Loading ...
Sorry, an error occurred while loading the content.

Re: [SherlineCNC] Unable to save configuration into Home directory

Expand Messages
  • JB
    ... Are you running off the BDI? If not, try saving under a slightly modified name, like my mm setup to the Desktop… it looks like you re trying to
    Message 1 of 5 , Apr 30, 2013
    • 0 Attachment
      On Apr 30, 2013, at 9:39 PM, "manfredv1" <manfredv1@...> wrote:

      > insmod: error inserting
      > '/usr/realtime-2.6.32-122-rtai/modules/rtai_hal.ko': -1 File exists
      >
      > 3661


      Are you running off the BDI?

      If not, try saving under a slightly modified name, like "my mm setup" to the Desktop� it looks like you're trying to overwrite a setting file in a protected directory from the install/installer.

      Best of luck,

      JB

      [Non-text portions of this message have been removed]
    • Terry Wellman
      Hi Guys, Has anyone on the list messed around with 5 axis milling on their Sherline or similar equipment? Thanks, Terry Wellman
      Message 2 of 5 , May 1, 2013
      • 0 Attachment
        Hi Guys,

        Has anyone on the list messed around with 5 axis milling on their Sherline or similar equipment?

        Thanks,
        Terry Wellman
      • manfredv1
        Yes, I am running of Brain Dead Install. I found that I had more than one similar file with different names in the config folder. After a bit of reading I
        Message 3 of 5 , May 1, 2013
        • 0 Attachment
          Yes, I am running of Brain Dead Install.

          I found that I had more than one similar file with different names in the config folder.

          After a bit of reading I decided to try the sim axis config from the command line and again LinuxCNC crashed. Below the log file. Again - doesn't help me at all. Any suggestions welcome.

          Manfred

          [ 0.354507] pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
          [ 0.354512] pci 0000:00:01.0: PREFETCH window: 0xf4000000-0xfbffffff
          [ 0.354519] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
          [ 0.354523] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
          [ 0.354529] pci 0000:00:1e.0: MEM window: 0xfe800000-0xfe8fffff
          [ 0.354534] pci 0000:00:1e.0: PREFETCH window: disabled
          [ 0.354553] pci 0000:00:1e.0: setting latency timer to 64
          [ 0.354559] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
          [ 0.354562] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
          [ 0.354566] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
          [ 0.354569] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfeafffff]
          [ 0.354572] pci_bus 0000:01: resource 2 pref mem [0xf4000000-0xfbffffff]
          [ 0.354576] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
          [ 0.354579] pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
          [ 0.354582] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
          [ 0.354585] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
          [ 0.354628] NET: Registered protocol family 2
          [ 0.354754] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
          [ 0.355176] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
          [ 0.356066] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
          [ 0.356645] TCP: Hash tables configured (established 131072 bind 65536)
          [ 0.356649] TCP reno registered
          [ 0.356812] NET: Registered protocol family 1
          [ 0.356932] pci 0000:01:00.0: Boot video device
          [ 0.356949] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
          [ 0.357069] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
          [ 0.357072] Simple Boot Flag at 0x7a set to 0x1
          [ 0.357207] Scanning for low memory corruption every 60 seconds
          [ 0.357331] audit: initializing netlink socket (disabled)
          [ 0.357347] type=2000 audit(1367396979.354:1): initialized
          [ 0.364072] Trying to unpack rootfs image as initramfs...
          [ 0.374561] highmem bounce pool size: 64 pages
          [ 0.374570] HugeTLB registered 4 MB page size, pre-allocated 0 pages
          [ 0.376307] VFS: Disk quotas dquot_6.5.2
          [ 0.376378] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
          [ 0.377098] fuse init (API version 7.13)
          [ 0.377204] msgmni has been set to 1641
          [ 0.382889] alg: No test for stdrng (krng)
          [ 0.382997] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
          [ 0.383002] io scheduler noop registered
          [ 0.383005] io scheduler anticipatory registered
          [ 0.383008] io scheduler deadline registered
          [ 0.383056] io scheduler cfq registered (default)
          [ 0.383203] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
          [ 0.383234] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
          [ 0.383323] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
          [ 0.383333] ACPI: Power Button [VBTN]
          [ 0.383399] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
          [ 0.383403] ACPI: Power Button [PWRF]
          [ 0.385242] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
          [ 0.385346] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
          [ 0.385754] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
          [ 0.387064] brd: module loaded
          [ 0.387640] loop: module loaded
          [ 0.387771] input: Macintosh mouse button emulation as /devices/virtual/input/input2
          [ 0.387899] ata_piix 0000:00:1f.1: version 2.13
          [ 0.387919] alloc irq_desc for 18 on node -1
          [ 0.387922] alloc kstat_irqs on node -1
          [ 0.387933] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
          [ 0.387988] ata_piix 0000:00:1f.1: setting latency timer to 64
          [ 0.388123] isapnp: Scanning for PnP cards...
          [ 0.398457] scsi0 : ata_piix
          [ 0.398618] scsi1 : ata_piix
          [ 0.398660] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
          [ 0.398665] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
          [ 0.398719] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
          [ 0.398726] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
          [ 0.398782] ata_piix 0000:00:1f.2: setting latency timer to 64
          [ 0.398874] scsi2 : ata_piix
          [ 0.399073] scsi3 : ata_piix
          [ 0.399117] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18
          [ 0.399121] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18
          [ 0.399610] Fixed MDIO Bus: probed
          [ 0.399658] PPP generic driver version 2.4.2
          [ 0.399733] tun: Universal TUN/TAP device driver, 1.6
          [ 0.399736] tun: (C) 1999-2004 Max Krasnyansky <maxk@...>
          [ 0.399852] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
          [ 0.399881] alloc irq_desc for 23 on node -1
          [ 0.399885] alloc kstat_irqs on node -1
          [ 0.399893] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
          [ 0.399911] ehci_hcd 0000:00:1d.7: setting latency timer to 64
          [ 0.399916] ehci_hcd 0000:00:1d.7: EHCI Host Controller
          [ 0.399956] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
          [ 0.399995] ehci_hcd 0000:00:1d.7: debug port 1
          [ 0.403876] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
          [ 0.403951] ata2: port disabled. ignoring.
          [ 0.450819] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa80800
          [ 0.470616] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
          [ 0.470797] usb usb1: configuration #1 chosen from 1 choice
          [ 0.470834] hub 1-0:1.0: USB hub found
          [ 0.470849] hub 1-0:1.0: 8 ports detected
          [ 0.470934] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
          [ 0.470956] uhci_hcd: USB Universal Host Controller Interface driver
          [ 0.471013] alloc irq_desc for 16 on node -1
          [ 0.471017] alloc kstat_irqs on node -1
          [ 0.471025] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
          [ 0.471037] uhci_hcd 0000:00:1d.0: setting latency timer to 64
          [ 0.471042] uhci_hcd 0000:00:1d.0: UHCI Host Controller
          [ 0.471094] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
          [ 0.471131] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
          [ 0.471236] usb usb2: configuration #1 chosen from 1 choice
          [ 0.471272] hub 2-0:1.0: USB hub found
          [ 0.471282] hub 2-0:1.0: 2 ports detected
          [ 0.471331] alloc irq_desc for 19 on node -1
          [ 0.471335] alloc kstat_irqs on node -1
          [ 0.471340] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
          [ 0.471348] uhci_hcd 0000:00:1d.1: setting latency timer to 64
          [ 0.471352] uhci_hcd 0000:00:1d.1: UHCI Host Controller
          [ 0.471392] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
          [ 0.471421] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
          [ 0.471522] usb usb3: configuration #1 chosen from 1 choice
          [ 0.471555] hub 3-0:1.0: USB hub found
          [ 0.471566] hub 3-0:1.0: 2 ports detected
          [ 0.471614] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
          [ 0.471622] uhci_hcd 0000:00:1d.2: setting latency timer to 64
          [ 0.471626] uhci_hcd 0000:00:1d.2: UHCI Host Controller
          [ 0.471667] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
          [ 0.471690] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
          [ 0.471796] usb usb4: configuration #1 chosen from 1 choice
          [ 0.471828] hub 4-0:1.0: USB hub found
          [ 0.471838] hub 4-0:1.0: 2 ports detected
          [ 0.471888] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
          [ 0.471896] uhci_hcd 0000:00:1d.3: setting latency timer to 64
          [ 0.471900] uhci_hcd 0000:00:1d.3: UHCI Host Controller
          [ 0.471949] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
          [ 0.471972] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20
          [ 0.472077] usb usb5: configuration #1 chosen from 1 choice
          [ 0.472110] hub 5-0:1.0: USB hub found
          [ 0.472122] hub 5-0:1.0: 2 ports detected
          [ 0.472225] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
          [ 0.472229] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
          [ 0.473008] serio: i8042 KBD port at 0x60,0x64 irq 1
          [ 0.473156] mice: PS/2 mouse device common for all mice
          [ 0.473304] rtc_cmos 00:05: RTC can wake from S4
          [ 0.473360] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
          [ 0.473385] rtc0: alarms up to one day, 242 bytes nvram
          [ 0.473525] device-mapper: uevent: version 1.0.3
          [ 0.476624] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@...
          [ 0.477978] device-mapper: multipath: version 1.1.0 loaded
          [ 0.477983] device-mapper: multipath round-robin: version 1.0.0 loaded
          [ 0.478169] EISA: Probing bus 0 at eisa.0
          [ 0.478205] EISA: Detected 0 cards.
          [ 0.478209] cpuidle: using governor ladder
          [ 0.478211] cpuidle: using governor menu
          [ 0.478748] TCP cubic registered
          [ 0.478909] NET: Registered protocol family 10
          [ 0.479482] lo: Disabled Privacy Extensions
          [ 0.479852] NET: Registered protocol family 17
          [ 0.479907] Using IPI No-Shortcut mode
          [ 0.480042] registered taskstats version 1
          [ 0.480365] rtc_cmos 00:05: setting system clock to 2013-05-01 08:29:40 UTC (1367396980)
          [ 0.480369] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
          [ 0.480372] EDD information not available.
          [ 0.495959] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
          [ 0.571400] ata1.00: ATA-6: IC35L090AVV207-0, V23OA66A, max UDMA/100
          [ 0.571405] ata1.00: 156250000 sectors, multi 8: LBA48
          [ 0.635125] ata1.00: configured for UDMA/100
          [ 1.070251] isapnp: No Plug & Play device found
          [ 1.070290] usb 3-1: new low speed USB device using uhci_hcd and address 2
          [ 1.070464] scsi 0:0:0:0: Direct-Access ATA IC35L090AVV207-0 V23O PQ: 0 ANSI: 5
          [ 1.070676] sd 0:0:0:0: Attached scsi generic sg0 type 0
          [ 1.070796] sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
          [ 1.070864] sd 0:0:0:0: [sda] Write Protect is off
          [ 1.070868] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
          [ 1.070903] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
          [ 1.071087] sda: sda1 sda2 < sda5 sda6 >
          [ 1.113840] sd 0:0:0:0: [sda] Attached SCSI disk
          [ 1.130523] Freeing initrd memory: 12827k freed
          [ 1.266475] usb 3-1: configuration #1 chosen from 1 choice
          [ 2.288134] Freeing unused kernel memory: 620k freed
          [ 2.288821] Write protecting the kernel text: 4540k
          [ 2.288847] Write protecting the kernel read-only data: 1668k
          [ 2.320217] udev: starting version 151
          [ 2.563763] vga16fb: initializing
          [ 2.563769] vga16fb: mapped to 0xc00a0000
          [ 2.563841] fb0: VGA16 VGA frame buffer device
          [ 2.571334] Linux agpgart interface v0.103
          [ 2.584705] Floppy drive(s): fd0 is 1.44M
          [ 2.584881] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
          [ 2.584885] e100: Copyright(c) 1999-2006 Intel Corporation
          [ 2.584932] alloc irq_desc for 20 on node -1
          [ 2.584935] alloc kstat_irqs on node -1
          [ 2.584943] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
          [ 2.607259] e100 0000:02:08.0: PME# disabled
          [ 2.609702] FDC 0 is a post-1991 82077
          [ 2.620201] agpgart-intel 0000:00:00.0: Intel i875 Chipset
          [ 2.629340] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
          [ 2.639368] usbcore: registered new interface driver hiddev
          [ 2.691595] e100: eth0: e100_probe: addr 0xfe8ff000, irq 20, MAC addr 00:07:e9:57:d2:8d
          [ 2.743141] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4
          [ 2.743275] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1/input0
          [ 2.743306] usbcore: registered new interface driver usbhid
          [ 2.743310] usbhid: v2.6:USB HID core driver
          [ 2.750671] Console: switching to colour frame buffer device 80x30
          [ 3.196099] xor: automatically using best checksumming function: pIII_sse
          [ 3.216009] pIII_sse : 3645.000 MB/sec
          [ 3.216012] xor: using function: pIII_sse (3645.000 MB/sec)
          [ 3.240124] device-mapper: dm-raid45: initialized v0.2594b
          [ 3.399814] EXT4-fs (sda5): mounted filesystem with ordered data mode
          [ 12.337100] udev: starting version 151
          [ 12.342940] Adding 1308664k swap on /dev/sda6. Priority:-1 extents:1 across:1308664k
          [ 12.577052] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
          [ 12.590438] intel_rng: Firmware space is locked read-only. If you can't or
          [ 12.590441] intel_rng: don't want to disable this in firmware setup, and if
          [ 12.590443] intel_rng: you are certain that your system has a functional
          [ 12.590445] intel_rng: RNG, try using the 'no_fwh_detect' option.
          [ 12.611665] lp: driver loaded but no devices found
          [ 12.862351] parport_pc 00:09: reported by Plug and Play ACPI
          [ 12.862402] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
          [ 12.866320] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
          [ 12.867379] dell-wmi: No known WMI GUID found
          [ 12.956270] lp0: using parport0 (interrupt-driven).
          [ 12.985076] ppdev: user-space parallel port driver
          [ 13.020119] gameport: EMU10K1 is pci0000:02:02.1/gameport0, io 0xcf18, speed 1193kHz
          [ 13.119301] type=1505 audit(1367411393.135:2): operation="profile_load" pid=527 name="/sbin/dhclient3"
          [ 13.119884] type=1505 audit(1367411393.135:3): operation="profile_load" pid=527 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
          [ 13.124298] type=1505 audit(1367411393.143:4): operation="profile_load" pid=527 name="/usr/lib/connman/scripts/dhclient-script"
          [ 13.328940] alloc irq_desc for 17 on node -1
          [ 13.328946] alloc kstat_irqs on node -1
          [ 13.328955] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
          [ 13.329007] Intel ICH 0000:00:1f.5: setting latency timer to 64
          [ 13.341018] EMU10K1X 0000:02:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
          [ 13.341056] Model 1003 Rev 00000000 Serial 10031102
          [ 13.578746] type=1505 audit(1367411393.595:5): operation="profile_load" pid=664 name="/usr/share/gdm/guest-session/Xsession"
          [ 13.596326] type=1505 audit(1367411393.615:6): operation="profile_replace" pid=665 name="/sbin/dhclient3"
          [ 13.596937] type=1505 audit(1367411393.615:7): operation="profile_replace" pid=665 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
          [ 13.597272] type=1505 audit(1367411393.615:8): operation="profile_replace" pid=665 name="/usr/lib/connman/scripts/dhclient-script"
          [ 13.650668] type=1505 audit(1367411393.667:9): operation="profile_load" pid=666 name="/usr/bin/evince"
          [ 13.657094] ADDRCONF(NETDEV_UP): eth0: link is not ready
          [ 13.660156] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
          [ 13.660501] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
          [ 13.703583] type=1505 audit(1367411393.719:10): operation="profile_load" pid=666 name="/usr/bin/evince-previewer"
          [ 13.729967] type=1505 audit(1367411393.747:11): operation="profile_load" pid=666 name="/usr/bin/evince-thumbnailer"
          [ 13.768078] intel8x0_measure_ac97_clock: measured 52379 usecs (2524 samples)
          [ 13.768084] intel8x0: clocking to 48000
          [ 14.247491] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
          [ 14.286559] [drm] Initialized drm 1.1.0 20060810
          [ 14.346269] [drm] radeon defaulting to kernel modesetting.
          [ 14.346274] [drm] radeon kernel modesetting enabled.
          [ 14.353637] [drm] radeon: Initializing kernel modesetting.
          [ 14.353725] [drm] register mmio base: 0xFE9E0000
          [ 14.353728] [drm] register mmio size: 65536
          [ 14.354001] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
          [ 14.354019] [drm] Generation 1 PCI interface in multifunction mode
          [ 14.354021] [drm] Limiting VRAM to one aperture
          [ 14.354030] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
          [ 14.354046] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
          [ 14.354054] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
          [ 14.354093] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
          [ 14.354117] [drm] radeon: VRAM 64M
          [ 14.354119] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
          [ 14.354122] [drm] radeon: GTT 64M
          [ 14.354124] [drm] radeon: GTT from 0xF0000000 to 0xF3FFFFFF
          [ 14.354153] [drm] radeon: irq initialized.
          [ 14.354253] [drm] Detected VRAM RAM=64M, BAR=64M
          [ 14.354258] [drm] RAM width 128bits DDR
          [ 14.359192] [TTM] Zone kernel: Available graphics memory: 426886 kiB.
          [ 14.359197] [TTM] Zone highmem: Available graphics memory: 1806962 kiB.
          [ 14.359221] [drm] radeon: 64M of VRAM memory ready
          [ 14.359224] [drm] radeon: 64M of GTT memory ready.
          [ 14.359458] [drm] radeon: cp idle (0x02000603)
          [ 14.359510] [drm] Loading R200 Microcode
          [ 14.359894] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
          [ 14.377822] [drm] radeon: ring at 0x00000000F0000000
          [ 14.377843] [drm] ring test succeeded in 0 usecs
          [ 14.384635] [drm] radeon: ib pool ready.
          [ 14.384728] [drm] ib test succeeded in 0 usecs
          [ 14.384769] [drm] DFP table revision: 3
          [ 14.387245] [drm] Default TV standard: NTSC
          [ 14.387251] [drm] 27.000000000 MHz TV ref clk
          [ 14.387257] [drm] Default TV standard: NTSC
          [ 14.387259] [drm] 27.000000000 MHz TV ref clk
          [ 14.387401] [drm] Radeon Display Connectors
          [ 14.387405] [drm] Connector 0:
          [ 14.387407] [drm] DVI-I
          [ 14.387410] [drm] HPD1
          [ 14.387413] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
          [ 14.387415] [drm] Encoders:
          [ 14.387418] [drm] CRT1: INTERNAL_DAC1
          [ 14.387420] [drm] DFP1: INTERNAL_TMDS1
          [ 14.387422] [drm] Connector 1:
          [ 14.387424] [drm] S-video
          [ 14.387426] [drm] Encoders:
          [ 14.387428] [drm] TV1: INTERNAL_DAC2
          [ 14.580022] [drm] fb mappable at 0xF8040000
          [ 14.580027] [drm] vram apper at 0xF8000000
          [ 14.580030] [drm] size 5242880
          [ 14.580032] [drm] fb depth is 24
          [ 14.580034] [drm] pitch is 5120
          [ 14.598654] fb1: radeondrmfb frame buffer device
          [ 14.598659] registered panic notifier
          [ 14.598668] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
          [ 24.404008] eth0: no IPv6 routers present
          [ 82.509488] I-pipe: Domain RTAI registered.
          [ 82.509498] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
          [ 82.509502] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
          [ 82.509510] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
          [ 82.509513] PIPELINE layers:
          [ 82.509517] f82a5e20 9ac15d93 RTAI 200
          [ 82.509520] c085cb20 0 Linux 100
          [ 82.542882] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
          [ 82.543030] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
          [ 82.543037] RTAI[sched]: hard timer type/freq = APIC/12468630(Hz); default timing: periodic; linear timed lists.
          [ 82.543041] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2792984000 hz.
          [ 82.543044] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
          [ 82.543159] RTAI[usi]: enabled.
          [ 82.657593] RTAI[math]: loaded.
          [ 82.914428] config string '0x0378'
          [ 84.107385] __ratelimit: 9 callbacks suppressed
          [ 84.107392] axis[1513]: segfault at 4 ip 00d44ef6 sp bfebbfb0 error 4 in libGL.so.1.2[cdf000+a7000]
          [ 84.733452] RTAI[math]: unloaded.
          [ 84.805616] SCHED releases registered named ALIEN RTGLBH
          [ 84.820928] RTAI[malloc]: unloaded.
          [ 84.920019] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
          [ 84.924290] I-pipe: Domain RTAI unregistered.
          [ 84.924302] RTAI[hal]: unmounted.
          [ 165.735007] I-pipe: Domain RTAI registered.
          [ 165.735017] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
          [ 165.735021] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
          [ 165.735030] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
          [ 165.735033] PIPELINE layers:
          [ 165.735036] f8847e20 9ac15d93 RTAI 200
          [ 165.735040] c085cb20 0 Linux 100
          [ 165.763233] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
          [ 165.763382] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
          [ 165.763388] RTAI[sched]: hard timer type/freq = APIC/12468630(Hz); default timing: periodic; linear timed lists.
          [ 165.763393] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2792984000 hz.
          [ 165.763396] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
          [ 165.763510] RTAI[usi]: enabled.
          [ 165.865093] RTAI[math]: loaded.
          [ 165.970511] config string '0x0378'
          [ 166.724074] axis[1766]: segfault at 4 ip 00b5fef6 sp bffb8500 error 4 in libGL.so.1.2[afa000+a7000]
          [ 167.273996] RTAI[math]: unloaded.
          [ 167.347862] SCHED releases registered named ALIEN RTGLBH
          [ 167.361170] RTAI[malloc]: unloaded.
          [ 167.460019] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
          [ 167.464226] I-pipe: Domain RTAI unregistered.
          [ 167.464240] RTAI[hal]: unmounted.
          [ 436.095669] firefox[2103]: segfault at 4 ip 0995aef6 sp bf9a33e0 error 4 in libGL.so.1.2[98f5000+a7000]
          [ 436.176151] firefox[2106]: segfault at 4 ip 13622ef6 sp bf816df0 error 4 in libGL.so.1.2[135bd000+a7000]
          [ 1028.537626] gnome-screensav[2193]: segfault at 4 ip 0088eef6 sp bffe4c80 error 4 in libGL.so.1.2[829000+a7000]
          [38166.089425] I-pipe: Domain RTAI registered.
          [38166.089435] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
          [38166.089438] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
          [38166.089446] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
          [38166.089449] PIPELINE layers:
          [38166.089453] f9930e20 9ac15d93 RTAI 200
          [38166.089456] c085cb20 0 Linux 100
          [38166.119421] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
          [38166.119565] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
          [38166.119572] RTAI[sched]: hard timer type/freq = APIC/12468630(Hz); default timing: periodic; linear timed lists.
          [38166.119576] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2792984000 hz.
          [38166.119579] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
          [38166.119695] RTAI[usi]: enabled.
          [38166.234594] RTAI[math]: loaded.
          [38166.352824] config string '0x0378'
          [38167.134996] axis[2408]: segfault at 4 ip 0082eef6 sp bfb29dd0 error 4 in libGL.so.1.2[7c9000+a7000]
          [38167.761711] RTAI[math]: unloaded.
          [38167.837836] SCHED releases registered named ALIEN RTGLBH
          [38167.853479] RTAI[malloc]: unloaded.
          [38167.952019] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
          [38167.955997] I-pipe: Domain RTAI unregistered.
          [38167.956036] RTAI[hal]: unmounted.
          [38322.602704] I-pipe: Domain RTAI registered.
          [38322.602715] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
          [38322.602718] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
          [38322.602726] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
          [38322.602729] PIPELINE layers:
          [38322.602733] f9f8ce20 9ac15d93 RTAI 200
          [38322.602736] c085cb20 0 Linux 100
          [38322.631397] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
          [38322.631558] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
          [38322.631565] RTAI[sched]: hard timer type/freq = APIC/12468630(Hz); default timing: periodic; linear timed lists.
          [38322.631569] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2792984000 hz.
          [38322.631572] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
          [38322.631688] RTAI[usi]: enabled.
          [38322.743326] RTAI[math]: loaded.
          [38357.731806] RTAI[math]: unloaded.
          [38357.836432] SCHED releases registered named ALIEN RTGLBH
          [38357.852366] RTAI[malloc]: unloaded.
          [38357.952029] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
          [38357.960115] I-pipe: Domain RTAI unregistered.
          [38357.960128] RTAI[hal]: unmounted.
          [38437.476107] I-pipe: Domain RTAI registered.
          [38437.476115] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
          [38437.476119] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
          [38437.476126] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
          [38437.476129] PIPELINE layers:
          [38437.476133] fa306e20 9ac15d93 RTAI 200
          [38437.476136] c085cb20 0 Linux 100
          [38437.504213] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
          [38437.504353] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
          [38437.504359] RTAI[sched]: hard timer type/freq = APIC/12468630(Hz); default timing: periodic; linear timed lists.
          [38437.504364] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2792984000 hz.
          [38437.504367] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
          [38437.504483] RTAI[usi]: enabled.
          [38437.606448] RTAI[math]: loaded.
          [38437.711419] config string '0x0378'
          [38438.476562] axis[2955]: segfault at 4 ip 00d30ef6 sp bffe9610 error 4 in libGL.so.1.2[ccb000+a7000]
          [38439.093331] RTAI[math]: unloaded.
          [38439.166720] SCHED releases registered named ALIEN RTGLBH
          [38439.181163] RTAI[malloc]: unloaded.
          [38439.280080] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
          [38439.284262] I-pipe: Domain RTAI unregistered.
          [38439.284275] RTAI[hal]: unmounted.
          [38555.744505] firefox[3060]: segfault at 4 ip 127a4ef6 sp bfceb690 error 4 in libGL.so.1.2[1273f000+a7000]
          [38927.438785] I-pipe: Domain RTAI registered.
          [38927.438795] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
          [38927.438798] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
          [38927.438806] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
          [38927.438810] PIPELINE layers:
          [38927.438813] fa962e20 9ac15d93 RTAI 200
          [38927.438817] c085cb20 0 Linux 100
          [38927.467600] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
          [38927.467748] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
          [38927.467754] RTAI[sched]: hard timer type/freq = APIC/12468630(Hz); default timing: periodic; linear timed lists.
          [38927.467759] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2792984000 hz.
          [38927.467762] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
          [38927.467879] RTAI[usi]: enabled.
          [38927.569785] RTAI[math]: loaded.
          [38928.857120] axis[3288]: segfault at 4 ip 00a45ef6 sp bfacd5d0 error 4 in libGL.so.1.2[9e0000+a7000]
          [38929.580426] RTAI[math]: unloaded.
          [38929.655325] SCHED releases registered named ALIEN RTGLBH
          [38929.669163] RTAI[malloc]: unloaded.
          [38929.768018] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
          [38929.772290] I-pipe: Domain RTAI unregistered.
          [38929.772302] RTAI[hal]: unmounted.
          lab@lab-desktop:~$


          --- In SherlineCNC@yahoogroups.com, JB <jambomac@...> wrote:
          >
          > On Apr 30, 2013, at 9:39 PM, "manfredv1" <manfredv1@...> wrote:
          >
          > > insmod: error inserting
          > > '/usr/realtime-2.6.32-122-rtai/modules/rtai_hal.ko': -1 File exists
          > >
          > > 3661
          >
          >
          > Are you running off the BDI?
          >
          > If not, try saving under a slightly modified name, like "my mm setup" to the Desktop… it looks like you're trying to overwrite a setting file in a protected directory from the install/installer.
          >
          > Best of luck,
          >
          > JB
          >
          > [Non-text portions of this message have been removed]
          >
        • jowhowho
          Sort of. I run two rotary tables on my mill, but they re not arranged or used in the normal 5-axis way. The program has no idea what I m doing and the
          Message 4 of 5 , May 2, 2013
          • 0 Attachment
            Sort of. I run two rotary tables on my mill, but they're not arranged or used in the normal "5-axis" way. The program has no idea what I'm doing and the graphics on the screen are all screwed up, but it works for me for now. I just gcode the xyzab moves and they move. If I had the time, I'd figure out how to get EMC2/LinuxCNC to understand.

            --Justin


            --- In SherlineCNC@yahoogroups.com, Terry Wellman <scmodelworks@...> wrote:
            >
            > Hi Guys,
            >
            > Has anyone on the list messed around with 5 axis milling on their Sherline or similar equipment?
            >
            > Thanks,
            > Terry Wellman
            >
          Your message has been successfully submitted and would be delivered to recipients shortly.