transfer although I'm ready and
                >
                > willing
                >
                >>>to do so. I don't want to do a transfer only to have it fall into
                >
                > a
                >
                >>>black hole somewhere. That could cause all sorts of frustration
                >
                > on
                >
                >>>both ends. Please keep in mind that I really want to conclude
                >
                > this
                >
                >>>transaction, however.
                >>>
                >>>So, my "real" email address is the one I gave you earlier:
                >>>
                >>>jim_knighton@m... (The one message I received from you was sent
                >
                > to
                >
                >>>this address)
                >>>
                >>>my old and defunct address is:
                >>>
                >>>jimknighton@w... (don't use this one - that account is
                >>>dead. If you have it in your address book, please delete it).
                >>>
                >>>Here are a couple of "emergency backup" addresses we can try as
                >
                > well:
                >
                >>>jim_knighton@g...
                >>>and
                >>>jim_knighton@j...
                >>>
                >>>I'll make a point of checking these frequently until we get
                >
                > things
                >
                >>>sorted out. I've never had this kind of problem before, and I do
                >
                > a
                >
                >>>lot of email correspondence with people all around the world.
                >
                > This is
                >
                >>>just crazy, and I don't have a clue which end the problem is on.
                >>>
                >>>Thanks for being persistent and contacting me this way.
                >
                > Hopefully, no
                >
                >>>one else is having this problem.
                >>>
                >>>Anyway, As soon as this posts I'll send you three test messages
                >
                > from
                >
                >>>each of the aforementioned active accounts in hopes that
                >
                > something
                >
                >>>gets through. If I don't hear back from you "soon" I'll post
                >
                > another
                >
                >>>message here to apprise you of that fact. So, here's hoping we
                >
                > can
                >
                >>>sort it out.
                >>>
                >>>Regards,
                >>>
                >>>Jim
                >>>
                >>>
                >>>
                >>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                >
                > wrote:
                >
                >>>>Hi Jim,
                >>>>
                >>>>An email I sent you on the 29th has been undelivered with the
                >>>
                >>>message;
                >>>
                >>>
                >>>>-------------------------
                >>>>This is the Postfix program at host webrdr.connect.com.au.
                >>>>
                >>>>I'm sorry to have to inform you that the message returned
                >>>>below could not be delivered to one or more destinations.
                >>>>
                >>>>For further assistance, please send mail to <postmaster>
                >>>>
                >>>>If you do so, please include this problem report. You can
                >>>>delete your own text from the message returned below.
                >>>>
                >>>> The Postfix program
                >>>>
                >>>><jim_knighton@m...>: connect to mx3.hotmail.com[65.54.244.200]:
                >>>
                >>>Connection
                >>>
                >>>
                >>>> timed out
                >>>>
                >>>>---------------------------
                >>>>
                >>>>I sent you an email this morning. Did you receive it?
                >>>>
                >>>>Do you have another Enail address I can use?
                >>>>
                >>>>I can supply the DigiSpeed plus cable. The cost is 71.00
                >
                > including
                >
                >>>postage.
                >>>
                >>>
                >>>>I presume it is for installation in a Sherline DC motor
                >
                > controller
                >
                >>>housing?
                >>>
                >>>
                >>>>Cheers,
                >>>>
                >>>>Peter.
                >>>>
                >>>>
                >>>>Jim Knighton wrote:
                >>>>
                >>>>
                >>>>>Hi Peter...
                >>>>>
                >>>>>I want to buy a Digispeed controller and also the MiniDin cable.
                >>>
                >>>In
                >>>
                >>>
                >>>>>as much as payment will be via paypal I sent you an email to
                >
                > this
                >
                >>>>>effect via the link on your web site. I guess it never went
                >>>
                >>>through.
                >>>
                >>>
                >>>>>Anyway, it's for a small Sherline lathe with PMDX electronics
                >>>
                >>>running
                >>>
                >>>
                >>>>>Mach 3 software. I'm assuming that since others are using Mach 3
                >>>
                >>>the
                >>>
                >>>
                >>>>>setup is manageable. My thought was to run the cable (minus one
                >>>
                >>>end)
                >>>
                >>>
                >>>>>directly to my PMDX breakout board. I'm not sure how to
                >
                > configure
                >
                >>>>>Mach, but I suppose I'll sort it out soon enough.
                >>>>>
                >>>>>Contact me at jim_knighton@m...
                >>>>>
                >>>>>Regards,
                >>>>>
                >>>>>Jim
                >>>>>
                >>>>>
                >>>>>
                >>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                >>>
                >>>wrote:
                >>>
                >>>
                >>>>>>Hi Jim,
                >>>>>>
                >>>>>>I'm here. Don't recall seeing an email from you.
                >>>>>>
                >>>>>>How can I help.
                >>>>>>
                >>>>>>Cheers,
                >>>>>>
                >>>>>>
                >>>>>>Peter.
                >>>>>>
                >>>>>>
                >>>>>>Jim Knighton wrote:
                >>>>>>
                >>>>>>
                >>>>>>
                >>>>>>>Is there a US source for Peter Homann's Digispeed controller?
                >>>>>
                >>>>>I've
                >>>>>
                >>>>>
                >>>>>
                >>>>>>>tried contacting him (last week) directly via his web site but
                >>>
                >>>so
                >>>
                >>>
                >>>>>far
                >>>>>
                >>>>>
                >>>>>
                >>>>>>>there hasn't been a response. Any thoughts?
                >>>>>>>
                >>>>>>>Regards,
                >>>>>>>
                >>>>>>>Jim
                >>>>>>>
                >>>>>>>
                >>>>>>>
                >>>>>>>
                >>>>>>>
                >>>>>>>
                >>>>>>>
                >>>>>>>
                >>>>>>>Yahoo! Groups Links
                >>>>>>>
                >>>>>>>
                >>>>>>>
                >>>>>>>
                >>>>>>>
                >>>>>>>
                >>>>>>>
                >>>>>>
                >>>>>>--
                >>>>>>----------------------------------------------------------------
                >
                > --
                >
                >>>>>>Web: www.homanndesigns.com
                >>>>>>email: homann@h...
                >>>>>>Phone: +61 421 601 665
                >>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                >>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                >>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                >
                > board
                >
                >>>>>
                >>>>>
                >>>>>
                >>>>>
                >>>>>
                >>>>>
                >>>>>
                >>>>>Yahoo! Groups Links
                >>>>>
                >>>>>
                >>>>>
                >>>>>
                >>>>>
                >>>>>
                >>>>>
                >>>>
                >>>>--
                >>>>------------------------------------------------------------------
                >>>>Web: www.homanndesigns.com
                >>>>email: homann@h...
                >>>>Phone: +61 421 601 665
                >>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                >>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                >>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                >>>>
                >>>
                >>>
                >>>
                >>>
                >>>
                >>>
                >>>
                >>>
                >>>
                >>>Yahoo! Groups Links
                >>>
                >>>
                >>>
                >>>
                >>>
                >>>
                >>>
                >>
                >>--
                >>------------------------------------------------------------------
                >>Web: www.homanndesigns.com
                >>email: homann@h...
                >>Phone: +61 421 601 665
                >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                >>
                >
                >
                >
                >
                >
                >
                >
                >
                > Yahoo! Groups Links
                >
                >
                >
                >
                >
                >
                >
                >
                >
                >

                --
                ------------------------------------------------------------------
                Web: www.homanndesigns.com
                email: homann@...
                Phone: +61 421 601 665
                www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
              • Jim Knighton
                Peter, I don t know if you received it or if you replied. I ve not seen a response to the last message I sent. There hasn t been any email activity from you
                Message 7 of 24 , Feb 1, 2006
                • 0 Attachment
                  Peter,

                  I don't know if you received it or if you replied. I've not seen a
                  response to the last message I sent. There hasn't been any email
                  activity from you for several hours. Perhaps that's because of the
                  huge time zone difference. Perhaps there is still a problem. Anyway,
                  I've not received any responses at all to the messages I sent you via
                  the MSN or Juno email accounts or my last one sent via gmail. Again,
                  I don't know if that's because you didn't receive them or if I didn't
                  receive your responses. Neither have I received any "returned mail"
                  messages or seen anything else that would suggest the problem is on
                  my end or with my ISP.

                  I've been corresponding (today) with other people from these accounts
                  without any difficult or evidence of lost or dropped messages. Other
                  than my corresponance with you, I'm not seeing this problem anywhere
                  else. Regardless, it certainly seems flakey.

                  Regards,

                  Jim

                  --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@...> wrote:
                  >
                  > Hi Jim,
                  >
                  > I am receiving your emails. You are not receiving mine??
                  >
                  >
                  > I just replied to your message from jimknighton@... hopefully you
                  > received my reply.
                  >
                  > Cheers,
                  >
                  > Peter.
                  >
                  >
                  > Jim Knighton wrote:
                  > > Peter,
                  > >
                  > > I've sent you several emails now, including one each on the last
                  two
                  > > days. It appears that you aren't receiving them. I did get one
                  email
                  > > from you a couple of days ago, to which I responded. I don't know
                  > > what is going on... With the messages I've sent you I've never
                  > > recieved an "undelivered" message, so from all I see it looks
                  like
                  > > they are sent and received.
                  > >
                  > >
                  > > I changed my ISP a couple of months ago and also updated my
                  profile
                  > > here in Yahoo to reflect that change. Sometimes, however, the old
                  > > email address still pops up. I don't know why or how to fix it.
                  > >
                  > > Will you please confirm your email address and maybe give me an
                  > > alternative if you have one?
                  > >
                  > > Until we get the communications working right it seems a bit
                  > > foolhardy to attempt a Paypal transfer although I'm ready and
                  willing
                  > > to do so. I don't want to do a transfer only to have it fall into
                  a
                  > > black hole somewhere. That could cause all sorts of frustration
                  on
                  > > both ends. Please keep in mind that I really want to conclude
                  this
                  > > transaction, however.
                  > >
                  > > So, my "real" email address is the one I gave you earlier:
                  > >
                  > > jim_knighton@... (The one message I received from you was sent to
                  > > this address)
                  > >
                  > > my old and defunct address is:
                  > >
                  > > jimknighton@... (don't use this one - that account is
                  > > dead. If you have it in your address book, please delete it).
                  > >
                  > > Here are a couple of "emergency backup" addresses we can try as
                  well:
                  > >
                  > > jim_knighton@...
                  > > and
                  > > jim_knighton@...
                  > >
                  > > I'll make a point of checking these frequently until we get
                  things
                  > > sorted out. I've never had this kind of problem before, and I do
                  a
                  > > lot of email correspondence with people all around the world.
                  This is
                  > > just crazy, and I don't have a clue which end the problem is on.
                  > >
                  > > Thanks for being persistent and contacting me this way.
                  Hopefully, no
                  > > one else is having this problem.
                  > >
                  > > Anyway, As soon as this posts I'll send you three test messages
                  from
                  > > each of the aforementioned active accounts in hopes that
                  something
                  > > gets through. If I don't hear back from you "soon" I'll post
                  another
                  > > message here to apprise you of that fact. So, here's hoping we
                  can
                  > > sort it out.
                  > >
                  > > Regards,
                  > >
                  > > Jim
                  > >
                  > >
                  > >
                  > > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                  wrote:
                  > >
                  > >>Hi Jim,
                  > >>
                  > >>An email I sent you on the 29th has been undelivered with the
                  > >
                  > > message;
                  > >
                  > >>-------------------------
                  > >>This is the Postfix program at host webrdr.connect.com.au.
                  > >>
                  > >>I'm sorry to have to inform you that the message returned
                  > >>below could not be delivered to one or more destinations.
                  > >>
                  > >>For further assistance, please send mail to <postmaster>
                  > >>
                  > >>If you do so, please include this problem report. You can
                  > >>delete your own text from the message returned below.
                  > >>
                  > >> The Postfix program
                  > >>
                  > >><jim_knighton@m...>: connect to mx3.hotmail.com[65.54.244.200]:
                  > >
                  > > Connection
                  > >
                  > >> timed out
                  > >>
                  > >>---------------------------
                  > >>
                  > >>I sent you an email this morning. Did you receive it?
                  > >>
                  > >>Do you have another Enail address I can use?
                  > >>
                  > >>I can supply the DigiSpeed plus cable. The cost is 71.00
                  including
                  > >
                  > > postage.
                  > >
                  > >>I presume it is for installation in a Sherline DC motor
                  controller
                  > >
                  > > housing?
                  > >
                  > >>Cheers,
                  > >>
                  > >>Peter.
                  > >>
                  > >>
                  > >>Jim Knighton wrote:
                  > >>
                  > >>>Hi Peter...
                  > >>>
                  > >>>I want to buy a Digispeed controller and also the MiniDin cable.
                  > >
                  > > In
                  > >
                  > >>>as much as payment will be via paypal I sent you an email to
                  this
                  > >>>effect via the link on your web site. I guess it never went
                  > >
                  > > through.
                  > >
                  > >>>Anyway, it's for a small Sherline lathe with PMDX electronics
                  > >
                  > > running
                  > >
                  > >>>Mach 3 software. I'm assuming that since others are using Mach 3
                  > >
                  > > the
                  > >
                  > >>>setup is manageable. My thought was to run the cable (minus one
                  > >
                  > > end)
                  > >
                  > >>>directly to my PMDX breakout board. I'm not sure how to
                  configure
                  > >>>Mach, but I suppose I'll sort it out soon enough.
                  > >>>
                  > >>>Contact me at jim_knighton@m...
                  > >>>
                  > >>>Regards,
                  > >>>
                  > >>>Jim
                  > >>>
                  > >>>
                  > >>>
                  > >>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                  > >
                  > > wrote:
                  > >
                  > >>>>Hi Jim,
                  > >>>>
                  > >>>>I'm here. Don't recall seeing an email from you.
                  > >>>>
                  > >>>>How can I help.
                  > >>>>
                  > >>>>Cheers,
                  > >>>>
                  > >>>>
                  > >>>>Peter.
                  > >>>>
                  > >>>>
                  > >>>>Jim Knighton wrote:
                  > >>>>
                  > >>>>
                  > >>>>>Is there a US source for Peter Homann's Digispeed controller?
                  > >>>
                  > >>>I've
                  > >>>
                  > >>>
                  > >>>>>tried contacting him (last week) directly via his web site but
                  > >
                  > > so
                  > >
                  > >>>far
                  > >>>
                  > >>>
                  > >>>>>there hasn't been a response. Any thoughts?
                  > >>>>>
                  > >>>>>Regards,
                  > >>>>>
                  > >>>>>Jim
                  > >>>>>
                  > >>>>>
                  > >>>>>
                  > >>>>>
                  > >>>>>
                  > >>>>>
                  > >>>>>
                  > >>>>>
                  > >>>>>Yahoo! Groups Links
                  > >>>>>
                  > >>>>>
                  > >>>>>
                  > >>>>>
                  > >>>>>
                  > >>>>>
                  > >>>>>
                  > >>>>
                  > >>>>--
                  > >>>>----------------------------------------------------------------
                  --
                  > >>>>Web: www.homanndesigns.com
                  > >>>>email: homann@h...
                  > >>>>Phone: +61 421 601 665
                  > >>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                  > >>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                  > >>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                  board
                  > >>>>
                  > >>>
                  > >>>
                  > >>>
                  > >>>
                  > >>>
                  > >>>
                  > >>>
                  > >>>
                  > >>>Yahoo! Groups Links
                  > >>>
                  > >>>
                  > >>>
                  > >>>
                  > >>>
                  > >>>
                  > >>>
                  > >>
                  > >>--
                  > >>------------------------------------------------------------------
                  > >>Web: www.homanndesigns.com
                  > >>email: homann@h...
                  > >>Phone: +61 421 601 665
                  > >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                  > >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                  > >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                  > >>
                  > >
                  > >
                  > >
                  > >
                  > >
                  > >
                  > >
                  > >
                  > >
                  > > Yahoo! Groups Links
                  > >
                  > >
                  > >
                  > >
                  > >
                  > >
                  > >
                  >
                  > --
                  > ------------------------------------------------------------------
                  > Web: www.homanndesigns.com
                  > email: homann@...
                  > Phone: +61 421 601 665
                  > www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                  > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                  > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                  >
                • Peter Homann
                  Jim, I just sent 3 test messages. On to each address. BTW I am receiving every message you send. Cheers, Peter. ... -- ... Web: www.homanndesigns.com email:
                  Message 8 of 24 , Feb 1, 2006
                  • 0 Attachment
                    Jim,

                    I just sent 3 test messages. On to each address.


                    BTW I am receiving every message you send.

                    Cheers,

                    Peter.

                    Jim Knighton wrote:
                    > Peter,
                    >
                    > I don't know if you received it or if you replied. I've not seen a
                    > response to the last message I sent. There hasn't been any email
                    > activity from you for several hours. Perhaps that's because of the
                    > huge time zone difference. Perhaps there is still a problem. Anyway,
                    > I've not received any responses at all to the messages I sent you via
                    > the MSN or Juno email accounts or my last one sent via gmail. Again,
                    > I don't know if that's because you didn't receive them or if I didn't
                    > receive your responses. Neither have I received any "returned mail"
                    > messages or seen anything else that would suggest the problem is on
                    > my end or with my ISP.
                    >
                    > I've been corresponding (today) with other people from these accounts
                    > without any difficult or evidence of lost or dropped messages. Other
                    > than my corresponance with you, I'm not seeing this problem anywhere
                    > else. Regardless, it certainly seems flakey.
                    >
                    > Regards,
                    >
                    > Jim
                    >
                    > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@...> wrote:
                    >
                    >>Hi Jim,
                    >>
                    >>I am receiving your emails. You are not receiving mine??
                    >>
                    >>
                    >>I just replied to your message from jimknighton@... hopefully you
                    >>received my reply.
                    >>
                    >>Cheers,
                    >>
                    >>Peter.
                    >>
                    >>
                    >>Jim Knighton wrote:
                    >>
                    >>>Peter,
                    >>>
                    >>>I've sent you several emails now, including one each on the last
                    >
                    > two
                    >
                    >>>days. It appears that you aren't receiving them. I did get one
                    >
                    > email
                    >
                    >>>from you a couple of days ago, to which I responded. I don't know
                    >>>what is going on... With the messages I've sent you I've never
                    >>>recieved an "undelivered" message, so from all I see it looks
                    >
                    > like
                    >
                    >>>they are sent and received.
                    >>>
                    >>>
                    >>>I changed my ISP a couple of months ago and also updated my
                    >
                    > profile
                    >
                    >>>here in Yahoo to reflect that change. Sometimes, however, the old
                    >>>email address still pops up. I don't know why or how to fix it.
                    >>>
                    >>>Will you please confirm your email address and maybe give me an
                    >>>alternative if you have one?
                    >>>
                    >>>Until we get the communications working right it seems a bit
                    >>>foolhardy to attempt a Paypal transfer although I'm ready and
                    >
                    > willing
                    >
                    >>>to do so. I don't want to do a transfer only to have it fall into
                    >
                    > a
                    >
                    >>>black hole somewhere. That could cause all sorts of frustration
                    >
                    > on
                    >
                    >>>both ends. Please keep in mind that I really want to conclude
                    >
                    > this
                    >
                    >>>transaction, however.
                    >>>
                    >>>So, my "real" email address is the one I gave you earlier:
                    >>>
                    >>>jim_knighton@... (The one message I received from you was sent to
                    >>>this address)
                    >>>
                    >>>my old and defunct address is:
                    >>>
                    >>>jimknighton@... (don't use this one - that account is
                    >>>dead. If you have it in your address book, please delete it).
                    >>>
                    >>>Here are a couple of "emergency backup" addresses we can try as
                    >
                    > well:
                    >
                    >>>jim_knighton@...
                    >>>and
                    >>>jim_knighton@...
                    >>>
                    >>>I'll make a point of checking these frequently until we get
                    >
                    > things
                    >
                    >>>sorted out. I've never had this kind of problem before, and I do
                    >
                    > a
                    >
                    >>>lot of email correspondence with people all around the world.
                    >
                    > This is
                    >
                    >>>just crazy, and I don't have a clue which end the problem is on.
                    >>>
                    >>>Thanks for being persistent and contacting me this way.
                    >
                    > Hopefully, no
                    >
                    >>>one else is having this problem.
                    >>>
                    >>>Anyway, As soon as this posts I'll send you three test messages
                    >
                    > from
                    >
                    >>>each of the aforementioned active accounts in hopes that
                    >
                    > something
                    >
                    >>>gets through. If I don't hear back from you "soon" I'll post
                    >
                    > another
                    >
                    >>>message here to apprise you of that fact. So, here's hoping we
                    >
                    > can
                    >
                    >>>sort it out.
                    >>>
                    >>>Regards,
                    >>>
                    >>>Jim
                    >>>
                    >>>
                    >>>
                    >>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                    >
                    > wrote:
                    >
                    >>>>Hi Jim,
                    >>>>
                    >>>>An email I sent you on the 29th has been undelivered with the
                    >>>
                    >>>message;
                    >>>
                    >>>
                    >>>>-------------------------
                    >>>>This is the Postfix program at host webrdr.connect.com.au.
                    >>>>
                    >>>>I'm sorry to have to inform you that the message returned
                    >>>>below could not be delivered to one or more destinations.
                    >>>>
                    >>>>For further assistance, please send mail to <postmaster>
                    >>>>
                    >>>>If you do so, please include this problem report. You can
                    >>>>delete your own text from the message returned below.
                    >>>>
                    >>>> The Postfix program
                    >>>>
                    >>>><jim_knighton@m...>: connect to mx3.hotmail.com[65.54.244.200]:
                    >>>
                    >>>Connection
                    >>>
                    >>>
                    >>>> timed out
                    >>>>
                    >>>>---------------------------
                    >>>>
                    >>>>I sent you an email this morning. Did you receive it?
                    >>>>
                    >>>>Do you have another Enail address I can use?
                    >>>>
                    >>>>I can supply the DigiSpeed plus cable. The cost is 71.00
                    >
                    > including
                    >
                    >>>postage.
                    >>>
                    >>>
                    >>>>I presume it is for installation in a Sherline DC motor
                    >
                    > controller
                    >
                    >>>housing?
                    >>>
                    >>>
                    >>>>Cheers,
                    >>>>
                    >>>>Peter.
                    >>>>
                    >>>>
                    >>>>Jim Knighton wrote:
                    >>>>
                    >>>>
                    >>>>>Hi Peter...
                    >>>>>
                    >>>>>I want to buy a Digispeed controller and also the MiniDin cable.
                    >>>
                    >>>In
                    >>>
                    >>>
                    >>>>>as much as payment will be via paypal I sent you an email to
                    >
                    > this
                    >
                    >>>>>effect via the link on your web site. I guess it never went
                    >>>
                    >>>through.
                    >>>
                    >>>
                    >>>>>Anyway, it's for a small Sherline lathe with PMDX electronics
                    >>>
                    >>>running
                    >>>
                    >>>
                    >>>>>Mach 3 software. I'm assuming that since others are using Mach 3
                    >>>
                    >>>the
                    >>>
                    >>>
                    >>>>>setup is manageable. My thought was to run the cable (minus one
                    >>>
                    >>>end)
                    >>>
                    >>>
                    >>>>>directly to my PMDX breakout board. I'm not sure how to
                    >
                    > configure
                    >
                    >>>>>Mach, but I suppose I'll sort it out soon enough.
                    >>>>>
                    >>>>>Contact me at jim_knighton@m...
                    >>>>>
                    >>>>>Regards,
                    >>>>>
                    >>>>>Jim
                    >>>>>
                    >>>>>
                    >>>>>
                    >>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                    >>>
                    >>>wrote:
                    >>>
                    >>>
                    >>>>>>Hi Jim,
                    >>>>>>
                    >>>>>>I'm here. Don't recall seeing an email from you.
                    >>>>>>
                    >>>>>>How can I help.
                    >>>>>>
                    >>>>>>Cheers,
                    >>>>>>
                    >>>>>>
                    >>>>>>Peter.
                    >>>>>>
                    >>>>>>
                    >>>>>>Jim Knighton wrote:
                    >>>>>>
                    >>>>>>
                    >>>>>>
                    >>>>>>>Is there a US source for Peter Homann's Digispeed controller?
                    >>>>>
                    >>>>>I've
                    >>>>>
                    >>>>>
                    >>>>>
                    >>>>>>>tried contacting him (last week) directly via his web site but
                    >>>
                    >>>so
                    >>>
                    >>>
                    >>>>>far
                    >>>>>
                    >>>>>
                    >>>>>
                    >>>>>>>there hasn't been a response. Any thoughts?
                    >>>>>>>
                    >>>>>>>Regards,
                    >>>>>>>
                    >>>>>>>Jim
                    >>>>>>>
                    >>>>>>>
                    >>>>>>>
                    >>>>>>>
                    >>>>>>>
                    >>>>>>>
                    >>>>>>>
                    >>>>>>>
                    >>>>>>>Yahoo! Groups Links
                    >>>>>>>
                    >>>>>>>
                    >>>>>>>
                    >>>>>>>
                    >>>>>>>
                    >>>>>>>
                    >>>>>>>
                    >>>>>>
                    >>>>>>--
                    >>>>>>----------------------------------------------------------------
                    >
                    > --
                    >
                    >>>>>>Web: www.homanndesigns.com
                    >>>>>>email: homann@h...
                    >>>>>>Phone: +61 421 601 665
                    >>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                    >>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                    >>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                    >
                    > board
                    >
                    >>>>>
                    >>>>>
                    >>>>>
                    >>>>>
                    >>>>>
                    >>>>>
                    >>>>>
                    >>>>>Yahoo! Groups Links
                    >>>>>
                    >>>>>
                    >>>>>
                    >>>>>
                    >>>>>
                    >>>>>
                    >>>>>
                    >>>>
                    >>>>--
                    >>>>------------------------------------------------------------------
                    >>>>Web: www.homanndesigns.com
                    >>>>email: homann@h...
                    >>>>Phone: +61 421 601 665
                    >>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                    >>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                    >>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                    >>>>
                    >>>
                    >>>
                    >>>
                    >>>
                    >>>
                    >>>
                    >>>
                    >>>
                    >>>
                    >>>Yahoo! Groups Links
                    >>>
                    >>>
                    >>>
                    >>>
                    >>>
                    >>>
                    >>>
                    >>
                    >>--
                    >>------------------------------------------------------------------
                    >>Web: www.homanndesigns.com
                    >>email: homann@...
                    >>Phone: +61 421 601 665
                    >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                    >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                    >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                    >>
                    >
                    >
                    >
                    >
                    >
                    >
                    >
                    >
                    >
                    > Yahoo! Groups Links
                    >
                    >
                    >
                    >
                    >
                    >
                    >
                    >
                    >
                    >

                    --
                    ------------------------------------------------------------------
                    Web: www.homanndesigns.com
                    email: homann@...
                    Phone: +61 421 601 665
                    www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                    www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                    www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                  • Jim Knighton
                    Peter, On the basis of your last post I decided to try the Paypal transfer to homann@homanndesigns.com. Unfortunately, now Paypal says that this account is not
                    Message 9 of 24 , Feb 1, 2006
                    • 0 Attachment
                      Peter,

                      On the basis of your last post I decided to try the Paypal transfer
                      to homann@.... Unfortunately, now Paypal says that this
                      account is not registered with them. Since other guys have posted
                      here that they have purchased from you via PayPal, it appears that
                      either you have payments sent to another address that is registered
                      with them or there is still a problem. On my own from this end I
                      can't discern what is going on...

                      In the various messages that I've sent I've given you my snail mail
                      address (at least twice) and asked for verification of the email
                      address you prefer for Paypal. I've never received anything from you
                      so far to suggest that you've received those messages nor has there
                      been a response to these queries. This latest glitch has me nervous
                      about proceeding without better validation that if I send the money
                      you will actually receive it. I'm in a real quandry here as this
                      forum appears to be the only reliable means for communicating with
                      you.

                      Regards,

                      Jim

                      --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@...> wrote:
                      >
                      > Hi Jim,
                      >
                      > I went to bed after sending the first 2 test messages. I just sent
                      a message
                      > to jimknighton@...
                      >
                      > I am receiving email from all 3 addresses. You don't seem to be
                      getting my
                      > replys sent to jim_knighton@...
                      >
                      > Cheers,
                      >
                      > Peter.
                      >
                      > Jim Knighton wrote:
                      > > Peter,
                      > >
                      > > I don't know if you've sent anything, but there hasn't been any
                      email
                      > > activity on this end for over an hour.
                      > >
                      > > Regards,
                      > >
                      > > Jim
                      > >
                      > >
                      > >
                      > >
                      > > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                      wrote:
                      > >
                      > >>Hi Jim,
                      > >>
                      > >>I am receiving your emails. You are not receiving mine??
                      > >>
                      > >>
                      > >>I just replied to your message from jimknighton@g... hopefully
                      you
                      > >>received my reply.
                      > >>
                      > >>Cheers,
                      > >>
                      > >>Peter.
                      > >>
                      > >>
                      > >>Jim Knighton wrote:
                      > >>
                      > >>>Peter,
                      > >>>
                      > >>>I've sent you several emails now, including one each on the last
                      > >
                      > > two
                      > >
                      > >>>days. It appears that you aren't receiving them. I did get one
                      > >
                      > > email
                      > >
                      > >>>from you a couple of days ago, to which I responded. I don't
                      know
                      > >>>what is going on... With the messages I've sent you I've never
                      > >>>recieved an "undelivered" message, so from all I see it looks
                      > >
                      > > like
                      > >
                      > >>>they are sent and received.
                      > >>>
                      > >>>
                      > >>>I changed my ISP a couple of months ago and also updated my
                      > >
                      > > profile
                      > >
                      > >>>here in Yahoo to reflect that change. Sometimes, however, the
                      old
                      > >>>email address still pops up. I don't know why or how to fix it.
                      > >>>
                      > >>>Will you please confirm your email address and maybe give me an
                      > >>>alternative if you have one?
                      > >>>
                      > >>>Until we get the communications working right it seems a bit
                      > >>>foolhardy to attempt a Paypal transfer although I'm ready and
                      > >
                      > > willing
                      > >
                      > >>>to do so. I don't want to do a transfer only to have it fall
                      into
                      > >
                      > > a
                      > >
                      > >>>black hole somewhere. That could cause all sorts of frustration
                      > >
                      > > on
                      > >
                      > >>>both ends. Please keep in mind that I really want to conclude
                      > >
                      > > this
                      > >
                      > >>>transaction, however.
                      > >>>
                      > >>>So, my "real" email address is the one I gave you earlier:
                      > >>>
                      > >>>jim_knighton@m... (The one message I received from you was sent
                      > >
                      > > to
                      > >
                      > >>>this address)
                      > >>>
                      > >>>my old and defunct address is:
                      > >>>
                      > >>>jimknighton@w... (don't use this one - that account is
                      > >>>dead. If you have it in your address book, please delete it).
                      > >>>
                      > >>>Here are a couple of "emergency backup" addresses we can try as
                      > >
                      > > well:
                      > >
                      > >>>jim_knighton@g...
                      > >>>and
                      > >>>jim_knighton@j...
                      > >>>
                      > >>>I'll make a point of checking these frequently until we get
                      > >
                      > > things
                      > >
                      > >>>sorted out. I've never had this kind of problem before, and I do
                      > >
                      > > a
                      > >
                      > >>>lot of email correspondence with people all around the world.
                      > >
                      > > This is
                      > >
                      > >>>just crazy, and I don't have a clue which end the problem is on.
                      > >>>
                      > >>>Thanks for being persistent and contacting me this way.
                      > >
                      > > Hopefully, no
                      > >
                      > >>>one else is having this problem.
                      > >>>
                      > >>>Anyway, As soon as this posts I'll send you three test messages
                      > >
                      > > from
                      > >
                      > >>>each of the aforementioned active accounts in hopes that
                      > >
                      > > something
                      > >
                      > >>>gets through. If I don't hear back from you "soon" I'll post
                      > >
                      > > another
                      > >
                      > >>>message here to apprise you of that fact. So, here's hoping we
                      > >
                      > > can
                      > >
                      > >>>sort it out.
                      > >>>
                      > >>>Regards,
                      > >>>
                      > >>>Jim
                      > >>>
                      > >>>
                      > >>>
                      > >>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                      > >
                      > > wrote:
                      > >
                      > >>>>Hi Jim,
                      > >>>>
                      > >>>>An email I sent you on the 29th has been undelivered with the
                      > >>>
                      > >>>message;
                      > >>>
                      > >>>
                      > >>>>-------------------------
                      > >>>>This is the Postfix program at host webrdr.connect.com.au.
                      > >>>>
                      > >>>>I'm sorry to have to inform you that the message returned
                      > >>>>below could not be delivered to one or more destinations.
                      > >>>>
                      > >>>>For further assistance, please send mail to <postmaster>
                      > >>>>
                      > >>>>If you do so, please include this problem report. You can
                      > >>>>delete your own text from the message returned below.
                      > >>>>
                      > >>>> The Postfix program
                      > >>>>
                      > >>>><jim_knighton@m...>: connect to mx3.hotmail.com[65.54.244.200]:
                      > >>>
                      > >>>Connection
                      > >>>
                      > >>>
                      > >>>> timed out
                      > >>>>
                      > >>>>---------------------------
                      > >>>>
                      > >>>>I sent you an email this morning. Did you receive it?
                      > >>>>
                      > >>>>Do you have another Enail address I can use?
                      > >>>>
                      > >>>>I can supply the DigiSpeed plus cable. The cost is 71.00
                      > >
                      > > including
                      > >
                      > >>>postage.
                      > >>>
                      > >>>
                      > >>>>I presume it is for installation in a Sherline DC motor
                      > >
                      > > controller
                      > >
                      > >>>housing?
                      > >>>
                      > >>>
                      > >>>>Cheers,
                      > >>>>
                      > >>>>Peter.
                      > >>>>
                      > >>>>
                      > >>>>Jim Knighton wrote:
                      > >>>>
                      > >>>>
                      > >>>>>Hi Peter...
                      > >>>>>
                      > >>>>>I want to buy a Digispeed controller and also the MiniDin
                      cable.
                      > >>>
                      > >>>In
                      > >>>
                      > >>>
                      > >>>>>as much as payment will be via paypal I sent you an email to
                      > >
                      > > this
                      > >
                      > >>>>>effect via the link on your web site. I guess it never went
                      > >>>
                      > >>>through.
                      > >>>
                      > >>>
                      > >>>>>Anyway, it's for a small Sherline lathe with PMDX electronics
                      > >>>
                      > >>>running
                      > >>>
                      > >>>
                      > >>>>>Mach 3 software. I'm assuming that since others are using Mach
                      3
                      > >>>
                      > >>>the
                      > >>>
                      > >>>
                      > >>>>>setup is manageable. My thought was to run the cable (minus
                      one
                      > >>>
                      > >>>end)
                      > >>>
                      > >>>
                      > >>>>>directly to my PMDX breakout board. I'm not sure how to
                      > >
                      > > configure
                      > >
                      > >>>>>Mach, but I suppose I'll sort it out soon enough.
                      > >>>>>
                      > >>>>>Contact me at jim_knighton@m...
                      > >>>>>
                      > >>>>>Regards,
                      > >>>>>
                      > >>>>>Jim
                      > >>>>>
                      > >>>>>
                      > >>>>>
                      > >>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                      > >>>
                      > >>>wrote:
                      > >>>
                      > >>>
                      > >>>>>>Hi Jim,
                      > >>>>>>
                      > >>>>>>I'm here. Don't recall seeing an email from you.
                      > >>>>>>
                      > >>>>>>How can I help.
                      > >>>>>>
                      > >>>>>>Cheers,
                      > >>>>>>
                      > >>>>>>
                      > >>>>>>Peter.
                      > >>>>>>
                      > >>>>>>
                      > >>>>>>Jim Knighton wrote:
                      > >>>>>>
                      > >>>>>>
                      > >>>>>>
                      > >>>>>>>Is there a US source for Peter Homann's Digispeed
                      controller?
                      > >>>>>
                      > >>>>>I've
                      > >>>>>
                      > >>>>>
                      > >>>>>
                      > >>>>>>>tried contacting him (last week) directly via his web site
                      but
                      > >>>
                      > >>>so
                      > >>>
                      > >>>
                      > >>>>>far
                      > >>>>>
                      > >>>>>
                      > >>>>>
                      > >>>>>>>there hasn't been a response. Any thoughts?
                      > >>>>>>>
                      > >>>>>>>Regards,
                      > >>>>>>>
                      > >>>>>>>Jim
                      > >>>>>>>
                      > >>>>>>>
                      > >>>>>>>
                      > >>>>>>>
                      > >>>>>>>
                      > >>>>>>>
                      > >>>>>>>
                      > >>>>>>>
                      > >>>>>>>Yahoo! Groups Links
                      > >>>>>>>
                      > >>>>>>>
                      > >>>>>>>
                      > >>>>>>>
                      > >>>>>>>
                      > >>>>>>>
                      > >>>>>>>
                      > >>>>>>
                      > >>>>>>--
                      > >>>>>>--------------------------------------------------------------
                      --
                      > >
                      > > --
                      > >
                      > >>>>>>Web: www.homanndesigns.com
                      > >>>>>>email: homann@h...
                      > >>>>>>Phone: +61 421 601 665
                      > >>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface
                      Unit
                      > >>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                      > >>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                      > >
                      > > board
                      > >
                      > >>>>>
                      > >>>>>
                      > >>>>>
                      > >>>>>
                      > >>>>>
                      > >>>>>
                      > >>>>>
                      > >>>>>Yahoo! Groups Links
                      > >>>>>
                      > >>>>>
                      > >>>>>
                      > >>>>>
                      > >>>>>
                      > >>>>>
                      > >>>>>
                      > >>>>
                      > >>>>--
                      > >>>>----------------------------------------------------------------
                      --
                      > >>>>Web: www.homanndesigns.com
                      > >>>>email: homann@h...
                      > >>>>Phone: +61 421 601 665
                      > >>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                      > >>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                      > >>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                      board
                      > >>>>
                      > >>>
                      > >>>
                      > >>>
                      > >>>
                      > >>>
                      > >>>
                      > >>>
                      > >>>
                      > >>>
                      > >>>Yahoo! Groups Links
                      > >>>
                      > >>>
                      > >>>
                      > >>>
                      > >>>
                      > >>>
                      > >>>
                      > >>
                      > >>--
                      > >>------------------------------------------------------------------
                      > >>Web: www.homanndesigns.com
                      > >>email: homann@h...
                      > >>Phone: +61 421 601 665
                      > >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                      > >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                      > >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                      > >>
                      > >
                      > >
                      > >
                      > >
                      > >
                      > >
                      > >
                      > >
                      > > Yahoo! Groups Links
                      > >
                      > >
                      > >
                      > >
                      > >
                      > >
                      > >
                      > >
                      > >
                      > >
                      >
                      > --
                      > ------------------------------------------------------------------
                      > Web: www.homanndesigns.com
                      > email: homann@...
                      > Phone: +61 421 601 665
                      > www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                      > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                      > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                      >
                    • Peter Homann
                      Jim, When it rains it pours. On the 1st Fed, Paypal switched all the accounts held by Australians to Paypal Australia. I m assuming they were forced to by the
                      Message 10 of 24 , Feb 1, 2006
                      • 0 Attachment
                        Jim,

                        When it rains it pours. On the 1st Fed, Paypal switched all the accounts held
                        by Australians to Paypal Australia. I'm assuming they were forced to by the
                        Australian Government for tax tracking purposes.

                        Maybe there is a glitch in their system. The address homann@...
                        is correct for Paypal transfers.

                        I'd give it another go.

                        Or, what about this, I'll send you the DigiSpeed (Sherline version) plus the
                        MiniDin cable. When you receive it, pay me then. By that time, Paypal and
                        other problems may have sorted themselves out.

                        Did you receive my test messages sent just over an hour ago?

                        Cheers,

                        Peter.

                        Jim Knighton wrote:
                        > Peter,
                        >
                        > On the basis of your last post I decided to try the Paypal transfer
                        > to homann@.... Unfortunately, now Paypal says that this
                        > account is not registered with them. Since other guys have posted
                        > here that they have purchased from you via PayPal, it appears that
                        > either you have payments sent to another address that is registered
                        > with them or there is still a problem. On my own from this end I
                        > can't discern what is going on...
                        >
                        > In the various messages that I've sent I've given you my snail mail
                        > address (at least twice) and asked for verification of the email
                        > address you prefer for Paypal. I've never received anything from you
                        > so far to suggest that you've received those messages nor has there
                        > been a response to these queries. This latest glitch has me nervous
                        > about proceeding without better validation that if I send the money
                        > you will actually receive it. I'm in a real quandry here as this
                        > forum appears to be the only reliable means for communicating with
                        > you.
                        >
                        > Regards,
                        >
                        > Jim
                        >
                        > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@...> wrote:
                        >
                        >>Hi Jim,
                        >>
                        >>I went to bed after sending the first 2 test messages. I just sent
                        >
                        > a message
                        >
                        >>to jimknighton@...
                        >>
                        >>I am receiving email from all 3 addresses. You don't seem to be
                        >
                        > getting my
                        >
                        >>replys sent to jim_knighton@...
                        >>
                        >>Cheers,
                        >>
                        >>Peter.
                        >>
                        >>Jim Knighton wrote:
                        >>
                        >>>Peter,
                        >>>
                        >>>I don't know if you've sent anything, but there hasn't been any
                        >
                        > email
                        >
                        >>>activity on this end for over an hour.
                        >>>
                        >>>Regards,
                        >>>
                        >>>Jim
                        >>>
                        >>>
                        >>>
                        >>>
                        >>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                        >
                        > wrote:
                        >
                        >>>>Hi Jim,
                        >>>>
                        >>>>I am receiving your emails. You are not receiving mine??
                        >>>>
                        >>>>
                        >>>>I just replied to your message from jimknighton@g... hopefully
                        >
                        > you
                        >
                        >>>>received my reply.
                        >>>>
                        >>>>Cheers,
                        >>>>
                        >>>>Peter.
                        >>>>
                        >>>>
                        >>>>Jim Knighton wrote:
                        >>>>
                        >>>>
                        >>>>>Peter,
                        >>>>>
                        >>>>>I've sent you several emails now, including one each on the last
                        >>>
                        >>>two
                        >>>
                        >>>
                        >>>>>days. It appears that you aren't receiving them. I did get one
                        >>>
                        >>>email
                        >>>
                        >>>
                        >>>>>from you a couple of days ago, to which I responded. I don't
                        >
                        > know
                        >
                        >>>>>what is going on... With the messages I've sent you I've never
                        >>>>>recieved an "undelivered" message, so from all I see it looks
                        >>>
                        >>>like
                        >>>
                        >>>
                        >>>>>they are sent and received.
                        >>>>>
                        >>>>>
                        >>>>>I changed my ISP a couple of months ago and also updated my
                        >>>
                        >>>profile
                        >>>
                        >>>
                        >>>>>here in Yahoo to reflect that change. Sometimes, however, the
                        >
                        > old
                        >
                        >>>>>email address still pops up. I don't know why or how to fix it.
                        >>>>>
                        >>>>>Will you please confirm your email address and maybe give me an
                        >>>>>alternative if you have one?
                        >>>>>
                        >>>>>Until we get the communications working right it seems a bit
                        >>>>>foolhardy to attempt a Paypal transfer although I'm ready and
                        >>>
                        >>>willing
                        >>>
                        >>>
                        >>>>>to do so. I don't want to do a transfer only to have it fall
                        >
                        > into
                        >
                        >>>a
                        >>>
                        >>>
                        >>>>>black hole somewhere. That could cause all sorts of frustration
                        >>>
                        >>>on
                        >>>
                        >>>
                        >>>>>both ends. Please keep in mind that I really want to conclude
                        >>>
                        >>>this
                        >>>
                        >>>
                        >>>>>transaction, however.
                        >>>>>
                        >>>>>So, my "real" email address is the one I gave you earlier:
                        >>>>>
                        >>>>>jim_knighton@m... (The one message I received from you was sent
                        >>>
                        >>>to
                        >>>
                        >>>
                        >>>>>this address)
                        >>>>>
                        >>>>>my old and defunct address is:
                        >>>>>
                        >>>>>jimknighton@w... (don't use this one - that account is
                        >>>>>dead. If you have it in your address book, please delete it).
                        >>>>>
                        >>>>>Here are a couple of "emergency backup" addresses we can try as
                        >>>
                        >>>well:
                        >>>
                        >>>
                        >>>>>jim_knighton@g...
                        >>>>>and
                        >>>>>jim_knighton@j...
                        >>>>>
                        >>>>>I'll make a point of checking these frequently until we get
                        >>>
                        >>>things
                        >>>
                        >>>
                        >>>>>sorted out. I've never had this kind of problem before, and I do
                        >>>
                        >>>a
                        >>>
                        >>>
                        >>>>>lot of email correspondence with people all around the world.
                        >>>
                        >>>This is
                        >>>
                        >>>
                        >>>>>just crazy, and I don't have a clue which end the problem is on.
                        >>>>>
                        >>>>>Thanks for being persistent and contacting me this way.
                        >>>
                        >>>Hopefully, no
                        >>>
                        >>>
                        >>>>>one else is having this problem.
                        >>>>>
                        >>>>>Anyway, As soon as this posts I'll send you three test messages
                        >>>
                        >>>from
                        >>>
                        >>>
                        >>>>>each of the aforementioned active accounts in hopes that
                        >>>
                        >>>something
                        >>>
                        >>>
                        >>>>>gets through. If I don't hear back from you "soon" I'll post
                        >>>
                        >>>another
                        >>>
                        >>>
                        >>>>>message here to apprise you of that fact. So, here's hoping we
                        >>>
                        >>>can
                        >>>
                        >>>
                        >>>>>sort it out.
                        >>>>>
                        >>>>>Regards,
                        >>>>>
                        >>>>>Jim
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                        >>>
                        >>>wrote:
                        >>>
                        >>>
                        >>>>>>Hi Jim,
                        >>>>>>
                        >>>>>>An email I sent you on the 29th has been undelivered with the
                        >>>>>
                        >>>>>message;
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>>-------------------------
                        >>>>>>This is the Postfix program at host webrdr.connect.com.au.
                        >>>>>>
                        >>>>>>I'm sorry to have to inform you that the message returned
                        >>>>>>below could not be delivered to one or more destinations.
                        >>>>>>
                        >>>>>>For further assistance, please send mail to <postmaster>
                        >>>>>>
                        >>>>>>If you do so, please include this problem report. You can
                        >>>>>>delete your own text from the message returned below.
                        >>>>>>
                        >>>>>> The Postfix program
                        >>>>>>
                        >>>>>><jim_knighton@m...>: connect to mx3.hotmail.com[65.54.244.200]:
                        >>>>>
                        >>>>>Connection
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>> timed out
                        >>>>>>
                        >>>>>>---------------------------
                        >>>>>>
                        >>>>>>I sent you an email this morning. Did you receive it?
                        >>>>>>
                        >>>>>>Do you have another Enail address I can use?
                        >>>>>>
                        >>>>>>I can supply the DigiSpeed plus cable. The cost is 71.00
                        >>>
                        >>>including
                        >>>
                        >>>
                        >>>>>postage.
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>>I presume it is for installation in a Sherline DC motor
                        >>>
                        >>>controller
                        >>>
                        >>>
                        >>>>>housing?
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>>Cheers,
                        >>>>>>
                        >>>>>>Peter.
                        >>>>>>
                        >>>>>>
                        >>>>>>Jim Knighton wrote:
                        >>>>>>
                        >>>>>>
                        >>>>>>
                        >>>>>>>Hi Peter...
                        >>>>>>>
                        >>>>>>>I want to buy a Digispeed controller and also the MiniDin
                        >
                        > cable.
                        >
                        >>>>>In
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>>>as much as payment will be via paypal I sent you an email to
                        >>>
                        >>>this
                        >>>
                        >>>
                        >>>>>>>effect via the link on your web site. I guess it never went
                        >>>>>
                        >>>>>through.
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>>>Anyway, it's for a small Sherline lathe with PMDX electronics
                        >>>>>
                        >>>>>running
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>>>Mach 3 software. I'm assuming that since others are using Mach
                        >
                        > 3
                        >
                        >>>>>the
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>>>setup is manageable. My thought was to run the cable (minus
                        >
                        > one
                        >
                        >>>>>end)
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>>>directly to my PMDX breakout board. I'm not sure how to
                        >>>
                        >>>configure
                        >>>
                        >>>
                        >>>>>>>Mach, but I suppose I'll sort it out soon enough.
                        >>>>>>>
                        >>>>>>>Contact me at jim_knighton@m...
                        >>>>>>>
                        >>>>>>>Regards,
                        >>>>>>>
                        >>>>>>>Jim
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                        >>>>>
                        >>>>>wrote:
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>>>>Hi Jim,
                        >>>>>>>>
                        >>>>>>>>I'm here. Don't recall seeing an email from you.
                        >>>>>>>>
                        >>>>>>>>How can I help.
                        >>>>>>>>
                        >>>>>>>>Cheers,
                        >>>>>>>>
                        >>>>>>>>
                        >>>>>>>>Peter.
                        >>>>>>>>
                        >>>>>>>>
                        >>>>>>>>Jim Knighton wrote:
                        >>>>>>>>
                        >>>>>>>>
                        >>>>>>>>
                        >>>>>>>>
                        >>>>>>>>>Is there a US source for Peter Homann's Digispeed
                        >
                        > controller?
                        >
                        >>>>>>>I've
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>>>tried contacting him (last week) directly via his web site
                        >
                        > but
                        >
                        >>>>>so
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>>>far
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>>>there hasn't been a response. Any thoughts?
                        >>>>>>>>>
                        >>>>>>>>>Regards,
                        >>>>>>>>>
                        >>>>>>>>>Jim
                        >>>>>>>>>
                        >>>>>>>>>
                        >>>>>>>>>
                        >>>>>>>>>
                        >>>>>>>>>
                        >>>>>>>>>
                        >>>>>>>>>
                        >>>>>>>>>
                        >>>>>>>>>Yahoo! Groups Links
                        >>>>>>>>>
                        >>>>>>>>>
                        >>>>>>>>>
                        >>>>>>>>>
                        >>>>>>>>>
                        >>>>>>>>>
                        >>>>>>>>>
                        >>>>>>>>
                        >>>>>>>>--
                        >>>>>>>>--------------------------------------------------------------
                        >
                        > --
                        >
                        >>>--
                        >>>
                        >>>
                        >>>>>>>>Web: www.homanndesigns.com
                        >>>>>>>>email: homann@h...
                        >>>>>>>>Phone: +61 421 601 665
                        >>>>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface
                        >
                        > Unit
                        >
                        >>>>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                        >>>>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                        >>>
                        >>>board
                        >>>
                        >>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>Yahoo! Groups Links
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>>
                        >>>>>>
                        >>>>>>--
                        >>>>>>----------------------------------------------------------------
                        >
                        > --
                        >
                        >>>>>>Web: www.homanndesigns.com
                        >>>>>>email: homann@h...
                        >>>>>>Phone: +61 421 601 665
                        >>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                        >>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                        >>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                        >
                        > board
                        >
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>Yahoo! Groups Links
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>>
                        >>>>
                        >>>>--
                        >>>>------------------------------------------------------------------
                        >>>>Web: www.homanndesigns.com
                        >>>>email: homann@h...
                        >>>>Phone: +61 421 601 665
                        >>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                        >>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                        >>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                        >>>>
                        >>>
                        >>>
                        >>>
                        >>>
                        >>>
                        >>>
                        >>>
                        >>>
                        >>>Yahoo! Groups Links
                        >>>
                        >>>
                        >>>
                        >>>
                        >>>
                        >>>
                        >>>
                        >>>
                        >>>
                        >>>
                        >>
                        >>--
                        >>------------------------------------------------------------------
                        >>Web: www.homanndesigns.com
                        >>email: homann@...
                        >>Phone: +61 421 601 665
                        >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                        >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                        >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                        >>
                        >
                        >
                        >
                        >
                        >
                        >
                        >
                        >
                        >
                        > Yahoo! Groups Links
                        >
                        >
                        >
                        >
                        >
                        >
                        >

                        --
                        ------------------------------------------------------------------
                        Web: www.homanndesigns.com
                        email: homann@...
                        Phone: +61 421 601 665
                        www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                        www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                        www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                      • Jim Knighton
                        Peter, I ve not received any email from you all day except one message that crossed my earlier post in the forum. I ve received email from Alaska, Israel, and
                        Message 11 of 24 , Feb 1, 2006
                        • 0 Attachment
                          Peter,

                          I've not received any email from you all day except one message that
                          crossed my earlier post in the forum. I've received email from
                          Alaska, Israel, and elsewhere in the US on both msn and gmail
                          accounts. Nothing from you recently, however.

                          I'm nervous as hell about it, but I guess I'll try the PayPal
                          transfer and hope for the best. I'll post a message here when I'm
                          finished. Please let me know right away if you receive it.

                          Regards,

                          Jim


                          --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@...> wrote:
                          >
                          > Jim,
                          >
                          > When it rains it pours. On the 1st Fed, Paypal switched all the
                          accounts held
                          > by Australians to Paypal Australia. I'm assuming they were forced
                          to by the
                          > Australian Government for tax tracking purposes.
                          >
                          > Maybe there is a glitch in their system. The address homann@...
                          > is correct for Paypal transfers.
                          >
                          > I'd give it another go.
                          >
                          > Or, what about this, I'll send you the DigiSpeed (Sherline version)
                          plus the
                          > MiniDin cable. When you receive it, pay me then. By that time,
                          Paypal and
                          > other problems may have sorted themselves out.
                          >
                          > Did you receive my test messages sent just over an hour ago?
                          >
                          > Cheers,
                          >
                          > Peter.
                          >
                          > Jim Knighton wrote:
                          > > Peter,
                          > >
                          > > On the basis of your last post I decided to try the Paypal
                          transfer
                          > > to homann@... Unfortunately, now Paypal says that this
                          > > account is not registered with them. Since other guys have posted
                          > > here that they have purchased from you via PayPal, it appears
                          that
                          > > either you have payments sent to another address that is
                          registered
                          > > with them or there is still a problem. On my own from this end I
                          > > can't discern what is going on...
                          > >
                          > > In the various messages that I've sent I've given you my snail
                          mail
                          > > address (at least twice) and asked for verification of the email
                          > > address you prefer for Paypal. I've never received anything from
                          you
                          > > so far to suggest that you've received those messages nor has
                          there
                          > > been a response to these queries. This latest glitch has me
                          nervous
                          > > about proceeding without better validation that if I send the
                          money
                          > > you will actually receive it. I'm in a real quandry here as this
                          > > forum appears to be the only reliable means for communicating
                          with
                          > > you.
                          > >
                          > > Regards,
                          > >
                          > > Jim
                          > >
                          > > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@> wrote:
                          > >
                          > >>Hi Jim,
                          > >>
                          > >>I went to bed after sending the first 2 test messages. I just
                          sent
                          > >
                          > > a message
                          > >
                          > >>to jimknighton@
                          > >>
                          > >>I am receiving email from all 3 addresses. You don't seem to be
                          > >
                          > > getting my
                          > >
                          > >>replys sent to jim_knighton@
                          > >>
                          > >>Cheers,
                          > >>
                          > >>Peter.
                          > >>
                          > >>Jim Knighton wrote:
                          > >>
                          > >>>Peter,
                          > >>>
                          > >>>I don't know if you've sent anything, but there hasn't been any
                          > >
                          > > email
                          > >
                          > >>>activity on this end for over an hour.
                          > >>>
                          > >>>Regards,
                          > >>>
                          > >>>Jim
                          > >>>
                          > >>>
                          > >>>
                          > >>>
                          > >>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                          > >
                          > > wrote:
                          > >
                          > >>>>Hi Jim,
                          > >>>>
                          > >>>>I am receiving your emails. You are not receiving mine??
                          > >>>>
                          > >>>>
                          > >>>>I just replied to your message from jimknighton@g... hopefully
                          > >
                          > > you
                          > >
                          > >>>>received my reply.
                          > >>>>
                          > >>>>Cheers,
                          > >>>>
                          > >>>>Peter.
                          > >>>>
                          > >>>>
                          > >>>>Jim Knighton wrote:
                          > >>>>
                          > >>>>
                          > >>>>>Peter,
                          > >>>>>
                          > >>>>>I've sent you several emails now, including one each on the
                          last
                          > >>>
                          > >>>two
                          > >>>
                          > >>>
                          > >>>>>days. It appears that you aren't receiving them. I did get one
                          > >>>
                          > >>>email
                          > >>>
                          > >>>
                          > >>>>>from you a couple of days ago, to which I responded. I don't
                          > >
                          > > know
                          > >
                          > >>>>>what is going on... With the messages I've sent you I've never
                          > >>>>>recieved an "undelivered" message, so from all I see it looks
                          > >>>
                          > >>>like
                          > >>>
                          > >>>
                          > >>>>>they are sent and received.
                          > >>>>>
                          > >>>>>
                          > >>>>>I changed my ISP a couple of months ago and also updated my
                          > >>>
                          > >>>profile
                          > >>>
                          > >>>
                          > >>>>>here in Yahoo to reflect that change. Sometimes, however, the
                          > >
                          > > old
                          > >
                          > >>>>>email address still pops up. I don't know why or how to fix
                          it.
                          > >>>>>
                          > >>>>>Will you please confirm your email address and maybe give me
                          an
                          > >>>>>alternative if you have one?
                          > >>>>>
                          > >>>>>Until we get the communications working right it seems a bit
                          > >>>>>foolhardy to attempt a Paypal transfer although I'm ready and
                          > >>>
                          > >>>willing
                          > >>>
                          > >>>
                          > >>>>>to do so. I don't want to do a transfer only to have it fall
                          > >
                          > > into
                          > >
                          > >>>a
                          > >>>
                          > >>>
                          > >>>>>black hole somewhere. That could cause all sorts of
                          frustration
                          > >>>
                          > >>>on
                          > >>>
                          > >>>
                          > >>>>>both ends. Please keep in mind that I really want to conclude
                          > >>>
                          > >>>this
                          > >>>
                          > >>>
                          > >>>>>transaction, however.
                          > >>>>>
                          > >>>>>So, my "real" email address is the one I gave you earlier:
                          > >>>>>
                          > >>>>>jim_knighton@m... (The one message I received from you was
                          sent
                          > >>>
                          > >>>to
                          > >>>
                          > >>>
                          > >>>>>this address)
                          > >>>>>
                          > >>>>>my old and defunct address is:
                          > >>>>>
                          > >>>>>jimknighton@w... (don't use this one - that account is
                          > >>>>>dead. If you have it in your address book, please delete it).
                          > >>>>>
                          > >>>>>Here are a couple of "emergency backup" addresses we can try
                          as
                          > >>>
                          > >>>well:
                          > >>>
                          > >>>
                          > >>>>>jim_knighton@g...
                          > >>>>>and
                          > >>>>>jim_knighton@j...
                          > >>>>>
                          > >>>>>I'll make a point of checking these frequently until we get
                          > >>>
                          > >>>things
                          > >>>
                          > >>>
                          > >>>>>sorted out. I've never had this kind of problem before, and I
                          do
                          > >>>
                          > >>>a
                          > >>>
                          > >>>
                          > >>>>>lot of email correspondence with people all around the world.
                          > >>>
                          > >>>This is
                          > >>>
                          > >>>
                          > >>>>>just crazy, and I don't have a clue which end the problem is
                          on.
                          > >>>>>
                          > >>>>>Thanks for being persistent and contacting me this way.
                          > >>>
                          > >>>Hopefully, no
                          > >>>
                          > >>>
                          > >>>>>one else is having this problem.
                          > >>>>>
                          > >>>>>Anyway, As soon as this posts I'll send you three test
                          messages
                          > >>>
                          > >>>from
                          > >>>
                          > >>>
                          > >>>>>each of the aforementioned active accounts in hopes that
                          > >>>
                          > >>>something
                          > >>>
                          > >>>
                          > >>>>>gets through. If I don't hear back from you "soon" I'll post
                          > >>>
                          > >>>another
                          > >>>
                          > >>>
                          > >>>>>message here to apprise you of that fact. So, here's hoping we
                          > >>>
                          > >>>can
                          > >>>
                          > >>>
                          > >>>>>sort it out.
                          > >>>>>
                          > >>>>>Regards,
                          > >>>>>
                          > >>>>>Jim
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                          > >>>
                          > >>>wrote:
                          > >>>
                          > >>>
                          > >>>>>>Hi Jim,
                          > >>>>>>
                          > >>>>>>An email I sent you on the 29th has been undelivered with the
                          > >>>>>
                          > >>>>>message;
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>>-------------------------
                          > >>>>>>This is the Postfix program at host webrdr.connect.com.au.
                          > >>>>>>
                          > >>>>>>I'm sorry to have to inform you that the message returned
                          > >>>>>>below could not be delivered to one or more destinations.
                          > >>>>>>
                          > >>>>>>For further assistance, please send mail to <postmaster>
                          > >>>>>>
                          > >>>>>>If you do so, please include this problem report. You can
                          > >>>>>>delete your own text from the message returned below.
                          > >>>>>>
                          > >>>>>> The Postfix program
                          > >>>>>>
                          > >>>>>><jim_knighton@m...>: connect to mx3.hotmail.com
                          [65.54.244.200]:
                          > >>>>>
                          > >>>>>Connection
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>> timed out
                          > >>>>>>
                          > >>>>>>---------------------------
                          > >>>>>>
                          > >>>>>>I sent you an email this morning. Did you receive it?
                          > >>>>>>
                          > >>>>>>Do you have another Enail address I can use?
                          > >>>>>>
                          > >>>>>>I can supply the DigiSpeed plus cable. The cost is 71.00
                          > >>>
                          > >>>including
                          > >>>
                          > >>>
                          > >>>>>postage.
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>>I presume it is for installation in a Sherline DC motor
                          > >>>
                          > >>>controller
                          > >>>
                          > >>>
                          > >>>>>housing?
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>>Cheers,
                          > >>>>>>
                          > >>>>>>Peter.
                          > >>>>>>
                          > >>>>>>
                          > >>>>>>Jim Knighton wrote:
                          > >>>>>>
                          > >>>>>>
                          > >>>>>>
                          > >>>>>>>Hi Peter...
                          > >>>>>>>
                          > >>>>>>>I want to buy a Digispeed controller and also the MiniDin
                          > >
                          > > cable.
                          > >
                          > >>>>>In
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>>>as much as payment will be via paypal I sent you an email to
                          > >>>
                          > >>>this
                          > >>>
                          > >>>
                          > >>>>>>>effect via the link on your web site. I guess it never went
                          > >>>>>
                          > >>>>>through.
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>>>Anyway, it's for a small Sherline lathe with PMDX
                          electronics
                          > >>>>>
                          > >>>>>running
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>>>Mach 3 software. I'm assuming that since others are using
                          Mach
                          > >
                          > > 3
                          > >
                          > >>>>>the
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>>>setup is manageable. My thought was to run the cable (minus
                          > >
                          > > one
                          > >
                          > >>>>>end)
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>>>directly to my PMDX breakout board. I'm not sure how to
                          > >>>
                          > >>>configure
                          > >>>
                          > >>>
                          > >>>>>>>Mach, but I suppose I'll sort it out soon enough.
                          > >>>>>>>
                          > >>>>>>>Contact me at jim_knighton@m...
                          > >>>>>>>
                          > >>>>>>>Regards,
                          > >>>>>>>
                          > >>>>>>>Jim
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann
                          <groups@h...>
                          > >>>>>
                          > >>>>>wrote:
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>>>>Hi Jim,
                          > >>>>>>>>
                          > >>>>>>>>I'm here. Don't recall seeing an email from you.
                          > >>>>>>>>
                          > >>>>>>>>How can I help.
                          > >>>>>>>>
                          > >>>>>>>>Cheers,
                          > >>>>>>>>
                          > >>>>>>>>
                          > >>>>>>>>Peter.
                          > >>>>>>>>
                          > >>>>>>>>
                          > >>>>>>>>Jim Knighton wrote:
                          > >>>>>>>>
                          > >>>>>>>>
                          > >>>>>>>>
                          > >>>>>>>>
                          > >>>>>>>>>Is there a US source for Peter Homann's Digispeed
                          > >
                          > > controller?
                          > >
                          > >>>>>>>I've
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>>>tried contacting him (last week) directly via his web site
                          > >
                          > > but
                          > >
                          > >>>>>so
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>>>far
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>>>there hasn't been a response. Any thoughts?
                          > >>>>>>>>>
                          > >>>>>>>>>Regards,
                          > >>>>>>>>>
                          > >>>>>>>>>Jim
                          > >>>>>>>>>
                          > >>>>>>>>>
                          > >>>>>>>>>
                          > >>>>>>>>>
                          > >>>>>>>>>
                          > >>>>>>>>>
                          > >>>>>>>>>
                          > >>>>>>>>>
                          > >>>>>>>>>Yahoo! Groups Links
                          > >>>>>>>>>
                          > >>>>>>>>>
                          > >>>>>>>>>
                          > >>>>>>>>>
                          > >>>>>>>>>
                          > >>>>>>>>>
                          > >>>>>>>>>
                          > >>>>>>>>
                          > >>>>>>>>--
                          > >>>>>>>>------------------------------------------------------------
                          --
                          > >
                          > > --
                          > >
                          > >>>--
                          > >>>
                          > >>>
                          > >>>>>>>>Web: www.homanndesigns.com
                          > >>>>>>>>email: homann@h...
                          > >>>>>>>>Phone: +61 421 601 665
                          > >>>>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface
                          > >
                          > > Unit
                          > >
                          > >>>>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle
                          control
                          > >>>>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill
                          Upgrade
                          > >>>
                          > >>>board
                          > >>>
                          > >>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>Yahoo! Groups Links
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>>
                          > >>>>>>
                          > >>>>>>--
                          > >>>>>>--------------------------------------------------------------
                          --
                          > >
                          > > --
                          > >
                          > >>>>>>Web: www.homanndesigns.com
                          > >>>>>>email: homann@h...
                          > >>>>>>Phone: +61 421 601 665
                          > >>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface
                          Unit
                          > >>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                          > >>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                          > >
                          > > board
                          > >
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>Yahoo! Groups Links
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>>
                          > >>>>
                          > >>>>--
                          > >>>>----------------------------------------------------------------
                          --
                          > >>>>Web: www.homanndesigns.com
                          > >>>>email: homann@h...
                          > >>>>Phone: +61 421 601 665
                          > >>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                          > >>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                          > >>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                          board
                          > >>>>
                          > >>>
                          > >>>
                          > >>>
                          > >>>
                          > >>>
                          > >>>
                          > >>>
                          > >>>
                          > >>>Yahoo! Groups Links
                          > >>>
                          > >>>
                          > >>>
                          > >>>
                          > >>>
                          > >>>
                          > >>>
                          > >>>
                          > >>>
                          > >>>
                          > >>
                          > >>--
                          > >>------------------------------------------------------------------
                          > >>Web: www.homanndesigns.com
                          > >>email: homann@
                          > >>Phone: +61 421 601 665
                          > >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                          > >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                          > >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                          > >>
                          > >
                          > >
                          > >
                          > >
                          > >
                          > >
                          > >
                          > >
                          > >
                          > > Yahoo! Groups Links
                          > >
                          > >
                          > >
                          > >
                          > >
                          > >
                          > >
                          >
                          > --
                          > ------------------------------------------------------------------
                          > Web: www.homanndesigns.com
                          > email: homann@...
                          > Phone: +61 421 601 665
                          > www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                          > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                          > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                          >
                        • Peter Homann
                          Hi Jim, Yes, I have received a Paypal payment from you. Don t know what is going on with the mail though?? Cheers, Peter. ... -- ... Web:
                          Message 12 of 24 , Feb 1, 2006
                          • 0 Attachment
                            Hi Jim,

                            Yes, I have received a Paypal payment from you.

                            Don't know what is going on with the mail though??

                            Cheers,

                            Peter.

                            Jim Knighton wrote:
                            > Peter,
                            >
                            > I've not received any email from you all day except one message that
                            > crossed my earlier post in the forum. I've received email from
                            > Alaska, Israel, and elsewhere in the US on both msn and gmail
                            > accounts. Nothing from you recently, however.
                            >
                            > I'm nervous as hell about it, but I guess I'll try the PayPal
                            > transfer and hope for the best. I'll post a message here when I'm
                            > finished. Please let me know right away if you receive it.
                            >
                            > Regards,
                            >
                            > Jim
                            >
                            >
                            > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@...> wrote:
                            >
                            >>Jim,
                            >>
                            >>When it rains it pours. On the 1st Fed, Paypal switched all the
                            >
                            > accounts held
                            >
                            >>by Australians to Paypal Australia. I'm assuming they were forced
                            >
                            > to by the
                            >
                            >>Australian Government for tax tracking purposes.
                            >>
                            >>Maybe there is a glitch in their system. The address homann@...
                            >>is correct for Paypal transfers.
                            >>
                            >>I'd give it another go.
                            >>
                            >>Or, what about this, I'll send you the DigiSpeed (Sherline version)
                            >
                            > plus the
                            >
                            >>MiniDin cable. When you receive it, pay me then. By that time,
                            >
                            > Paypal and
                            >
                            >>other problems may have sorted themselves out.
                            >>
                            >>Did you receive my test messages sent just over an hour ago?
                            >>
                            >>Cheers,
                            >>
                            >>Peter.
                            >>
                            >>Jim Knighton wrote:
                            >>
                            >>>Peter,
                            >>>
                            >>>On the basis of your last post I decided to try the Paypal
                            >
                            > transfer
                            >
                            >>>to homann@... Unfortunately, now Paypal says that this
                            >>>account is not registered with them. Since other guys have posted
                            >>>here that they have purchased from you via PayPal, it appears
                            >
                            > that
                            >
                            >>>either you have payments sent to another address that is
                            >
                            > registered
                            >
                            >>>with them or there is still a problem. On my own from this end I
                            >>>can't discern what is going on...
                            >>>
                            >>>In the various messages that I've sent I've given you my snail
                            >
                            > mail
                            >
                            >>>address (at least twice) and asked for verification of the email
                            >>>address you prefer for Paypal. I've never received anything from
                            >
                            > you
                            >
                            >>>so far to suggest that you've received those messages nor has
                            >
                            > there
                            >
                            >>>been a response to these queries. This latest glitch has me
                            >
                            > nervous
                            >
                            >>>about proceeding without better validation that if I send the
                            >
                            > money
                            >
                            >>>you will actually receive it. I'm in a real quandry here as this
                            >>>forum appears to be the only reliable means for communicating
                            >
                            > with
                            >
                            >>>you.
                            >>>
                            >>>Regards,
                            >>>
                            >>>Jim
                            >>>
                            >>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@> wrote:
                            >>>
                            >>>
                            >>>>Hi Jim,
                            >>>>
                            >>>>I went to bed after sending the first 2 test messages. I just
                            >
                            > sent
                            >
                            >>>a message
                            >>>
                            >>>
                            >>>>to jimknighton@
                            >>>>
                            >>>>I am receiving email from all 3 addresses. You don't seem to be
                            >>>
                            >>>getting my
                            >>>
                            >>>
                            >>>>replys sent to jim_knighton@
                            >>>>
                            >>>>Cheers,
                            >>>>
                            >>>>Peter.
                            >>>>
                            >>>>Jim Knighton wrote:
                            >>>>
                            >>>>
                            >>>>>Peter,
                            >>>>>
                            >>>>>I don't know if you've sent anything, but there hasn't been any
                            >>>
                            >>>email
                            >>>
                            >>>
                            >>>>>activity on this end for over an hour.
                            >>>>>
                            >>>>>Regards,
                            >>>>>
                            >>>>>Jim
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                            >>>
                            >>>wrote:
                            >>>
                            >>>
                            >>>>>>Hi Jim,
                            >>>>>>
                            >>>>>>I am receiving your emails. You are not receiving mine??
                            >>>>>>
                            >>>>>>
                            >>>>>>I just replied to your message from jimknighton@g... hopefully
                            >>>
                            >>>you
                            >>>
                            >>>
                            >>>>>>received my reply.
                            >>>>>>
                            >>>>>>Cheers,
                            >>>>>>
                            >>>>>>Peter.
                            >>>>>>
                            >>>>>>
                            >>>>>>Jim Knighton wrote:
                            >>>>>>
                            >>>>>>
                            >>>>>>
                            >>>>>>>Peter,
                            >>>>>>>
                            >>>>>>>I've sent you several emails now, including one each on the
                            >
                            > last
                            >
                            >>>>>two
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>days. It appears that you aren't receiving them. I did get one
                            >>>>>
                            >>>>>email
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>from you a couple of days ago, to which I responded. I don't
                            >>>
                            >>>know
                            >>>
                            >>>
                            >>>>>>>what is going on... With the messages I've sent you I've never
                            >>>>>>>recieved an "undelivered" message, so from all I see it looks
                            >>>>>
                            >>>>>like
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>they are sent and received.
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>I changed my ISP a couple of months ago and also updated my
                            >>>>>
                            >>>>>profile
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>here in Yahoo to reflect that change. Sometimes, however, the
                            >>>
                            >>>old
                            >>>
                            >>>
                            >>>>>>>email address still pops up. I don't know why or how to fix
                            >
                            > it.
                            >
                            >>>>>>>Will you please confirm your email address and maybe give me
                            >
                            > an
                            >
                            >>>>>>>alternative if you have one?
                            >>>>>>>
                            >>>>>>>Until we get the communications working right it seems a bit
                            >>>>>>>foolhardy to attempt a Paypal transfer although I'm ready and
                            >>>>>
                            >>>>>willing
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>to do so. I don't want to do a transfer only to have it fall
                            >>>
                            >>>into
                            >>>
                            >>>
                            >>>>>a
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>black hole somewhere. That could cause all sorts of
                            >
                            > frustration
                            >
                            >>>>>on
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>both ends. Please keep in mind that I really want to conclude
                            >>>>>
                            >>>>>this
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>transaction, however.
                            >>>>>>>
                            >>>>>>>So, my "real" email address is the one I gave you earlier:
                            >>>>>>>
                            >>>>>>>jim_knighton@m... (The one message I received from you was
                            >
                            > sent
                            >
                            >>>>>to
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>this address)
                            >>>>>>>
                            >>>>>>>my old and defunct address is:
                            >>>>>>>
                            >>>>>>>jimknighton@w... (don't use this one - that account is
                            >>>>>>>dead. If you have it in your address book, please delete it).
                            >>>>>>>
                            >>>>>>>Here are a couple of "emergency backup" addresses we can try
                            >
                            > as
                            >
                            >>>>>well:
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>jim_knighton@g...
                            >>>>>>>and
                            >>>>>>>jim_knighton@j...
                            >>>>>>>
                            >>>>>>>I'll make a point of checking these frequently until we get
                            >>>>>
                            >>>>>things
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>sorted out. I've never had this kind of problem before, and I
                            >
                            > do
                            >
                            >>>>>a
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>lot of email correspondence with people all around the world.
                            >>>>>
                            >>>>>This is
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>just crazy, and I don't have a clue which end the problem is
                            >
                            > on.
                            >
                            >>>>>>>Thanks for being persistent and contacting me this way.
                            >>>>>
                            >>>>>Hopefully, no
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>one else is having this problem.
                            >>>>>>>
                            >>>>>>>Anyway, As soon as this posts I'll send you three test
                            >
                            > messages
                            >
                            >>>>>from
                            >>>>
                            >>>>>
                            >>>>>>>each of the aforementioned active accounts in hopes that
                            >>>>>
                            >>>>>something
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>gets through. If I don't hear back from you "soon" I'll post
                            >>>>>
                            >>>>>another
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>message here to apprise you of that fact. So, here's hoping we
                            >>>>>
                            >>>>>can
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>sort it out.
                            >>>>>>>
                            >>>>>>>Regards,
                            >>>>>>>
                            >>>>>>>Jim
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                            >>>>>
                            >>>>>wrote:
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>>Hi Jim,
                            >>>>>>>>
                            >>>>>>>>An email I sent you on the 29th has been undelivered with the
                            >>>>>>>
                            >>>>>>>message;
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>>-------------------------
                            >>>>>>>>This is the Postfix program at host webrdr.connect.com.au.
                            >>>>>>>>
                            >>>>>>>>I'm sorry to have to inform you that the message returned
                            >>>>>>>>below could not be delivered to one or more destinations.
                            >>>>>>>>
                            >>>>>>>>For further assistance, please send mail to <postmaster>
                            >>>>>>>>
                            >>>>>>>>If you do so, please include this problem report. You can
                            >>>>>>>>delete your own text from the message returned below.
                            >>>>>>>>
                            >>>>>>>> The Postfix program
                            >>>>>>>>
                            >>>>>>>><jim_knighton@m...>: connect to mx3.hotmail.com
                            >
                            > [65.54.244.200]:
                            >
                            >>>>>>>Connection
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>> timed out
                            >>>>>>>>
                            >>>>>>>>---------------------------
                            >>>>>>>>
                            >>>>>>>>I sent you an email this morning. Did you receive it?
                            >>>>>>>>
                            >>>>>>>>Do you have another Enail address I can use?
                            >>>>>>>>
                            >>>>>>>>I can supply the DigiSpeed plus cable. The cost is 71.00
                            >>>>>
                            >>>>>including
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>postage.
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>>I presume it is for installation in a Sherline DC motor
                            >>>>>
                            >>>>>controller
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>housing?
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>>Cheers,
                            >>>>>>>>
                            >>>>>>>>Peter.
                            >>>>>>>>
                            >>>>>>>>
                            >>>>>>>>Jim Knighton wrote:
                            >>>>>>>>
                            >>>>>>>>
                            >>>>>>>>
                            >>>>>>>>
                            >>>>>>>>>Hi Peter...
                            >>>>>>>>>
                            >>>>>>>>>I want to buy a Digispeed controller and also the MiniDin
                            >>>
                            >>>cable.
                            >>>
                            >>>
                            >>>>>>>In
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>>>as much as payment will be via paypal I sent you an email to
                            >>>>>
                            >>>>>this
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>>>effect via the link on your web site. I guess it never went
                            >>>>>>>
                            >>>>>>>through.
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>>>Anyway, it's for a small Sherline lathe with PMDX
                            >
                            > electronics
                            >
                            >>>>>>>running
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>>>Mach 3 software. I'm assuming that since others are using
                            >
                            > Mach
                            >
                            >>>3
                            >>>
                            >>>
                            >>>>>>>the
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>>>setup is manageable. My thought was to run the cable (minus
                            >>>
                            >>>one
                            >>>
                            >>>
                            >>>>>>>end)
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>>>directly to my PMDX breakout board. I'm not sure how to
                            >>>>>
                            >>>>>configure
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>>>Mach, but I suppose I'll sort it out soon enough.
                            >>>>>>>>>
                            >>>>>>>>>Contact me at jim_knighton@m...
                            >>>>>>>>>
                            >>>>>>>>>Regards,
                            >>>>>>>>>
                            >>>>>>>>>Jim
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann
                            >
                            > <groups@h...>
                            >
                            >>>>>>>wrote:
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>>>>Hi Jim,
                            >>>>>>>>>>
                            >>>>>>>>>>I'm here. Don't recall seeing an email from you.
                            >>>>>>>>>>
                            >>>>>>>>>>How can I help.
                            >>>>>>>>>>
                            >>>>>>>>>>Cheers,
                            >>>>>>>>>>
                            >>>>>>>>>>
                            >>>>>>>>>>Peter.
                            >>>>>>>>>>
                            >>>>>>>>>>
                            >>>>>>>>>>Jim Knighton wrote:
                            >>>>>>>>>>
                            >>>>>>>>>>
                            >>>>>>>>>>
                            >>>>>>>>>>
                            >>>>>>>>>>
                            >>>>>>>>>>>Is there a US source for Peter Homann's Digispeed
                            >>>
                            >>>controller?
                            >>>
                            >>>
                            >>>>>>>>>I've
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>>>tried contacting him (last week) directly via his web site
                            >>>
                            >>>but
                            >>>
                            >>>
                            >>>>>>>so
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>>>far
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>>>there hasn't been a response. Any thoughts?
                            >>>>>>>>>>>
                            >>>>>>>>>>>Regards,
                            >>>>>>>>>>>
                            >>>>>>>>>>>Jim
                            >>>>>>>>>>>
                            >>>>>>>>>>>
                            >>>>>>>>>>>
                            >>>>>>>>>>>
                            >>>>>>>>>>>
                            >>>>>>>>>>>
                            >>>>>>>>>>>
                            >>>>>>>>>>>
                            >>>>>>>>>>>Yahoo! Groups Links
                            >>>>>>>>>>>
                            >>>>>>>>>>>
                            >>>>>>>>>>>
                            >>>>>>>>>>>
                            >>>>>>>>>>>
                            >>>>>>>>>>>
                            >>>>>>>>>>>
                            >>>>>>>>>>
                            >>>>>>>>>>--
                            >>>>>>>>>>------------------------------------------------------------
                            >
                            > --
                            >
                            >>>--
                            >>>
                            >>>
                            >>>>>--
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>>>>Web: www.homanndesigns.com
                            >>>>>>>>>>email: homann@h...
                            >>>>>>>>>>Phone: +61 421 601 665
                            >>>>>>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface
                            >>>
                            >>>Unit
                            >>>
                            >>>
                            >>>>>>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle
                            >
                            > control
                            >
                            >>>>>>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill
                            >
                            > Upgrade
                            >
                            >>>>>board
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>Yahoo! Groups Links
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>>
                            >>>>>>>>
                            >>>>>>>>--
                            >>>>>>>>--------------------------------------------------------------
                            >
                            > --
                            >
                            >>>--
                            >>>
                            >>>
                            >>>>>>>>Web: www.homanndesigns.com
                            >>>>>>>>email: homann@h...
                            >>>>>>>>Phone: +61 421 601 665
                            >>>>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface
                            >
                            > Unit
                            >
                            >>>>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                            >>>>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                            >>>
                            >>>board
                            >>>
                            >>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>Yahoo! Groups Links
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>>
                            >>>>>>
                            >>>>>>--
                            >>>>>>----------------------------------------------------------------
                            >
                            > --
                            >
                            >>>>>>Web: www.homanndesigns.com
                            >>>>>>email: homann@h...
                            >>>>>>Phone: +61 421 601 665
                            >>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                            >>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                            >>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                            >
                            > board
                            >
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>Yahoo! Groups Links
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>>
                            >>>>
                            >>>>--
                            >>>>------------------------------------------------------------------
                            >>>>Web: www.homanndesigns.com
                            >>>>email: homann@
                            >>>>Phone: +61 421 601 665
                            >>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                            >>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                            >>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                            >>>>
                            >>>
                            >>>
                            >>>
                            >>>
                            >>>
                            >>>
                            >>>
                            >>>
                            >>>
                            >>>Yahoo! Groups Links
                            >>>
                            >>>
                            >>>
                            >>>
                            >>>
                            >>>
                            >>>
                            >>
                            >>--
                            >>------------------------------------------------------------------
                            >>Web: www.homanndesigns.com
                            >>email: homann@...
                            >>Phone: +61 421 601 665
                            >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                            >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                            >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                            >>
                            >
                            >
                            >
                            >
                            >
                            >
                            >
                            >
                            >
                            > Yahoo! Groups Links
                            >
                            >
                            >
                            >
                            >
                            >
                            >

                            --
                            ------------------------------------------------------------------
                            Web: www.homanndesigns.com
                            email: homann@...
                            Phone: +61 421 601 665
                            www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                            www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                            www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                          • Jim Knighton
                            Peter, OK, the transfer is complete and I ve received the confirmation receipt from PayPal. This time I didn t get the not registered message and your
                            Message 13 of 24 , Feb 1, 2006
                            • 0 Attachment
                              Peter,

                              OK, the transfer is complete and I've received the confirmation
                              receipt from PayPal. This time I didn't get the "not registered"
                              message and your account came up just like it should. Hopefully, you
                              will receive confirmation on your end in a few minutes. Please let me
                              know if there are any more glitches.

                              Regards,

                              Jim


                              --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@...> wrote:
                              >
                              > Jim,
                              >
                              > When it rains it pours. On the 1st Fed, Paypal switched all the
                              accounts held
                              > by Australians to Paypal Australia. I'm assuming they were forced
                              to by the
                              > Australian Government for tax tracking purposes.
                              >
                              > Maybe there is a glitch in their system. The address homann@...
                              > is correct for Paypal transfers.
                              >
                              > I'd give it another go.
                              >
                              > Or, what about this, I'll send you the DigiSpeed (Sherline version)
                              plus the
                              > MiniDin cable. When you receive it, pay me then. By that time,
                              Paypal and
                              > other problems may have sorted themselves out.
                              >
                              > Did you receive my test messages sent just over an hour ago?
                              >
                              > Cheers,
                              >
                              > Peter.
                              >
                              > Jim Knighton wrote:
                              > > Peter,
                              > >
                              > > On the basis of your last post I decided to try the Paypal
                              transfer
                              > > to homann@... Unfortunately, now Paypal says that this
                              > > account is not registered with them. Since other guys have posted
                              > > here that they have purchased from you via PayPal, it appears
                              that
                              > > either you have payments sent to another address that is
                              registered
                              > > with them or there is still a problem. On my own from this end I
                              > > can't discern what is going on...
                              > >
                              > > In the various messages that I've sent I've given you my snail
                              mail
                              > > address (at least twice) and asked for verification of the email
                              > > address you prefer for Paypal. I've never received anything from
                              you
                              > > so far to suggest that you've received those messages nor has
                              there
                              > > been a response to these queries. This latest glitch has me
                              nervous
                              > > about proceeding without better validation that if I send the
                              money
                              > > you will actually receive it. I'm in a real quandry here as this
                              > > forum appears to be the only reliable means for communicating
                              with
                              > > you.
                              > >
                              > > Regards,
                              > >
                              > > Jim
                              > >
                              > > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@> wrote:
                              > >
                              > >>Hi Jim,
                              > >>
                              > >>I went to bed after sending the first 2 test messages. I just
                              sent
                              > >
                              > > a message
                              > >
                              > >>to jimknighton@
                              > >>
                              > >>I am receiving email from all 3 addresses. You don't seem to be
                              > >
                              > > getting my
                              > >
                              > >>replys sent to jim_knighton@
                              > >>
                              > >>Cheers,
                              > >>
                              > >>Peter.
                              > >>
                              > >>Jim Knighton wrote:
                              > >>
                              > >>>Peter,
                              > >>>
                              > >>>I don't know if you've sent anything, but there hasn't been any
                              > >
                              > > email
                              > >
                              > >>>activity on this end for over an hour.
                              > >>>
                              > >>>Regards,
                              > >>>
                              > >>>Jim
                              > >>>
                              > >>>
                              > >>>
                              > >>>
                              > >>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                              > >
                              > > wrote:
                              > >
                              > >>>>Hi Jim,
                              > >>>>
                              > >>>>I am receiving your emails. You are not receiving mine??
                              > >>>>
                              > >>>>
                              > >>>>I just replied to your message from jimknighton@g... hopefully
                              > >
                              > > you
                              > >
                              > >>>>received my reply.
                              > >>>>
                              > >>>>Cheers,
                              > >>>>
                              > >>>>Peter.
                              > >>>>
                              > >>>>
                              > >>>>Jim Knighton wrote:
                              > >>>>
                              > >>>>
                              > >>>>>Peter,
                              > >>>>>
                              > >>>>>I've sent you several emails now, including one each on the
                              last
                              > >>>
                              > >>>two
                              > >>>
                              > >>>
                              > >>>>>days. It appears that you aren't receiving them. I did get one
                              > >>>
                              > >>>email
                              > >>>
                              > >>>
                              > >>>>>from you a couple of days ago, to which I responded. I don't
                              > >
                              > > know
                              > >
                              > >>>>>what is going on... With the messages I've sent you I've never
                              > >>>>>recieved an "undelivered" message, so from all I see it looks
                              > >>>
                              > >>>like
                              > >>>
                              > >>>
                              > >>>>>they are sent and received.
                              > >>>>>
                              > >>>>>
                              > >>>>>I changed my ISP a couple of months ago and also updated my
                              > >>>
                              > >>>profile
                              > >>>
                              > >>>
                              > >>>>>here in Yahoo to reflect that change. Sometimes, however, the
                              > >
                              > > old
                              > >
                              > >>>>>email address still pops up. I don't know why or how to fix
                              it.
                              > >>>>>
                              > >>>>>Will you please confirm your email address and maybe give me
                              an
                              > >>>>>alternative if you have one?
                              > >>>>>
                              > >>>>>Until we get the communications working right it seems a bit
                              > >>>>>foolhardy to attempt a Paypal transfer although I'm ready and
                              > >>>
                              > >>>willing
                              > >>>
                              > >>>
                              > >>>>>to do so. I don't want to do a transfer only to have it fall
                              > >
                              > > into
                              > >
                              > >>>a
                              > >>>
                              > >>>
                              > >>>>>black hole somewhere. That could cause all sorts of
                              frustration
                              > >>>
                              > >>>on
                              > >>>
                              > >>>
                              > >>>>>both ends. Please keep in mind that I really want to conclude
                              > >>>
                              > >>>this
                              > >>>
                              > >>>
                              > >>>>>transaction, however.
                              > >>>>>
                              > >>>>>So, my "real" email address is the one I gave you earlier:
                              > >>>>>
                              > >>>>>jim_knighton@m... (The one message I received from you was
                              sent
                              > >>>
                              > >>>to
                              > >>>
                              > >>>
                              > >>>>>this address)
                              > >>>>>
                              > >>>>>my old and defunct address is:
                              > >>>>>
                              > >>>>>jimknighton@w... (don't use this one - that account is
                              > >>>>>dead. If you have it in your address book, please delete it).
                              > >>>>>
                              > >>>>>Here are a couple of "emergency backup" addresses we can try
                              as
                              > >>>
                              > >>>well:
                              > >>>
                              > >>>
                              > >>>>>jim_knighton@g...
                              > >>>>>and
                              > >>>>>jim_knighton@j...
                              > >>>>>
                              > >>>>>I'll make a point of checking these frequently until we get
                              > >>>
                              > >>>things
                              > >>>
                              > >>>
                              > >>>>>sorted out. I've never had this kind of problem before, and I
                              do
                              > >>>
                              > >>>a
                              > >>>
                              > >>>
                              > >>>>>lot of email correspondence with people all around the world.
                              > >>>
                              > >>>This is
                              > >>>
                              > >>>
                              > >>>>>just crazy, and I don't have a clue which end the problem is
                              on.
                              > >>>>>
                              > >>>>>Thanks for being persistent and contacting me this way.
                              > >>>
                              > >>>Hopefully, no
                              > >>>
                              > >>>
                              > >>>>>one else is having this problem.
                              > >>>>>
                              > >>>>>Anyway, As soon as this posts I'll send you three test
                              messages
                              > >>>
                              > >>>from
                              > >>>
                              > >>>
                              > >>>>>each of the aforementioned active accounts in hopes that
                              > >>>
                              > >>>something
                              > >>>
                              > >>>
                              > >>>>>gets through. If I don't hear back from you "soon" I'll post
                              > >>>
                              > >>>another
                              > >>>
                              > >>>
                              > >>>>>message here to apprise you of that fact. So, here's hoping we
                              > >>>
                              > >>>can
                              > >>>
                              > >>>
                              > >>>>>sort it out.
                              > >>>>>
                              > >>>>>Regards,
                              > >>>>>
                              > >>>>>Jim
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                              > >>>
                              > >>>wrote:
                              > >>>
                              > >>>
                              > >>>>>>Hi Jim,
                              > >>>>>>
                              > >>>>>>An email I sent you on the 29th has been undelivered with the
                              > >>>>>
                              > >>>>>message;
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>>-------------------------
                              > >>>>>>This is the Postfix program at host webrdr.connect.com.au.
                              > >>>>>>
                              > >>>>>>I'm sorry to have to inform you that the message returned
                              > >>>>>>below could not be delivered to one or more destinations.
                              > >>>>>>
                              > >>>>>>For further assistance, please send mail to <postmaster>
                              > >>>>>>
                              > >>>>>>If you do so, please include this problem report. You can
                              > >>>>>>delete your own text from the message returned below.
                              > >>>>>>
                              > >>>>>> The Postfix program
                              > >>>>>>
                              > >>>>>><jim_knighton@m...>: connect to mx3.hotmail.com
                              [65.54.244.200]:
                              > >>>>>
                              > >>>>>Connection
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>> timed out
                              > >>>>>>
                              > >>>>>>---------------------------
                              > >>>>>>
                              > >>>>>>I sent you an email this morning. Did you receive it?
                              > >>>>>>
                              > >>>>>>Do you have another Enail address I can use?
                              > >>>>>>
                              > >>>>>>I can supply the DigiSpeed plus cable. The cost is 71.00
                              > >>>
                              > >>>including
                              > >>>
                              > >>>
                              > >>>>>postage.
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>>I presume it is for installation in a Sherline DC motor
                              > >>>
                              > >>>controller
                              > >>>
                              > >>>
                              > >>>>>housing?
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>>Cheers,
                              > >>>>>>
                              > >>>>>>Peter.
                              > >>>>>>
                              > >>>>>>
                              > >>>>>>Jim Knighton wrote:
                              > >>>>>>
                              > >>>>>>
                              > >>>>>>
                              > >>>>>>>Hi Peter...
                              > >>>>>>>
                              > >>>>>>>I want to buy a Digispeed controller and also the MiniDin
                              > >
                              > > cable.
                              > >
                              > >>>>>In
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>>>as much as payment will be via paypal I sent you an email to
                              > >>>
                              > >>>this
                              > >>>
                              > >>>
                              > >>>>>>>effect via the link on your web site. I guess it never went
                              > >>>>>
                              > >>>>>through.
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>>>Anyway, it's for a small Sherline lathe with PMDX
                              electronics
                              > >>>>>
                              > >>>>>running
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>>>Mach 3 software. I'm assuming that since others are using
                              Mach
                              > >
                              > > 3
                              > >
                              > >>>>>the
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>>>setup is manageable. My thought was to run the cable (minus
                              > >
                              > > one
                              > >
                              > >>>>>end)
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>>>directly to my PMDX breakout board. I'm not sure how to
                              > >>>
                              > >>>configure
                              > >>>
                              > >>>
                              > >>>>>>>Mach, but I suppose I'll sort it out soon enough.
                              > >>>>>>>
                              > >>>>>>>Contact me at jim_knighton@m...
                              > >>>>>>>
                              > >>>>>>>Regards,
                              > >>>>>>>
                              > >>>>>>>Jim
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann
                              <groups@h...>
                              > >>>>>
                              > >>>>>wrote:
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>>>>Hi Jim,
                              > >>>>>>>>
                              > >>>>>>>>I'm here. Don't recall seeing an email from you.
                              > >>>>>>>>
                              > >>>>>>>>How can I help.
                              > >>>>>>>>
                              > >>>>>>>>Cheers,
                              > >>>>>>>>
                              > >>>>>>>>
                              > >>>>>>>>Peter.
                              > >>>>>>>>
                              > >>>>>>>>
                              > >>>>>>>>Jim Knighton wrote:
                              > >>>>>>>>
                              > >>>>>>>>
                              > >>>>>>>>
                              > >>>>>>>>
                              > >>>>>>>>>Is there a US source for Peter Homann's Digispeed
                              > >
                              > > controller?
                              > >
                              > >>>>>>>I've
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>>>tried contacting him (last week) directly via his web site
                              > >
                              > > but
                              > >
                              > >>>>>so
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>>>far
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>>>there hasn't been a response. Any thoughts?
                              > >>>>>>>>>
                              > >>>>>>>>>Regards,
                              > >>>>>>>>>
                              > >>>>>>>>>Jim
                              > >>>>>>>>>
                              > >>>>>>>>>
                              > >>>>>>>>>
                              > >>>>>>>>>
                              > >>>>>>>>>
                              > >>>>>>>>>
                              > >>>>>>>>>
                              > >>>>>>>>>
                              > >>>>>>>>>Yahoo! Groups Links
                              > >>>>>>>>>
                              > >>>>>>>>>
                              > >>>>>>>>>
                              > >>>>>>>>>
                              > >>>>>>>>>
                              > >>>>>>>>>
                              > >>>>>>>>>
                              > >>>>>>>>
                              > >>>>>>>>--
                              > >>>>>>>>------------------------------------------------------------
                              --
                              > >
                              > > --
                              > >
                              > >>>--
                              > >>>
                              > >>>
                              > >>>>>>>>Web: www.homanndesigns.com
                              > >>>>>>>>email: homann@h...
                              > >>>>>>>>Phone: +61 421 601 665
                              > >>>>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface
                              > >
                              > > Unit
                              > >
                              > >>>>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle
                              control
                              > >>>>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill
                              Upgrade
                              > >>>
                              > >>>board
                              > >>>
                              > >>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>Yahoo! Groups Links
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>>
                              > >>>>>>
                              > >>>>>>--
                              > >>>>>>--------------------------------------------------------------
                              --
                              > >
                              > > --
                              > >
                              > >>>>>>Web: www.homanndesigns.com
                              > >>>>>>email: homann@h...
                              > >>>>>>Phone: +61 421 601 665
                              > >>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface
                              Unit
                              > >>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                              > >>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                              > >
                              > > board
                              > >
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>Yahoo! Groups Links
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>>
                              > >>>>
                              > >>>>--
                              > >>>>----------------------------------------------------------------
                              --
                              > >>>>Web: www.homanndesigns.com
                              > >>>>email: homann@h...
                              > >>>>Phone: +61 421 601 665
                              > >>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                              > >>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                              > >>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                              board
                              > >>>>
                              > >>>
                              > >>>
                              > >>>
                              > >>>
                              > >>>
                              > >>>
                              > >>>
                              > >>>
                              > >>>Yahoo! Groups Links
                              > >>>
                              > >>>
                              > >>>
                              > >>>
                              > >>>
                              > >>>
                              > >>>
                              > >>>
                              > >>>
                              > >>>
                              > >>
                              > >>--
                              > >>------------------------------------------------------------------
                              > >>Web: www.homanndesigns.com
                              > >>email: homann@
                              > >>Phone: +61 421 601 665
                              > >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                              > >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                              > >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                              > >>
                              > >
                              > >
                              > >
                              > >
                              > >
                              > >
                              > >
                              > >
                              > >
                              > > Yahoo! Groups Links
                              > >
                              > >
                              > >
                              > >
                              > >
                              > >
                              > >
                              >
                              > --
                              > ------------------------------------------------------------------
                              > Web: www.homanndesigns.com
                              > email: homann@...
                              > Phone: +61 421 601 665
                              > www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                              > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                              > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                              >
                            • Jim Knighton
                              Peter, Yes, it s a real puzzler. I ve never seen anything happen like this or even heard about the same. How long does it take for stuff to get here from down
                              Message 14 of 24 , Feb 1, 2006
                              • 0 Attachment
                                Peter,

                                Yes, it's a real puzzler. I've never seen anything happen like this
                                or even heard about the same. How long does it take for stuff to get
                                here from down under? Two weeks? Longer? I'm just trying to establish
                                reasonable expectations.

                                Regards,

                                Jim


                                --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@...> wrote:
                                >
                                > Hi Jim,
                                >
                                > Yes, I have received a Paypal payment from you.
                                >
                                > Don't know what is going on with the mail though??
                                >
                                > Cheers,
                                >
                                > Peter.
                                >
                                > Jim Knighton wrote:
                                > > Peter,
                                > >
                                > > I've not received any email from you all day except one message
                                that
                                > > crossed my earlier post in the forum. I've received email from
                                > > Alaska, Israel, and elsewhere in the US on both msn and gmail
                                > > accounts. Nothing from you recently, however.
                                > >
                                > > I'm nervous as hell about it, but I guess I'll try the PayPal
                                > > transfer and hope for the best. I'll post a message here when I'm
                                > > finished. Please let me know right away if you receive it.
                                > >
                                > > Regards,
                                > >
                                > > Jim
                                > >
                                > >
                                > > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@> wrote:
                                > >
                                > >>Jim,
                                > >>
                                > >>When it rains it pours. On the 1st Fed, Paypal switched all the
                                > >
                                > > accounts held
                                > >
                                > >>by Australians to Paypal Australia. I'm assuming they were forced
                                > >
                                > > to by the
                                > >
                                > >>Australian Government for tax tracking purposes.
                                > >>
                                > >>Maybe there is a glitch in their system. The address homann@
                                > >>is correct for Paypal transfers.
                                > >>
                                > >>I'd give it another go.
                                > >>
                                > >>Or, what about this, I'll send you the DigiSpeed (Sherline
                                version)
                                > >
                                > > plus the
                                > >
                                > >>MiniDin cable. When you receive it, pay me then. By that time,
                                > >
                                > > Paypal and
                                > >
                                > >>other problems may have sorted themselves out.
                                > >>
                                > >>Did you receive my test messages sent just over an hour ago?
                                > >>
                                > >>Cheers,
                                > >>
                                > >>Peter.
                                > >>
                                > >>Jim Knighton wrote:
                                > >>
                                > >>>Peter,
                                > >>>
                                > >>>On the basis of your last post I decided to try the Paypal
                                > >
                                > > transfer
                                > >
                                > >>>to homann@ Unfortunately, now Paypal says that this
                                > >>>account is not registered with them. Since other guys have
                                posted
                                > >>>here that they have purchased from you via PayPal, it appears
                                > >
                                > > that
                                > >
                                > >>>either you have payments sent to another address that is
                                > >
                                > > registered
                                > >
                                > >>>with them or there is still a problem. On my own from this end I
                                > >>>can't discern what is going on...
                                > >>>
                                > >>>In the various messages that I've sent I've given you my snail
                                > >
                                > > mail
                                > >
                                > >>>address (at least twice) and asked for verification of the email
                                > >>>address you prefer for Paypal. I've never received anything from
                                > >
                                > > you
                                > >
                                > >>>so far to suggest that you've received those messages nor has
                                > >
                                > > there
                                > >
                                > >>>been a response to these queries. This latest glitch has me
                                > >
                                > > nervous
                                > >
                                > >>>about proceeding without better validation that if I send the
                                > >
                                > > money
                                > >
                                > >>>you will actually receive it. I'm in a real quandry here as this
                                > >>>forum appears to be the only reliable means for communicating
                                > >
                                > > with
                                > >
                                > >>>you.
                                > >>>
                                > >>>Regards,
                                > >>>
                                > >>>Jim
                                > >>>
                                > >>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@> wrote:
                                > >>>
                                > >>>
                                > >>>>Hi Jim,
                                > >>>>
                                > >>>>I went to bed after sending the first 2 test messages. I just
                                > >
                                > > sent
                                > >
                                > >>>a message
                                > >>>
                                > >>>
                                > >>>>to jimknighton@
                                > >>>>
                                > >>>>I am receiving email from all 3 addresses. You don't seem to be
                                > >>>
                                > >>>getting my
                                > >>>
                                > >>>
                                > >>>>replys sent to jim_knighton@
                                > >>>>
                                > >>>>Cheers,
                                > >>>>
                                > >>>>Peter.
                                > >>>>
                                > >>>>Jim Knighton wrote:
                                > >>>>
                                > >>>>
                                > >>>>>Peter,
                                > >>>>>
                                > >>>>>I don't know if you've sent anything, but there hasn't been
                                any
                                > >>>
                                > >>>email
                                > >>>
                                > >>>
                                > >>>>>activity on this end for over an hour.
                                > >>>>>
                                > >>>>>Regards,
                                > >>>>>
                                > >>>>>Jim
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                                > >>>
                                > >>>wrote:
                                > >>>
                                > >>>
                                > >>>>>>Hi Jim,
                                > >>>>>>
                                > >>>>>>I am receiving your emails. You are not receiving mine??
                                > >>>>>>
                                > >>>>>>
                                > >>>>>>I just replied to your message from jimknighton@g...
                                hopefully
                                > >>>
                                > >>>you
                                > >>>
                                > >>>
                                > >>>>>>received my reply.
                                > >>>>>>
                                > >>>>>>Cheers,
                                > >>>>>>
                                > >>>>>>Peter.
                                > >>>>>>
                                > >>>>>>
                                > >>>>>>Jim Knighton wrote:
                                > >>>>>>
                                > >>>>>>
                                > >>>>>>
                                > >>>>>>>Peter,
                                > >>>>>>>
                                > >>>>>>>I've sent you several emails now, including one each on the
                                > >
                                > > last
                                > >
                                > >>>>>two
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>days. It appears that you aren't receiving them. I did get
                                one
                                > >>>>>
                                > >>>>>email
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>from you a couple of days ago, to which I responded. I don't
                                > >>>
                                > >>>know
                                > >>>
                                > >>>
                                > >>>>>>>what is going on... With the messages I've sent you I've
                                never
                                > >>>>>>>recieved an "undelivered" message, so from all I see it
                                looks
                                > >>>>>
                                > >>>>>like
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>they are sent and received.
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>I changed my ISP a couple of months ago and also updated my
                                > >>>>>
                                > >>>>>profile
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>here in Yahoo to reflect that change. Sometimes, however,
                                the
                                > >>>
                                > >>>old
                                > >>>
                                > >>>
                                > >>>>>>>email address still pops up. I don't know why or how to fix
                                > >
                                > > it.
                                > >
                                > >>>>>>>Will you please confirm your email address and maybe give me
                                > >
                                > > an
                                > >
                                > >>>>>>>alternative if you have one?
                                > >>>>>>>
                                > >>>>>>>Until we get the communications working right it seems a bit
                                > >>>>>>>foolhardy to attempt a Paypal transfer although I'm ready
                                and
                                > >>>>>
                                > >>>>>willing
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>to do so. I don't want to do a transfer only to have it fall
                                > >>>
                                > >>>into
                                > >>>
                                > >>>
                                > >>>>>a
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>black hole somewhere. That could cause all sorts of
                                > >
                                > > frustration
                                > >
                                > >>>>>on
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>both ends. Please keep in mind that I really want to
                                conclude
                                > >>>>>
                                > >>>>>this
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>transaction, however.
                                > >>>>>>>
                                > >>>>>>>So, my "real" email address is the one I gave you earlier:
                                > >>>>>>>
                                > >>>>>>>jim_knighton@m... (The one message I received from you was
                                > >
                                > > sent
                                > >
                                > >>>>>to
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>this address)
                                > >>>>>>>
                                > >>>>>>>my old and defunct address is:
                                > >>>>>>>
                                > >>>>>>>jimknighton@w... (don't use this one - that account is
                                > >>>>>>>dead. If you have it in your address book, please delete it).
                                > >>>>>>>
                                > >>>>>>>Here are a couple of "emergency backup" addresses we can try
                                > >
                                > > as
                                > >
                                > >>>>>well:
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>jim_knighton@g...
                                > >>>>>>>and
                                > >>>>>>>jim_knighton@j...
                                > >>>>>>>
                                > >>>>>>>I'll make a point of checking these frequently until we get
                                > >>>>>
                                > >>>>>things
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>sorted out. I've never had this kind of problem before, and
                                I
                                > >
                                > > do
                                > >
                                > >>>>>a
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>lot of email correspondence with people all around the
                                world.
                                > >>>>>
                                > >>>>>This is
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>just crazy, and I don't have a clue which end the problem is
                                > >
                                > > on.
                                > >
                                > >>>>>>>Thanks for being persistent and contacting me this way.
                                > >>>>>
                                > >>>>>Hopefully, no
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>one else is having this problem.
                                > >>>>>>>
                                > >>>>>>>Anyway, As soon as this posts I'll send you three test
                                > >
                                > > messages
                                > >
                                > >>>>>from
                                > >>>>
                                > >>>>>
                                > >>>>>>>each of the aforementioned active accounts in hopes that
                                > >>>>>
                                > >>>>>something
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>gets through. If I don't hear back from you "soon" I'll post
                                > >>>>>
                                > >>>>>another
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>message here to apprise you of that fact. So, here's hoping
                                we
                                > >>>>>
                                > >>>>>can
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>sort it out.
                                > >>>>>>>
                                > >>>>>>>Regards,
                                > >>>>>>>
                                > >>>>>>>Jim
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann
                                <groups@h...>
                                > >>>>>
                                > >>>>>wrote:
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>>Hi Jim,
                                > >>>>>>>>
                                > >>>>>>>>An email I sent you on the 29th has been undelivered with
                                the
                                > >>>>>>>
                                > >>>>>>>message;
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>>-------------------------
                                > >>>>>>>>This is the Postfix program at host webrdr.connect.com.au.
                                > >>>>>>>>
                                > >>>>>>>>I'm sorry to have to inform you that the message returned
                                > >>>>>>>>below could not be delivered to one or more destinations.
                                > >>>>>>>>
                                > >>>>>>>>For further assistance, please send mail to <postmaster>
                                > >>>>>>>>
                                > >>>>>>>>If you do so, please include this problem report. You can
                                > >>>>>>>>delete your own text from the message returned below.
                                > >>>>>>>>
                                > >>>>>>>> The Postfix program
                                > >>>>>>>>
                                > >>>>>>>><jim_knighton@m...>: connect to mx3.hotmail.com
                                > >
                                > > [65.54.244.200]:
                                > >
                                > >>>>>>>Connection
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>> timed out
                                > >>>>>>>>
                                > >>>>>>>>---------------------------
                                > >>>>>>>>
                                > >>>>>>>>I sent you an email this morning. Did you receive it?
                                > >>>>>>>>
                                > >>>>>>>>Do you have another Enail address I can use?
                                > >>>>>>>>
                                > >>>>>>>>I can supply the DigiSpeed plus cable. The cost is 71.00
                                > >>>>>
                                > >>>>>including
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>postage.
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>>I presume it is for installation in a Sherline DC motor
                                > >>>>>
                                > >>>>>controller
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>housing?
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>>Cheers,
                                > >>>>>>>>
                                > >>>>>>>>Peter.
                                > >>>>>>>>
                                > >>>>>>>>
                                > >>>>>>>>Jim Knighton wrote:
                                > >>>>>>>>
                                > >>>>>>>>
                                > >>>>>>>>
                                > >>>>>>>>
                                > >>>>>>>>>Hi Peter...
                                > >>>>>>>>>
                                > >>>>>>>>>I want to buy a Digispeed controller and also the MiniDin
                                > >>>
                                > >>>cable.
                                > >>>
                                > >>>
                                > >>>>>>>In
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>>>as much as payment will be via paypal I sent you an email
                                to
                                > >>>>>
                                > >>>>>this
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>>>effect via the link on your web site. I guess it never
                                went
                                > >>>>>>>
                                > >>>>>>>through.
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>>>Anyway, it's for a small Sherline lathe with PMDX
                                > >
                                > > electronics
                                > >
                                > >>>>>>>running
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>>>Mach 3 software. I'm assuming that since others are using
                                > >
                                > > Mach
                                > >
                                > >>>3
                                > >>>
                                > >>>
                                > >>>>>>>the
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>>>setup is manageable. My thought was to run the cable
                                (minus
                                > >>>
                                > >>>one
                                > >>>
                                > >>>
                                > >>>>>>>end)
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>>>directly to my PMDX breakout board. I'm not sure how to
                                > >>>>>
                                > >>>>>configure
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>>>Mach, but I suppose I'll sort it out soon enough.
                                > >>>>>>>>>
                                > >>>>>>>>>Contact me at jim_knighton@m...
                                > >>>>>>>>>
                                > >>>>>>>>>Regards,
                                > >>>>>>>>>
                                > >>>>>>>>>Jim
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann
                                > >
                                > > <groups@h...>
                                > >
                                > >>>>>>>wrote:
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>>>>Hi Jim,
                                > >>>>>>>>>>
                                > >>>>>>>>>>I'm here. Don't recall seeing an email from you.
                                > >>>>>>>>>>
                                > >>>>>>>>>>How can I help.
                                > >>>>>>>>>>
                                > >>>>>>>>>>Cheers,
                                > >>>>>>>>>>
                                > >>>>>>>>>>
                                > >>>>>>>>>>Peter.
                                > >>>>>>>>>>
                                > >>>>>>>>>>
                                > >>>>>>>>>>Jim Knighton wrote:
                                > >>>>>>>>>>
                                > >>>>>>>>>>
                                > >>>>>>>>>>
                                > >>>>>>>>>>
                                > >>>>>>>>>>
                                > >>>>>>>>>>>Is there a US source for Peter Homann's Digispeed
                                > >>>
                                > >>>controller?
                                > >>>
                                > >>>
                                > >>>>>>>>>I've
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>>>tried contacting him (last week) directly via his web
                                site
                                > >>>
                                > >>>but
                                > >>>
                                > >>>
                                > >>>>>>>so
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>>>far
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>>>there hasn't been a response. Any thoughts?
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>Regards,
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>Jim
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>Yahoo! Groups Links
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>
                                > >>>>>>>>>>>
                                > >>>>>>>>>>
                                > >>>>>>>>>>--
                                > >>>>>>>>>>----------------------------------------------------------
                                --
                                > >
                                > > --
                                > >
                                > >>>--
                                > >>>
                                > >>>
                                > >>>>>--
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>>>>Web: www.homanndesigns.com
                                > >>>>>>>>>>email: homann@h...
                                > >>>>>>>>>>Phone: +61 421 601 665
                                > >>>>>>>>>>www.homanndesigns.com/ModIO.html - Modbus
                                Interface
                                > >>>
                                > >>>Unit
                                > >>>
                                > >>>
                                > >>>>>>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle
                                > >
                                > > control
                                > >
                                > >>>>>>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill
                                > >
                                > > Upgrade
                                > >
                                > >>>>>board
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>Yahoo! Groups Links
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>>
                                > >>>>>>>>
                                > >>>>>>>>--
                                > >>>>>>>>------------------------------------------------------------
                                --
                                > >
                                > > --
                                > >
                                > >>>--
                                > >>>
                                > >>>
                                > >>>>>>>>Web: www.homanndesigns.com
                                > >>>>>>>>email: homann@h...
                                > >>>>>>>>Phone: +61 421 601 665
                                > >>>>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface
                                > >
                                > > Unit
                                > >
                                > >>>>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle
                                control
                                > >>>>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill
                                Upgrade
                                > >>>
                                > >>>board
                                > >>>
                                > >>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>Yahoo! Groups Links
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>>
                                > >>>>>>
                                > >>>>>>--
                                > >>>>>>--------------------------------------------------------------
                                --
                                > >
                                > > --
                                > >
                                > >>>>>>Web: www.homanndesigns.com
                                > >>>>>>email: homann@h...
                                > >>>>>>Phone: +61 421 601 665
                                > >>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface
                                Unit
                                > >>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                                > >>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                                > >
                                > > board
                                > >
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>Yahoo! Groups Links
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>>
                                > >>>>
                                > >>>>--
                                > >>>>----------------------------------------------------------------
                                --
                                > >>>>Web: www.homanndesigns.com
                                > >>>>email: homann@
                                > >>>>Phone: +61 421 601 665
                                > >>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                                > >>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                                > >>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                                board
                                > >>>>
                                > >>>
                                > >>>
                                > >>>
                                > >>>
                                > >>>
                                > >>>
                                > >>>
                                > >>>
                                > >>>
                                > >>>Yahoo! Groups Links
                                > >>>
                                > >>>
                                > >>>
                                > >>>
                                > >>>
                                > >>>
                                > >>>
                                > >>
                                > >>--
                                > >>------------------------------------------------------------------
                                > >>Web: www.homanndesigns.com
                                > >>email: homann@
                                > >>Phone: +61 421 601 665
                                > >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                                > >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                                > >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                                > >>
                                > >
                                > >
                                > >
                                > >
                                > >
                                > >
                                > >
                                > >
                                > >
                                > > Yahoo! Groups Links
                                > >
                                > >
                                > >
                                > >
                                > >
                                > >
                                > >
                                >
                                > --
                                > ------------------------------------------------------------------
                                > Web: www.homanndesigns.com
                                > email: homann@...
                                > Phone: +61 421 601 665
                                > www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                                > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                                > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                                >
                              • Peter Homann
                                Jim, Registered airmail take 10 to 14 days to reach the USA. I should have it in the mail on Monday. Cheers, Peter. ... -- ... Web: www.homanndesigns.com
                                Message 15 of 24 , Feb 1, 2006
                                • 0 Attachment
                                  Jim,

                                  Registered airmail take 10 to 14 days to reach the USA. I should have it in
                                  the mail on Monday.

                                  Cheers,

                                  Peter.

                                  Jim Knighton wrote:
                                  > Peter,
                                  >
                                  > Yes, it's a real puzzler. I've never seen anything happen like this
                                  > or even heard about the same. How long does it take for stuff to get
                                  > here from down under? Two weeks? Longer? I'm just trying to establish
                                  > reasonable expectations.
                                  >
                                  > Regards,
                                  >
                                  > Jim
                                  >
                                  >
                                  > --- In SherlineCNC@yahoogroups.com, Peter Homann <groups@...> wrote:
                                  >
                                  >>Hi Jim,
                                  >>
                                  >>Yes, I have received a Paypal payment from you.
                                  >>
                                  >>Don't know what is going on with the mail though??
                                  >>
                                  >>Cheers,
                                  >>
                                  >>Peter.
                                  >>
                                  >>Jim Knighton wrote:
                                  >>
                                  >>>Peter,
                                  >>>
                                  >>>I've not received any email from you all day except one message
                                  >
                                  > that
                                  >
                                  >>>crossed my earlier post in the forum. I've received email from
                                  >>>Alaska, Israel, and elsewhere in the US on both msn and gmail
                                  >>>accounts. Nothing from you recently, however.
                                  >>>
                                  >>>I'm nervous as hell about it, but I guess I'll try the PayPal
                                  >>>transfer and hope for the best. I'll post a message here when I'm
                                  >>>finished. Please let me know right away if you receive it.
                                  >>>
                                  >>>Regards,
                                  >>>
                                  >>>Jim
                                  >>>
                                  >>>
                                  >>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@> wrote:
                                  >>>
                                  >>>
                                  >>>>Jim,
                                  >>>>
                                  >>>>When it rains it pours. On the 1st Fed, Paypal switched all the
                                  >>>
                                  >>>accounts held
                                  >>>
                                  >>>
                                  >>>>by Australians to Paypal Australia. I'm assuming they were forced
                                  >>>
                                  >>>to by the
                                  >>>
                                  >>>
                                  >>>>Australian Government for tax tracking purposes.
                                  >>>>
                                  >>>>Maybe there is a glitch in their system. The address homann@
                                  >>>>is correct for Paypal transfers.
                                  >>>>
                                  >>>>I'd give it another go.
                                  >>>>
                                  >>>>Or, what about this, I'll send you the DigiSpeed (Sherline
                                  >
                                  > version)
                                  >
                                  >>>plus the
                                  >>>
                                  >>>
                                  >>>>MiniDin cable. When you receive it, pay me then. By that time,
                                  >>>
                                  >>>Paypal and
                                  >>>
                                  >>>
                                  >>>>other problems may have sorted themselves out.
                                  >>>>
                                  >>>>Did you receive my test messages sent just over an hour ago?
                                  >>>>
                                  >>>>Cheers,
                                  >>>>
                                  >>>>Peter.
                                  >>>>
                                  >>>>Jim Knighton wrote:
                                  >>>>
                                  >>>>
                                  >>>>>Peter,
                                  >>>>>
                                  >>>>>On the basis of your last post I decided to try the Paypal
                                  >>>
                                  >>>transfer
                                  >>>
                                  >>>
                                  >>>>>to homann@ Unfortunately, now Paypal says that this
                                  >>>>>account is not registered with them. Since other guys have
                                  >
                                  > posted
                                  >
                                  >>>>>here that they have purchased from you via PayPal, it appears
                                  >>>
                                  >>>that
                                  >>>
                                  >>>
                                  >>>>>either you have payments sent to another address that is
                                  >>>
                                  >>>registered
                                  >>>
                                  >>>
                                  >>>>>with them or there is still a problem. On my own from this end I
                                  >>>>>can't discern what is going on...
                                  >>>>>
                                  >>>>>In the various messages that I've sent I've given you my snail
                                  >>>
                                  >>>mail
                                  >>>
                                  >>>
                                  >>>>>address (at least twice) and asked for verification of the email
                                  >>>>>address you prefer for Paypal. I've never received anything from
                                  >>>
                                  >>>you
                                  >>>
                                  >>>
                                  >>>>>so far to suggest that you've received those messages nor has
                                  >>>
                                  >>>there
                                  >>>
                                  >>>
                                  >>>>>been a response to these queries. This latest glitch has me
                                  >>>
                                  >>>nervous
                                  >>>
                                  >>>
                                  >>>>>about proceeding without better validation that if I send the
                                  >>>
                                  >>>money
                                  >>>
                                  >>>
                                  >>>>>you will actually receive it. I'm in a real quandry here as this
                                  >>>>>forum appears to be the only reliable means for communicating
                                  >>>
                                  >>>with
                                  >>>
                                  >>>
                                  >>>>>you.
                                  >>>>>
                                  >>>>>Regards,
                                  >>>>>
                                  >>>>>Jim
                                  >>>>>
                                  >>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@> wrote:
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>Hi Jim,
                                  >>>>>>
                                  >>>>>>I went to bed after sending the first 2 test messages. I just
                                  >>>
                                  >>>sent
                                  >>>
                                  >>>
                                  >>>>>a message
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>to jimknighton@
                                  >>>>>>
                                  >>>>>>I am receiving email from all 3 addresses. You don't seem to be
                                  >>>>>
                                  >>>>>getting my
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>replys sent to jim_knighton@
                                  >>>>>>
                                  >>>>>>Cheers,
                                  >>>>>>
                                  >>>>>>Peter.
                                  >>>>>>
                                  >>>>>>Jim Knighton wrote:
                                  >>>>>>
                                  >>>>>>
                                  >>>>>>
                                  >>>>>>>Peter,
                                  >>>>>>>
                                  >>>>>>>I don't know if you've sent anything, but there hasn't been
                                  >
                                  > any
                                  >
                                  >>>>>email
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>activity on this end for over an hour.
                                  >>>>>>>
                                  >>>>>>>Regards,
                                  >>>>>>>
                                  >>>>>>>Jim
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann <groups@h...>
                                  >>>>>
                                  >>>>>wrote:
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>>Hi Jim,
                                  >>>>>>>>
                                  >>>>>>>>I am receiving your emails. You are not receiving mine??
                                  >>>>>>>>
                                  >>>>>>>>
                                  >>>>>>>>I just replied to your message from jimknighton@g...
                                  >
                                  > hopefully
                                  >
                                  >>>>>you
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>>received my reply.
                                  >>>>>>>>
                                  >>>>>>>>Cheers,
                                  >>>>>>>>
                                  >>>>>>>>Peter.
                                  >>>>>>>>
                                  >>>>>>>>
                                  >>>>>>>>Jim Knighton wrote:
                                  >>>>>>>>
                                  >>>>>>>>
                                  >>>>>>>>
                                  >>>>>>>>
                                  >>>>>>>>>Peter,
                                  >>>>>>>>>
                                  >>>>>>>>>I've sent you several emails now, including one each on the
                                  >>>
                                  >>>last
                                  >>>
                                  >>>
                                  >>>>>>>two
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>days. It appears that you aren't receiving them. I did get
                                  >
                                  > one
                                  >
                                  >>>>>>>email
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>from you a couple of days ago, to which I responded. I don't
                                  >>>>>
                                  >>>>>know
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>>>what is going on... With the messages I've sent you I've
                                  >
                                  > never
                                  >
                                  >>>>>>>>>recieved an "undelivered" message, so from all I see it
                                  >
                                  > looks
                                  >
                                  >>>>>>>like
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>they are sent and received.
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>I changed my ISP a couple of months ago and also updated my
                                  >>>>>>>
                                  >>>>>>>profile
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>here in Yahoo to reflect that change. Sometimes, however,
                                  >
                                  > the
                                  >
                                  >>>>>old
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>>>email address still pops up. I don't know why or how to fix
                                  >>>
                                  >>>it.
                                  >>>
                                  >>>
                                  >>>>>>>>>Will you please confirm your email address and maybe give me
                                  >>>
                                  >>>an
                                  >>>
                                  >>>
                                  >>>>>>>>>alternative if you have one?
                                  >>>>>>>>>
                                  >>>>>>>>>Until we get the communications working right it seems a bit
                                  >>>>>>>>>foolhardy to attempt a Paypal transfer although I'm ready
                                  >
                                  > and
                                  >
                                  >>>>>>>willing
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>to do so. I don't want to do a transfer only to have it fall
                                  >>>>>
                                  >>>>>into
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>a
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>black hole somewhere. That could cause all sorts of
                                  >>>
                                  >>>frustration
                                  >>>
                                  >>>
                                  >>>>>>>on
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>both ends. Please keep in mind that I really want to
                                  >
                                  > conclude
                                  >
                                  >>>>>>>this
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>transaction, however.
                                  >>>>>>>>>
                                  >>>>>>>>>So, my "real" email address is the one I gave you earlier:
                                  >>>>>>>>>
                                  >>>>>>>>>jim_knighton@m... (The one message I received from you was
                                  >>>
                                  >>>sent
                                  >>>
                                  >>>
                                  >>>>>>>to
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>this address)
                                  >>>>>>>>>
                                  >>>>>>>>>my old and defunct address is:
                                  >>>>>>>>>
                                  >>>>>>>>>jimknighton@w... (don't use this one - that account is
                                  >>>>>>>>>dead. If you have it in your address book, please delete it).
                                  >>>>>>>>>
                                  >>>>>>>>>Here are a couple of "emergency backup" addresses we can try
                                  >>>
                                  >>>as
                                  >>>
                                  >>>
                                  >>>>>>>well:
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>jim_knighton@g...
                                  >>>>>>>>>and
                                  >>>>>>>>>jim_knighton@j...
                                  >>>>>>>>>
                                  >>>>>>>>>I'll make a point of checking these frequently until we get
                                  >>>>>>>
                                  >>>>>>>things
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>sorted out. I've never had this kind of problem before, and
                                  >
                                  > I
                                  >
                                  >>>do
                                  >>>
                                  >>>
                                  >>>>>>>a
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>lot of email correspondence with people all around the
                                  >
                                  > world.
                                  >
                                  >>>>>>>This is
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>just crazy, and I don't have a clue which end the problem is
                                  >>>
                                  >>>on.
                                  >>>
                                  >>>
                                  >>>>>>>>>Thanks for being persistent and contacting me this way.
                                  >>>>>>>
                                  >>>>>>>Hopefully, no
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>one else is having this problem.
                                  >>>>>>>>>
                                  >>>>>>>>>Anyway, As soon as this posts I'll send you three test
                                  >>>
                                  >>>messages
                                  >>>
                                  >>>
                                  >>>>>>>from
                                  >>>>>>
                                  >>>>>>
                                  >>>>>>>>>each of the aforementioned active accounts in hopes that
                                  >>>>>>>
                                  >>>>>>>something
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>gets through. If I don't hear back from you "soon" I'll post
                                  >>>>>>>
                                  >>>>>>>another
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>message here to apprise you of that fact. So, here's hoping
                                  >
                                  > we
                                  >
                                  >>>>>>>can
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>sort it out.
                                  >>>>>>>>>
                                  >>>>>>>>>Regards,
                                  >>>>>>>>>
                                  >>>>>>>>>Jim
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann
                                  >
                                  > <groups@h...>
                                  >
                                  >>>>>>>wrote:
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>>Hi Jim,
                                  >>>>>>>>>>
                                  >>>>>>>>>>An email I sent you on the 29th has been undelivered with
                                  >
                                  > the
                                  >
                                  >>>>>>>>>message;
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>>-------------------------
                                  >>>>>>>>>>This is the Postfix program at host webrdr.connect.com.au.
                                  >>>>>>>>>>
                                  >>>>>>>>>>I'm sorry to have to inform you that the message returned
                                  >>>>>>>>>>below could not be delivered to one or more destinations.
                                  >>>>>>>>>>
                                  >>>>>>>>>>For further assistance, please send mail to <postmaster>
                                  >>>>>>>>>>
                                  >>>>>>>>>>If you do so, please include this problem report. You can
                                  >>>>>>>>>>delete your own text from the message returned below.
                                  >>>>>>>>>>
                                  >>>>>>>>>> The Postfix program
                                  >>>>>>>>>>
                                  >>>>>>>>>><jim_knighton@m...>: connect to mx3.hotmail.com
                                  >>>
                                  >>>[65.54.244.200]:
                                  >>>
                                  >>>
                                  >>>>>>>>>Connection
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>> timed out
                                  >>>>>>>>>>
                                  >>>>>>>>>>---------------------------
                                  >>>>>>>>>>
                                  >>>>>>>>>>I sent you an email this morning. Did you receive it?
                                  >>>>>>>>>>
                                  >>>>>>>>>>Do you have another Enail address I can use?
                                  >>>>>>>>>>
                                  >>>>>>>>>>I can supply the DigiSpeed plus cable. The cost is 71.00
                                  >>>>>>>
                                  >>>>>>>including
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>postage.
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>>I presume it is for installation in a Sherline DC motor
                                  >>>>>>>
                                  >>>>>>>controller
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>housing?
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>>Cheers,
                                  >>>>>>>>>>
                                  >>>>>>>>>>Peter.
                                  >>>>>>>>>>
                                  >>>>>>>>>>
                                  >>>>>>>>>>Jim Knighton wrote:
                                  >>>>>>>>>>
                                  >>>>>>>>>>
                                  >>>>>>>>>>
                                  >>>>>>>>>>
                                  >>>>>>>>>>
                                  >>>>>>>>>>>Hi Peter...
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>I want to buy a Digispeed controller and also the MiniDin
                                  >>>>>
                                  >>>>>cable.
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>>>In
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>>>as much as payment will be via paypal I sent you an email
                                  >
                                  > to
                                  >
                                  >>>>>>>this
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>>>effect via the link on your web site. I guess it never
                                  >
                                  > went
                                  >
                                  >>>>>>>>>through.
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>>>Anyway, it's for a small Sherline lathe with PMDX
                                  >>>
                                  >>>electronics
                                  >>>
                                  >>>
                                  >>>>>>>>>running
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>>>Mach 3 software. I'm assuming that since others are using
                                  >>>
                                  >>>Mach
                                  >>>
                                  >>>
                                  >>>>>3
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>>>the
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>>>setup is manageable. My thought was to run the cable
                                  >
                                  > (minus
                                  >
                                  >>>>>one
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>>>end)
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>>>directly to my PMDX breakout board. I'm not sure how to
                                  >>>>>>>
                                  >>>>>>>configure
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>>>Mach, but I suppose I'll sort it out soon enough.
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>Contact me at jim_knighton@m...
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>Regards,
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>Jim
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>--- In SherlineCNC@yahoogroups.com, Peter Homann
                                  >>>
                                  >>><groups@h...>
                                  >>>
                                  >>>
                                  >>>>>>>>>wrote:
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>>>>Hi Jim,
                                  >>>>>>>>>>>>
                                  >>>>>>>>>>>>I'm here. Don't recall seeing an email from you.
                                  >>>>>>>>>>>>
                                  >>>>>>>>>>>>How can I help.
                                  >>>>>>>>>>>>
                                  >>>>>>>>>>>>Cheers,
                                  >>>>>>>>>>>>
                                  >>>>>>>>>>>>
                                  >>>>>>>>>>>>Peter.
                                  >>>>>>>>>>>>
                                  >>>>>>>>>>>>
                                  >>>>>>>>>>>>Jim Knighton wrote:
                                  >>>>>>>>>>>>
                                  >>>>>>>>>>>>
                                  >>>>>>>>>>>>
                                  >>>>>>>>>>>>
                                  >>>>>>>>>>>>
                                  >>>>>>>>>>>>
                                  >>>>>>>>>>>>>Is there a US source for Peter Homann's Digispeed
                                  >>>>>
                                  >>>>>controller?
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>>>>>I've
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>>>tried contacting him (last week) directly via his web
                                  >
                                  > site
                                  >
                                  >>>>>but
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>>>so
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>>>far
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>>>there hasn't been a response. Any thoughts?
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>Regards,
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>Jim
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>Yahoo! Groups Links
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>>
                                  >>>>>>>>>>>>
                                  >>>>>>>>>>>>--
                                  >>>>>>>>>>>>----------------------------------------------------------
                                  >
                                  > --
                                  >
                                  >>>--
                                  >>>
                                  >>>
                                  >>>>>--
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>--
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>>>>Web: www.homanndesigns.com
                                  >>>>>>>>>>>>email: homann@h...
                                  >>>>>>>>>>>>Phone: +61 421 601 665
                                  >>>>>>>>>>>>www.homanndesigns.com/ModIO.html - Modbus
                                  >
                                  > Interface
                                  >
                                  >>>>>Unit
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle
                                  >>>
                                  >>>control
                                  >>>
                                  >>>
                                  >>>>>>>>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill
                                  >>>
                                  >>>Upgrade
                                  >>>
                                  >>>
                                  >>>>>>>board
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>Yahoo! Groups Links
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>>
                                  >>>>>>>>>>
                                  >>>>>>>>>>--
                                  >>>>>>>>>>------------------------------------------------------------
                                  >
                                  > --
                                  >
                                  >>>--
                                  >>>
                                  >>>
                                  >>>>>--
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>>>>Web: www.homanndesigns.com
                                  >>>>>>>>>>email: homann@h...
                                  >>>>>>>>>>Phone: +61 421 601 665
                                  >>>>>>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface
                                  >>>
                                  >>>Unit
                                  >>>
                                  >>>
                                  >>>>>>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle
                                  >
                                  > control
                                  >
                                  >>>>>>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill
                                  >
                                  > Upgrade
                                  >
                                  >>>>>board
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>Yahoo! Groups Links
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>>
                                  >>>>>>>>
                                  >>>>>>>>--
                                  >>>>>>>>--------------------------------------------------------------
                                  >
                                  > --
                                  >
                                  >>>--
                                  >>>
                                  >>>
                                  >>>>>>>>Web: www.homanndesigns.com
                                  >>>>>>>>email: homann@h...
                                  >>>>>>>>Phone: +61 421 601 665
                                  >>>>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface
                                  >
                                  > Unit
                                  >
                                  >>>>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                                  >>>>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                                  >>>
                                  >>>board
                                  >>>
                                  >>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>Yahoo! Groups Links
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>>
                                  >>>>>>
                                  >>>>>>--
                                  >>>>>>----------------------------------------------------------------
                                  >
                                  > --
                                  >
                                  >>>>>>Web: www.homanndesigns.com
                                  >>>>>>email: homann@
                                  >>>>>>Phone: +61 421 601 665
                                  >>>>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                                  >>>>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                                  >>>>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade
                                  >
                                  > board
                                  >
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>Yahoo! Groups Links
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>>
                                  >>>>
                                  >>>>--
                                  >>>>------------------------------------------------------------------
                                  >>>>Web: www.homanndesigns.com
                                  >>>>email: homann@
                                  >>>>Phone: +61 421 601 665
                                  >>>>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                                  >>>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                                  >>>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                                  >>>>
                                  >>>
                                  >>>
                                  >>>
                                  >>>
                                  >>>
                                  >>>
                                  >>>
                                  >>>
                                  >>>
                                  >>>Yahoo! Groups Links
                                  >>>
                                  >>>
                                  >>>
                                  >>>
                                  >>>
                                  >>>
                                  >>>
                                  >>
                                  >>--
                                  >>------------------------------------------------------------------
                                  >>Web: www.homanndesigns.com
                                  >>email: homann@...
                                  >>Phone: +61 421 601 665
                                  >>www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                                  >>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                                  >>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                                  >>
                                  >
                                  >
                                  >
                                  >
                                  >
                                  >
                                  >
                                  >
                                  > Yahoo! Groups Links
                                  >
                                  >
                                  >
                                  >
                                  >
                                  >
                                  >
                                  >

                                  --
                                  ------------------------------------------------------------------
                                  Web: www.homanndesigns.com
                                  email: homann@...
                                  Phone: +61 421 601 665
                                  www.homanndesigns.com/ModIO.html - Modbus Interface Unit
                                  www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
                                  www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
                                • Ron Ginger
                                  Am I happy to hear this transaction is complete- with 11 levels of quoted messages nested inside the last one! Useless quoting is one of my pet peeves, and
                                  Message 16 of 24 , Feb 1, 2006
                                  • 0 Attachment
                                    Am I happy to hear this transaction is complete- with 11 levels of
                                    quoted messages nested inside the last one!

                                    Useless quoting is one of my pet peeves, and this thread is just about
                                    the worst case Ive seen.

                                    ron ginger
                                  Your message has been successfully submitted and would be delivered to recipients shortly.