Loading ...
Sorry, an error occurred while loading the content.

Re: [SherlineCNC] New Sherline CNC group

Expand Messages
  • KM6VV
    Hi Martin, I use Vector CAD/CAM. A now-old version, 10.0 as I remember. It will run under Windoz 7, but has to be invoked under admin privileges. I should
    Message 1 of 28 , Feb 11, 2013
    • 0 Attachment
      Hi Martin,

      I use Vector CAD/CAM. A now-old version, 10.0 as I remember. It will
      run under Windoz 7, but has to be invoked under admin privileges. I
      should check out the current version!

      http://www.cadcamcadcam.com/

      Alan KM6VV

      On 2/11/2013 4:18 PM, Martin Dobbins wrote:
      > Hi Alan,
      >
      > Which package is that? I just had a peek at his website and he sells a number of different ones.
      >
      > Martin
      >
      >
      >
    • kungfumachinist
      ... I just left the other group this morning because of him. PLEASE don t merge the groups... /Daryl
      Message 2 of 28 , Feb 11, 2013
      • 0 Attachment
        --- In SherlineCNC@yahoogroups.com, "Hamilton Elliott" wrote:
        > The other list unfortunately has one member in particular who seems to enjoy causing dissention

        I just left the other group this morning because of him. PLEASE don't merge the groups...

        /Daryl
      • R.L. Wurdack
        First principles would indicate that whatever is not hacking it. ... From: KM6VV To: SherlineCNC@yahoogroups.com Sent: Monday, February 11, 2013 1:44 PM
        Message 3 of 28 , Feb 11, 2013
        • 0 Attachment
          First principles would indicate that "whatever" is not hacking it.

          ----- Original Message -----
          From: KM6VV
          To: SherlineCNC@yahoogroups.com
          Sent: Monday, February 11, 2013 1:44 PM
          Subject: Re: [SherlineCNC] New Sherline CNC group



          Hi Martin,

          I recall that Fred had said he was in contact with John, I can contact
          him for a Health and Welfare report.

          Alan KM6VV

          On 2/11/2013 12:22 PM, Martin Dobbins wrote:
          > Hi Alan,
          >
          > I hope John isn't ill. In case you are not aware Fred Smith (Im Service) posted a message to the Sherline group in early January indicating he was in touch with John and said he expected to be be back again "within a few days". Fred made it clear that he was not going to share John's contact details with anyone at that time. I don't know if you are prepared to go so far as a private message to Fred, but at least that might reassure us that John is not ill even if it does not elicit up to date contact information for you.
          >
          > Martin
          >
          >




          [Non-text portions of this message have been removed]
        • Mike Bauers
          Try -very- hard to ignore him........ You ll be happier. Best to ya... Mike Bauers Milwaukee, Wi, USA
          Message 4 of 28 , Feb 11, 2013
          • 0 Attachment
            Try -very- hard to ignore him........

            You'll be happier.

            Best to ya...
            Mike Bauers
            Milwaukee, Wi, USA



            On Feb 11, 2013, at 6:37 PM, "kungfumachinist" <kungfumachinist@...> wrote:

            >
            >
            > --- In SherlineCNC@yahoogroups.com, "Hamilton Elliott" wrote:
            >> The other list unfortunately has one member in particular who seems to enjoy causing dissention
            >
            > I just left the other group this morning because of him. PLEASE don't merge the groups...
            >
            > /Daryl
          • Tom Wade
            Okay, Dave, maybe i really am confused...... Glad to hear that you are still alive and kicking. Tom
            Message 5 of 28 , Feb 11, 2013
            • 0 Attachment
              Okay, Dave, maybe i really am confused......

              Glad to hear that you are still alive and kicking.

              Tom


              On 2/11/2013 12:27 PM, Dave Hylands wrote:
              >
              > Hi Tom,
              >
              > On Mon, Feb 11, 2013 at 4:21 AM, arcmaster3 tom@...
              > <mailto:tom%40wade.name>> wrote:
              >
              > > As the moderator of the SherlineCNC group has been missing for more
              > than a
              > > year, this group is effectively closed to new members.
              > >
              >
              > I think you mean that the moderator of the Sherline group has been missing
              > for more than a year. The moderators of the SherlineCNC group have been
              > present and active (I'm one of them, so I know).
              >
              > > The Sherline-CNC group has been started to try and get more online
              > support
              > > for Sherline CNC users.
              > >
              > > Please go to
              > >
              > > http://groups.yahoo.com/group/Sherline-CNC/?yguid=286785310
              > >
              > > to sign up for the new group.
              > >
              >
              > I don't think that creating a new Sherline-CNC group is the right thing to
              > do, since the existing group is operating quite well.
              >
              > Dave Hylands - Moderator of SherlineCNC
              >
              > [Non-text portions of this message have been removed]
              >
              >
            • Tom Wade
              Sam, I m not trying to create any political strife here. If I m wrong, and the SherlineCNC group is still going strong, I ll shut down the group. Don t know
              Message 6 of 28 , Feb 11, 2013
              • 0 Attachment
                Sam,

                I'm not trying to create any political strife here.

                If I'm wrong, and the SherlineCNC group is still going strong, I'll shut
                down the group. Don't know how to merge the two of them, if it is even
                possible.

                Tom Wade


                On 2/11/2013 12:42 PM, Sam Marrocco wrote:
                >
                >
                > On 2/11/2013 12:27 PM, Dave Hylands wrote:
                > >
                > >
                > >
                > > I don't think that creating a new Sherline-CNC group is the right
                > thing to
                > > do, since the existing group is operating quite well.
                > >
                >
                > As a new user who doesn't know the history of the two (or more) groups,
                > would it be worth considering merging the two groups into SherlineCNC
                > for simplification? This is, of course assuming that the Sherline news
                > list moderator gives a go-ahead.
                >
                > As a member of many newsgroups over the years I've experienced the
                > splintering and cross-posting that separate groups can cause. Although
                > people will always complain about having too many postings to "wade"
                > through I've found that there is nothing like a good subject header to
                > prevent me from reading anything I don't care about.
                >
                > Sam Marrocco
                > Chief Technical Officer
                > 248-548-2500 Main
                > 248-910-3344 Cell
                >
                > "Just because no one understands you doesn't make you an artist."
                >
                > RINGSIDE CREATIVE | INTEGRATED MEDIA STUDIO™
                > http://www.ringsidecreative.com
                >
                > Find us on Facebook.
                >
                > Please consider the environment before printing this email.
                >
                >
                > [Non-text portions of this message have been removed]
                >
                >
              • Tom Wade
                I may be totally confused herer. I may well have confused the two lists. This happens when you re receiving over 300 emails per day. I am NOT trying to create
                Message 7 of 28 , Feb 11, 2013
                • 0 Attachment
                  I may be totally confused herer. I may well have confused the two lists.
                  This happens when you're receiving over 300 emails per day.

                  I am NOT trying to create any strife here. If I've created the new group
                  in error, I will most likely just shut it down.

                  Tom Wade



                  On 2/11/2013 12:48 PM, KM6VV wrote:
                  >
                  > Tom Wade,
                  >
                  > What are you talking about! We have two active moderators on
                  > SherlineCNC, Dave and I. You'd know that if you'd been reading the
                  > posts. Or if you'd bothered to email the moderators.
                  >
                  > Alan KM6VV
                  > Owner/Moderator
                  >
                  > On 2/11/2013 4:21 AM, arcmaster3 wrote:
                  > > As the moderator of the SherlineCNC group has been missing for more
                  > than a year, this group is effectively closed to new members.
                  > >
                  > > The Sherline-CNC group has been started to try and get more online
                  > support for Sherline CNC users.
                  > >
                  > > Please go to
                  > >
                  > > http://groups.yahoo.com/group/Sherline-CNC/?yguid=286785310
                  > >
                  > > to sign up for the new group.
                  > >
                  > > Tom Wade
                  > > Moderator
                  > >
                  > >
                  > >
                  > >
                  > > ------------------------------------
                  > >
                  > > Yahoo! Groups Links
                  > >
                  > >
                  > >
                  > >
                  >
                  >
                • Carl Carlsen
                  To put it very bluntly, YES you ARE screwed up Tom. There is nothing wrong with this group ....THE CNC GROUP. If it wasn t here or wasn t working, we would
                  Message 8 of 28 , Feb 11, 2013
                  • 0 Attachment
                    To put it very bluntly, YES you ARE screwed up Tom.

                    There is nothing wrong with this group ....THE CNC GROUP. If it wasn't
                    here or wasn't working, we would not be able to make these posts AND read
                    them.

                    It is the "regular" Sherline group that is giving us problems. And YES
                    again, there is no need for the new CNC group you have created and you would
                    do us all a great favor if you would shut it down!

                    Carl




                    -----Original Message-----
                    From: SherlineCNC@yahoogroups.com [mailto:SherlineCNC@yahoogroups.com] On
                    Behalf Of Tom Wade
                    Sent: Monday, February 11, 2013 8:16 PM
                    To: SherlineCNC@yahoogroups.com
                    Subject: Re: [SherlineCNC] New Sherline CNC group

                    I may be totally confused herer. I may well have confused the two lists.
                    This happens when you're receiving over 300 emails per day.

                    I am NOT trying to create any strife here. If I've created the new group in
                    error, I will most likely just shut it down.

                    Tom Wade



                    On 2/11/2013 12:48 PM, KM6VV wrote:
                    >
                    > Tom Wade,
                    >
                    > What are you talking about! We have two active moderators on
                    > SherlineCNC, Dave and I. You'd know that if you'd been reading the
                    > posts. Or if you'd bothered to email the moderators.
                    >
                    > Alan KM6VV
                    > Owner/Moderator
                    >
                    > On 2/11/2013 4:21 AM, arcmaster3 wrote:
                    > > As the moderator of the SherlineCNC group has been missing for more
                    > than a year, this group is effectively closed to new members.
                    > >
                    > > The Sherline-CNC group has been started to try and get more online
                    > support for Sherline CNC users.
                    > >
                    > > Please go to
                    > >
                    > > http://groups.yahoo.com/group/Sherline-CNC/?yguid=286785310
                    > >
                    > > to sign up for the new group.
                    > >
                    > > Tom Wade
                    > > Moderator
                    > >
                    > >
                    > >
                    > >
                    > > ------------------------------------
                    > >
                    > > Yahoo! Groups Links
                    > >
                    > >
                    > >
                    > >
                    >
                    >



                    ------------------------------------

                    Yahoo! Groups Links



                    -----
                    No virus found in this message.
                    Checked by AVG - www.avg.com
                    Version: 2012.0.2238 / Virus Database: 2639/5598 - Release Date: 02/11/13
                  • S or J
                    Hi Folks I guess Tom confused which group was in trouble, and he tried to do something about it, which was in error but admirable for motive. Obvious now, as
                    Message 9 of 28 , Feb 13, 2013
                    • 0 Attachment
                      Hi Folks

                      I guess Tom confused which group was in trouble, and he tried to do something about it, which was in error but admirable for motive.

                      Obvious now, as Dave Hylands has confirmed, SherlineCNC is alive and well and finely moderated.

                      Like many of you here, I followed the other group for many years until it went out of control. I don't read it any more.

                      So despite having a manual Sherline mill, I found that manual mill or lathe users were very well served by the SherlineCNC group.

                      After all, a CNC setup is largely an add on to a manual machine, and the manual portions of a CNC machine's needs still require solutions, tips, and help.

                      My concern would be for the new owner of a manual Sherline machine, who on looking for a Yahoo support group, will erroneously think that the SherlineCNC group is not the one he wants.

                      Meanwhile, if Sherline owners want to read many prior discussions without the hassle and excess baggage found in an archive search, they can simply read or download the appropriate files from my website.

                      Life is never perfect, but we all try as best we can.

                      Regards
                      Steve -- in Thunder Bay, Ontario, Canada
                      Machining and Metalworking at Home
                      http://www.janellestudio.com/metal/



                      [Non-text portions of this message have been removed]
                    • KM6VV
                      Yes Steve, I can confirm that the SherlineCNC list is alive and well! Almost 10 years now. Non-CNC users are still welcome! And we would delight in
                      Message 10 of 28 , Feb 13, 2013
                      • 0 Attachment
                        Yes Steve,

                        I can confirm that the SherlineCNC list is alive and well! Almost 10
                        years now.

                        Non-CNC users are still welcome! And we would delight in discussing
                        machining on either CNC'd or manual mills and lathes. What we won't
                        permit is the noise that is on the other list. I hope John gets back!
                        (I haven't heard back from Fred).

                        Alan KM6VV
                        List Owner

                        On 2/13/2013 7:45 AM, S or J wrote:
                        > Hi Folks
                        >
                        > I guess Tom confused which group was in trouble, and he tried to do something about it, which was in error but admirable for motive.
                        >
                        > Obvious now, as Dave Hylands has confirmed, SherlineCNC is alive and well and finely moderated.
                        >
                        > Like many of you here, I followed the other group for many years until it went out of control. I don't read it any more.
                        >
                        > So despite having a manual Sherline mill, I found that manual mill or lathe users were very well served by the SherlineCNC group.
                        >
                        > After all, a CNC setup is largely an add on to a manual machine, and the manual portions of a CNC machine's needs still require solutions, tips, and help.
                        >
                        > My concern would be for the new owner of a manual Sherline machine, who on looking for a Yahoo support group, will erroneously think that the SherlineCNC group is not the one he wants.
                        >
                        > Meanwhile, if Sherline owners want to read many prior discussions without the hassle and excess baggage found in an archive search, they can simply read or download the appropriate files from my website.
                        >
                        > Life is never perfect, but we all try as best we can.
                        >
                        > Regards
                        > Steve -- in Thunder Bay, Ontario, Canada
                        > Machining and Metalworking at Home
                        > http://www.janellestudio.com/metal/
                        >
                      Your message has been successfully submitted and would be delivered to recipients shortly.