Loading ...
Sorry, an error occurred while loading the content.

Re: [SherlineCNC] New Sherline CNC group

Expand Messages
  • Edmund McHale
    I just came on board.   I am researching equiptment at this time.   Looks like this cnc may be what I should buy ......????   Ed McHale
    Message 1 of 28 , Feb 11 10:19 AM
    • 0 Attachment
      I just came on board.
       
      I am researching equiptment at this time.
       
      Looks like this cnc may be what I should buy ......????
       
      Ed McHale


      ________________________________
      From: Hamilton Elliott <helliott@...>
      To: SherlineCNC@yahoogroups.com
      Sent: Monday, February 11, 2013 1:01 PM
      Subject: RE: [SherlineCNC] New Sherline CNC group


       

      I for one am very happy with having the two lists. This one specialises in the CNC aspect and has a good number of very helpful and knowledgeable people. The other list unfortunately has one member in particular who seems to enjoy causing dissention and because of the lack of an active owner/moderator causes lots of trouble.

      Regards,
      Hamilton

      > -----Original Message-----
      > From: mailto:SherlineCNC%40yahoogroups.com [mailto:mailto:SherlineCNC%40yahoogroups.com] On
      > Behalf Of Sam Marrocco
      > Sent: 11 February 2013 17:43
      > To: mailto:SherlineCNC%40yahoogroups.com
      > Subject: Re: [SherlineCNC] New Sherline CNC group
      >
      >
      > On 2/11/2013 12:27 PM, Dave Hylands wrote:
      > >
      > >
      > >
      > > I don't think that creating a new Sherline-CNC group is the right
      > > thing to do, since the existing group is operating quite well.
      > >
      >
      >
      >
      > As a new user who doesn't know the history of the two (or more) groups, would
      > it be worth considering merging the two groups into SherlineCNC for
      > simplification? This is, of course assuming that the Sherline news list
      > moderator gives a go-ahead.
      >
      > As a member of many newsgroups over the years I've experienced the splintering
      > and cross-posting that separate groups can cause. Although people will always
      > complain about having too many postings to "wade"
      > through I've found that there is nothing like a good subject header to prevent
      > me from reading anything I don't care about.
      >
      >
      >
      >
      > Sam Marrocco
      > Chief Technical Officer
      > 248-548-2500 Main
      > 248-910-3344 Cell
      >
      > "Just because no one understands you doesn't make you an artist."
      >
      > RINGSIDE CREATIVE | INTEGRATED MEDIA STUDIO™ http://www.ringsidecreative.com
      >
      > Find us on Facebook.
      >
      > Please consider the environment before printing this email.
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >



      [Non-text portions of this message have been removed]
    • Hamilton Elliott
      Hi Dave, What I was trying to say is that this group is excellent. The Sherline group needs an active moderator. And there is no need for any other
      Message 2 of 28 , Feb 11 10:23 AM
      • 0 Attachment
        Hi Dave,
        What I was trying to say is that this group is excellent.
        The Sherline group needs an active moderator.
        And there is no need for any other "Sherline....." groups.

        Regards,
        Hamilton


        > -----Original Message-----
        > From: SherlineCNC@yahoogroups.com [mailto:SherlineCNC@yahoogroups.com] On
        > Behalf Of Dave Hylands
        > Sent: 11 February 2013 18:16
        > To: sherlinecnc
        > Subject: Re: [SherlineCNC] New Sherline CNC group
        >
        > Hi Hamilton,
        >
        > On Mon, Feb 11, 2013 at 10:01 AM, Hamilton Elliott
        > <helliott@...>wrote:
        >
        > > I for one am very happy with having the two lists. This one
        > > specialises in the CNC aspect and has a good number of very helpful
        > > and knowledgeable people. The other list unfortunately has one member
        > > in particular who seems to enjoy causing dissention and because of the
        > > lack of an active owner/moderator causes lots of trouble.
        > >
        >
        > I think that there is some confusion happening.
        >
        > There have been the groups Sherline and SherlineCNC for a while.
        >
        > The moderator from the Sherline group has been absent.
        >
        > Recently, Jerry Glickstein created the SherlineAnnex group and Ransome
        > Michasiow created the SherlineMachining group.
        >
        > Tom Wade then went and created Sherline-CNC (notice that it only differs
        from
        > SherlineCNC by the addition of a dash) claiming that the moderators from
        > SherlineCNC have been absent, which is clearly not the case.
        >
        > I would appeal to Tom that the Sherline-CNC group is not necessary and
        will
        > only confuse and fragment the users.
        >
        > Links to the various groups:
        > http://groups.yahoo.com/group/Sherline
        > http://groups.yahoo.com/group/SherlineMachining
        > http://groups.yahoo.com/group/SherlineAnnex
        > http://groups.yahoo.com/group/SherlineCNC
        > http://groups.yahoo.com/group/Sherline-CNC
        >
        > Dave Hylands - SherlineCNC Moderator.
        >
        >
        > [Non-text portions of this message have been removed]
        >
        >
        >
        > ------------------------------------
        >
        > Yahoo! Groups Links
        >
        >
        >
      • KM6VV
        Thanks Hamilton, I feel the same way. I was considering offering to forward posts from prospective Sherline list members to the Sherline list, although I d bet
        Message 3 of 28 , Feb 11 10:32 AM
        • 0 Attachment
          Thanks Hamilton,

          I feel the same way.

          I was considering offering to forward posts from prospective Sherline
          list members to the Sherline list, although I'd bet we could address
          their questions here!

          Anyone with an interest in CNC on the Sherline (don't need to own one)
          can join us, and we enjoy discussing machining questions!

          Thoughts?

          Alan KM6VV

          On 2/11/2013 10:01 AM, Hamilton Elliott wrote:
          > I for one am very happy with having the two lists. This one specialises in the CNC aspect and has a good number of very helpful and knowledgeable people. The other list unfortunately has one member in particular who seems to enjoy causing dissention and because of the lack of an active owner/moderator causes lots of trouble.
          >
          > Regards,
          > Hamilton
          >
          >
          >> -----Original Message-----
          >> From: SherlineCNC@yahoogroups.com [mailto:SherlineCNC@yahoogroups.com] On
          >> Behalf Of Sam Marrocco
          >> Sent: 11 February 2013 17:43
          >> To: SherlineCNC@yahoogroups.com
          >> Subject: Re: [SherlineCNC] New Sherline CNC group
          >>
          >>
          >> On 2/11/2013 12:27 PM, Dave Hylands wrote:
          >>>
          >>>
          >>>
          >>> I don't think that creating a new Sherline-CNC group is the right
          >>> thing to do, since the existing group is operating quite well.
          >>>
          >>
          >>
          >>
          >> As a new user who doesn't know the history of the two (or more) groups, would
          >> it be worth considering merging the two groups into SherlineCNC for
          >> simplification? This is, of course assuming that the Sherline news list
          >> moderator gives a go-ahead.
          >>
          >> As a member of many newsgroups over the years I've experienced the splintering
          >> and cross-posting that separate groups can cause. Although people will always
          >> complain about having too many postings to "wade"
          >> through I've found that there is nothing like a good subject header to prevent
          >> me from reading anything I don't care about.
          >>
          >>
          >>
          >>
          >> Sam Marrocco
          >> Chief Technical Officer
          >> 248-548-2500 Main
          >> 248-910-3344 Cell
          >>
          >> "Just because no one understands you doesn't make you an artist."
          >>
          >> RINGSIDE CREATIVE | INTEGRATED MEDIA STUDIO™ http://www.ringsidecreative.com
          >>
          >> Find us on Facebook.
          >>
          >> Please consider the environment before printing this email.
          >>
          >>
          >>
          >> [Non-text portions of this message have been removed]
          >>
          >>
          >>
          >> ------------------------------------
          >>
          >> Yahoo! Groups Links
          >>
          >>
          >>
          >
          >
          > ------------------------------------
          >
          > Yahoo! Groups Links
          >
          >
          >
          >
        • Carl Carlsen
          You have it backwards Tom! You must be a moderator of THIS group ...which is already CNC? ....and this group doesn t need any fixin . :o) Your new
          Message 4 of 28 , Feb 11 10:34 AM
          • 0 Attachment
            You have it backwards Tom! You must be a moderator of THIS group ...which
            is already CNC? ....and this group doesn't need any "fixin". :o)

            Your new group isn't necessary if you have set up CNC in the title as it
            appears you have!

            I'm not sure that you can now change the name? Seems to me that is a no-no
            for Yahoo? Kill that new one and start one as just CNC ! I'm sure you
            will be getting plenty of mails on this?

            Carl



            _____

            From: SherlineCNC@yahoogroups.com [mailto:SherlineCNC@yahoogroups.com] On
            Behalf Of arcmaster3
            Sent: Monday, February 11, 2013 4:22 AM
            To: SherlineCNC@yahoogroups.com
            Subject: [SherlineCNC] New Sherline CNC group




            As the moderator of the SherlineCNC group has been missing for more than a
            year, this group is effectively closed to new members.

            The Sherline-CNC group has been started to try and get more online support
            for Sherline CNC users.

            Please go to

            http://groups.yahoo.com/group/Sherline-CNC/?yguid=286785310

            to sign up for the new group.

            Tom Wade
            Moderator




            _____

            No virus found in this message.
            Checked by AVG - www.avg.com
            Version: 2012.0.2238 / Virus Database: 2639/5597 - Release Date: 02/11/13



            [Non-text portions of this message have been removed]
          • Martin Dobbins
            Hi Ed, Welcome aboard.  Is this what you should buy.....??  That depends on what you want to make with it (size and complexity), tell us more and someone
            Message 5 of 28 , Feb 11 10:54 AM
            • 0 Attachment
              Hi Ed,

              Welcome aboard. 


              Is this what you should buy.....??  That depends on what you want to make with it (size and complexity), tell us more and someone will help you out.

              Martin



              ________________________________
              From: Edmund McHale
              To: "SherlineCNC@yahoogroups.com" <SherlineCNC@yahoogroups.com>
              Sent: Monday, February 11, 2013 12:19 PM
              Subject: Re: [SherlineCNC] New Sherline CNC group


               
              I just came on board.
               
              I am researching equiptment at this time.
               
              Looks like this cnc may be what I should buy ......????
               
              Ed McHale


              ________________________________
              From: Hamilton Elliott helliott@...>
              To: SherlineCNC@yahoogroups.com
              Sent: Monday, February 11, 2013 1:01 PM
              Subject: RE: [SherlineCNC] New Sherline CNC group


               

              I for one am very happy with having the two lists. This one specialises in the CNC aspect and has a good number of very helpful and knowledgeable people. The other list unfortunately has one member in particular who seems to enjoy causing dissention and because of the lack of an active owner/moderator causes lots of trouble.

              Regards,
              Hamilton

              > -----Original Message-----
              > From: mailto:SherlineCNC%40yahoogroups.com [mailto:mailto:SherlineCNC%40yahoogroups.com] On
              > Behalf Of Sam Marrocco
              > Sent: 11 February 2013 17:43
              > To: mailto:SherlineCNC%40yahoogroups.com
              > Subject: Re: [SherlineCNC] New Sherline CNC group
              >
              >
              > On 2/11/2013 12:27 PM, Dave Hylands wrote:
              > >
              > >
              > >
              > > I don't think that creating a new Sherline-CNC group is the right
              > > thing to do, since the existing group is operating quite well.
              > >
              >
              >
              >
              > As a new user who doesn't know the history of the two (or more) groups, would
              > it be worth considering merging the two groups into SherlineCNC for
              > simplification? This is, of course assuming that the Sherline news list
              > moderator gives a go-ahead.
              >
              > As a member of many newsgroups over the years I've experienced the splintering
              > and cross-posting that separate groups can cause. Although people will always
              > complain about having too many postings to "wade"
              > through I've found that there is nothing like a good subject header to prevent
              > me from reading anything I don't care about.
              >
              >
              >
              >
              > Sam Marrocco
              > Chief Technical Officer
              > 248-548-2500 Main
              > 248-910-3344 Cell
              >
              > "Just because no one understands you doesn't make you an artist."
              >
              > RINGSIDE CREATIVE | INTEGRATED MEDIA STUDIO™ http://www.ringsidecreative.com
              >
              > Find us on Facebook.
              >
              > Please consider the environment before printing this email.
              >
              >
              >
              > [Non-text portions of this message have been removed]
              >
              >
              >
              > ------------------------------------
              >
              > Yahoo! Groups Links
              >
              >
              >



              [Non-text portions of this message have been removed]




              [Non-text portions of this message have been removed]
            • KM6VV
              SherlineCNC is approaching its 10th anniversary! Sorry we can t get a hold of John, I fear he is very ill. My old addresses for him failed. Alan KM6VV
              Message 6 of 28 , Feb 11 11:20 AM
              • 0 Attachment
                SherlineCNC is approaching its 10th anniversary!

                Sorry we can't get a hold of John, I fear he is very ill. My old
                addresses for him failed.

                Alan KM6VV


                On 2/11/2013 10:15 AM, Dave Hylands wrote:
                > Hi Hamilton,
                >
                > On Mon, Feb 11, 2013 at 10:01 AM, Hamilton Elliott <helliott@...>wrote:
                >
                >> I for one am very happy with having the two lists. This one specialises in
                >> the CNC aspect and has a good number of very helpful and knowledgeable
                >> people. The other list unfortunately has one member in particular who seems
                >> to enjoy causing dissention and because of the lack of an active
                >> owner/moderator causes lots of trouble.
                >>
                >
                > I think that there is some confusion happening.
                >
                > There have been the groups Sherline and SherlineCNC for a while.
                >
                > The moderator from the Sherline group has been absent.
                >
                > Recently, Jerry Glickstein created the SherlineAnnex group and Ransome
                > Michasiow created the SherlineMachining group.
                >
                > Tom Wade then went and created Sherline-CNC (notice that it only differs
                > from SherlineCNC by the addition of a dash) claiming that the moderators
                > from SherlineCNC have been absent, which is clearly not the case.
                >
                > I would appeal to Tom that the Sherline-CNC group is not necessary and will
                > only confuse and fragment the users.
                >
                > Links to the various groups:
                > http://groups.yahoo.com/group/Sherline
                > http://groups.yahoo.com/group/SherlineMachining
                > http://groups.yahoo.com/group/SherlineAnnex
                > http://groups.yahoo.com/group/SherlineCNC
                > http://groups.yahoo.com/group/Sherline-CNC
                >
                > Dave Hylands - SherlineCNC Moderator.
                >
                >
              • Martin Dobbins
                Hi Alan, I hope John isn t ill. In case you are not aware Fred Smith (Im Service) posted a message to the Sherline group in early January indicating he was in
                Message 7 of 28 , Feb 11 12:22 PM
                • 0 Attachment
                  Hi Alan,

                  I hope John isn't ill. In case you are not aware Fred Smith (Im Service) posted a message to the Sherline group in early January indicating he was in touch with John and said he expected to be be back again "within a few days".  Fred made it clear that he was not going to share John's contact details with anyone at that time.  I don't  know if you are prepared to go so far as a private message to Fred, but at least that might reassure us that John is not ill even if it does not elicit up to date contact information for you.

                  Martin





                  ________________________________
                  From: KM6VV
                  To: SherlineCNC@yahoogroups.com
                  Sent: Monday, February 11, 2013 1:20 PM
                  Subject: Re: [SherlineCNC] New Sherline CNC group


                   
                  SherlineCNC is approaching its 10th anniversary!

                  Sorry we can't get a hold of John, I fear he is very ill. My old
                  addresses for him failed.

                  Alan KM6VV

                  On 2/11/2013 10:15 AM, Dave Hylands wrote:
                  > Hi Hamilton,
                  >
                  > On Mon, Feb 11, 2013 at 10:01 AM, Hamilton Elliott helliott@...>wrote:
                  >
                  >> I for one am very happy with having the two lists. This one specialises in
                  >> the CNC aspect and has a good number of very helpful and knowledgeable
                  >> people. The other list unfortunately has one member in particular who seems
                  >> to enjoy causing dissention and because of the lack of an active
                  >> owner/moderator causes lots of trouble.
                  >>
                  >
                  > I think that there is some confusion happening.
                  >
                  > There have been the groups Sherline and SherlineCNC for a while.
                  >
                  > The moderator from the Sherline group has been absent.
                  >
                  > Recently, Jerry Glickstein created the SherlineAnnex group and Ransome
                  > Michasiow created the SherlineMachining group.
                  >
                  > Tom Wade then went and created Sherline-CNC (notice that it only differs
                  > from SherlineCNC by the addition of a dash) claiming that the moderators
                  > from SherlineCNC have been absent, which is clearly not the case.
                  >
                  > I would appeal to Tom that the Sherline-CNC group is not necessary and will
                  > only confuse and fragment the users.
                  >
                  > Links to the various groups:
                  > http://groups.yahoo.com/group/Sherline
                  > http://groups.yahoo.com/group/SherlineMachining
                  > http://groups.yahoo.com/group/SherlineAnnex
                  > http://groups.yahoo.com/group/SherlineCNC
                  > http://groups.yahoo.com/group/Sherline-CNC
                  >
                  > Dave Hylands - SherlineCNC Moderator.
                  >
                  >



                  [Non-text portions of this message have been removed]
                • KM6VV
                  Hi Martin, I recall that Fred had said he was in contact with John, I can contact him for a Health and Welfare report. Alan KM6VV
                  Message 8 of 28 , Feb 11 1:44 PM
                  • 0 Attachment
                    Hi Martin,

                    I recall that Fred had said he was in contact with John, I can contact
                    him for a Health and Welfare report.

                    Alan KM6VV

                    On 2/11/2013 12:22 PM, Martin Dobbins wrote:
                    > Hi Alan,
                    >
                    > I hope John isn't ill. In case you are not aware Fred Smith (Im Service) posted a message to the Sherline group in early January indicating he was in touch with John and said he expected to be be back again "within a few days". Fred made it clear that he was not going to share John's contact details with anyone at that time. I don't know if you are prepared to go so far as a private message to Fred, but at least that might reassure us that John is not ill even if it does not elicit up to date contact information for you.
                    >
                    > Martin
                    >
                    >
                  • Edmund McHale
                    Hi   Thanks for the info   Please contact him ?   Ed ( ERM Machining ) ________________________________ From: KM6VV To:
                    Message 9 of 28 , Feb 11 1:48 PM
                    • 0 Attachment
                      Hi
                       
                      Thanks for the info
                       
                      Please contact him ?
                       
                      Ed ( ERM Machining )


                      ________________________________
                      From: KM6VV <KM6VV@...>
                      To: SherlineCNC@yahoogroups.com
                      Sent: Monday, February 11, 2013 4:44 PM
                      Subject: Re: [SherlineCNC] New Sherline CNC group


                       

                      Hi Martin,

                      I recall that Fred had said he was in contact with John, I can contact
                      him for a Health and Welfare report.

                      Alan KM6VV

                      On 2/11/2013 12:22 PM, Martin Dobbins wrote:
                      > Hi Alan,
                      >
                      > I hope John isn't ill. In case you are not aware Fred Smith (Im Service) posted a message to the Sherline group in early January indicating he was in touch with John and said he expected to be be back again "within a few days". Fred made it clear that he was not going to share John's contact details with anyone at that time. I don't know if you are prepared to go so far as a private message to Fred, but at least that might reassure us that John is not ill even if it does not elicit up to date contact information for you.
                      >
                      > Martin
                      >
                      >



                      [Non-text portions of this message have been removed]
                    • Martin Dobbins
                      Hi Alan, Yes, please do, at this point I m beginning to be concerned about John s well- being.  It would also be nice to be able to tell those folks who would
                      Message 10 of 28 , Feb 11 2:35 PM
                      • 0 Attachment
                        Hi Alan,

                        Yes, please do, at this point I'm beginning to be concerned about John's well- being.  It would also be nice to be able to tell those folks who would like to join the Sherline list something substantial about what is happening (or not as the case might be) and Fred might have more information about that.


                        I'm pretty sure Sherline is losing some potential customers over this.

                        Martin



                        ________________________________
                        From: KM6VV
                        To: SherlineCNC@yahoogroups.com
                        Sent: Monday, February 11, 2013 3:44 PM
                        Subject: Re: [SherlineCNC] New Sherline CNC group


                         
                        Hi Martin,

                        I recall that Fred had said he was in contact with John, I can contact
                        him for a Health and Welfare report.

                        Alan KM6VV

                        On 2/11/2013 12:22 PM, Martin Dobbins wrote:
                        > Hi Alan,
                        >
                        > I hope John isn't ill. In case you are not aware Fred Smith (Im Service) posted a message to the Sherline group in early January indicating he was in touch with John and said he expected to be be back again "within a few days". Fred made it clear that he was not going to share John's contact details with anyone at that time. I don't know if you are prepared to go so far as a private message to Fred, but at least that might reassure us that John is not ill even if it does not elicit up to date contact information for you.
                        >
                        > Martin
                        >
                        >



                        [Non-text portions of this message have been removed]
                      • KM6VV
                        OK, I ve got an email off to Fred; and I believe he still monitors this list. Almost 10 years now! Fred was here from the start, and supplies an excellent
                        Message 11 of 28 , Feb 11 2:51 PM
                        • 0 Attachment
                          OK,

                          I've got an email off to Fred; and I believe he still monitors this
                          list. Almost 10 years now! Fred was here from the start, and supplies
                          an excellent CAD/CAM package. I'm still using it, for over 10 years!

                          Alan KM6VV

                          On 2/11/2013 2:35 PM, Martin Dobbins wrote:
                          > Hi Alan,
                          >
                          > Yes, please do, at this point I'm beginning to be concerned about John's well- being. It would also be nice to be able to tell those folks who would like to join the Sherline list something substantial about what is happening (or not as the case might be) and Fred might have more information about that.
                          >
                          >
                          > I'm pretty sure Sherline is losing some potential customers over this.
                          >
                          > Martin
                          >
                        • Martin Dobbins
                          Hi Alan, Which package is that?  I just had a peek at his website and he sells a number of different ones. Martin ________________________________ From: KM6VV
                          Message 12 of 28 , Feb 11 4:18 PM
                          • 0 Attachment
                            Hi Alan,

                            Which package is that?  I just had a peek at his website and he sells a number of different ones.

                            Martin



                            ________________________________
                            From: KM6VV
                            To: SherlineCNC@yahoogroups.com
                            Sent: Monday, February 11, 2013 4:51 PM
                            Subject: Re: [SherlineCNC] New Sherline CNC group


                             
                            OK,

                            I've got an email off to Fred; and I believe he still monitors this
                            list. Almost 10 years now! Fred was here from the start, and supplies
                            an excellent CAD/CAM package. I'm still using it, for over 10 years!

                            Alan KM6VV

                            On 2/11/2013 2:35 PM, Martin Dobbins wrote:
                            > Hi Alan,
                            >
                            > Yes, please do, at this point I'm beginning to be concerned about John's well- being. It would also be nice to be able to tell those folks who would like to join the Sherline list something substantial about what is happening (or not as the case might be) and Fred might have more information about that.
                            >
                            >
                            > I'm pretty sure Sherline is losing some potential customers over this.
                            >
                            > Martin
                            >



                            [Non-text portions of this message have been removed]
                          • KM6VV
                            Hi Martin, I use Vector CAD/CAM. A now-old version, 10.0 as I remember. It will run under Windoz 7, but has to be invoked under admin privileges. I should
                            Message 13 of 28 , Feb 11 4:35 PM
                            • 0 Attachment
                              Hi Martin,

                              I use Vector CAD/CAM. A now-old version, 10.0 as I remember. It will
                              run under Windoz 7, but has to be invoked under admin privileges. I
                              should check out the current version!

                              http://www.cadcamcadcam.com/

                              Alan KM6VV

                              On 2/11/2013 4:18 PM, Martin Dobbins wrote:
                              > Hi Alan,
                              >
                              > Which package is that? I just had a peek at his website and he sells a number of different ones.
                              >
                              > Martin
                              >
                              >
                              >
                            • kungfumachinist
                              ... I just left the other group this morning because of him. PLEASE don t merge the groups... /Daryl
                              Message 14 of 28 , Feb 11 4:37 PM
                              • 0 Attachment
                                --- In SherlineCNC@yahoogroups.com, "Hamilton Elliott" wrote:
                                > The other list unfortunately has one member in particular who seems to enjoy causing dissention

                                I just left the other group this morning because of him. PLEASE don't merge the groups...

                                /Daryl
                              • R.L. Wurdack
                                First principles would indicate that whatever is not hacking it. ... From: KM6VV To: SherlineCNC@yahoogroups.com Sent: Monday, February 11, 2013 1:44 PM
                                Message 15 of 28 , Feb 11 4:40 PM
                                • 0 Attachment
                                  First principles would indicate that "whatever" is not hacking it.

                                  ----- Original Message -----
                                  From: KM6VV
                                  To: SherlineCNC@yahoogroups.com
                                  Sent: Monday, February 11, 2013 1:44 PM
                                  Subject: Re: [SherlineCNC] New Sherline CNC group



                                  Hi Martin,

                                  I recall that Fred had said he was in contact with John, I can contact
                                  him for a Health and Welfare report.

                                  Alan KM6VV

                                  On 2/11/2013 12:22 PM, Martin Dobbins wrote:
                                  > Hi Alan,
                                  >
                                  > I hope John isn't ill. In case you are not aware Fred Smith (Im Service) posted a message to the Sherline group in early January indicating he was in touch with John and said he expected to be be back again "within a few days". Fred made it clear that he was not going to share John's contact details with anyone at that time. I don't know if you are prepared to go so far as a private message to Fred, but at least that might reassure us that John is not ill even if it does not elicit up to date contact information for you.
                                  >
                                  > Martin
                                  >
                                  >




                                  [Non-text portions of this message have been removed]
                                • Mike Bauers
                                  Try -very- hard to ignore him........ You ll be happier. Best to ya... Mike Bauers Milwaukee, Wi, USA
                                  Message 16 of 28 , Feb 11 4:42 PM
                                  • 0 Attachment
                                    Try -very- hard to ignore him........

                                    You'll be happier.

                                    Best to ya...
                                    Mike Bauers
                                    Milwaukee, Wi, USA



                                    On Feb 11, 2013, at 6:37 PM, "kungfumachinist" <kungfumachinist@...> wrote:

                                    >
                                    >
                                    > --- In SherlineCNC@yahoogroups.com, "Hamilton Elliott" wrote:
                                    >> The other list unfortunately has one member in particular who seems to enjoy causing dissention
                                    >
                                    > I just left the other group this morning because of him. PLEASE don't merge the groups...
                                    >
                                    > /Daryl
                                  • Tom Wade
                                    Okay, Dave, maybe i really am confused...... Glad to hear that you are still alive and kicking. Tom
                                    Message 17 of 28 , Feb 11 8:08 PM
                                    • 0 Attachment
                                      Okay, Dave, maybe i really am confused......

                                      Glad to hear that you are still alive and kicking.

                                      Tom


                                      On 2/11/2013 12:27 PM, Dave Hylands wrote:
                                      >
                                      > Hi Tom,
                                      >
                                      > On Mon, Feb 11, 2013 at 4:21 AM, arcmaster3 tom@...
                                      > <mailto:tom%40wade.name>> wrote:
                                      >
                                      > > As the moderator of the SherlineCNC group has been missing for more
                                      > than a
                                      > > year, this group is effectively closed to new members.
                                      > >
                                      >
                                      > I think you mean that the moderator of the Sherline group has been missing
                                      > for more than a year. The moderators of the SherlineCNC group have been
                                      > present and active (I'm one of them, so I know).
                                      >
                                      > > The Sherline-CNC group has been started to try and get more online
                                      > support
                                      > > for Sherline CNC users.
                                      > >
                                      > > Please go to
                                      > >
                                      > > http://groups.yahoo.com/group/Sherline-CNC/?yguid=286785310
                                      > >
                                      > > to sign up for the new group.
                                      > >
                                      >
                                      > I don't think that creating a new Sherline-CNC group is the right thing to
                                      > do, since the existing group is operating quite well.
                                      >
                                      > Dave Hylands - Moderator of SherlineCNC
                                      >
                                      > [Non-text portions of this message have been removed]
                                      >
                                      >
                                    • Tom Wade
                                      Sam, I m not trying to create any political strife here. If I m wrong, and the SherlineCNC group is still going strong, I ll shut down the group. Don t know
                                      Message 18 of 28 , Feb 11 8:13 PM
                                      • 0 Attachment
                                        Sam,

                                        I'm not trying to create any political strife here.

                                        If I'm wrong, and the SherlineCNC group is still going strong, I'll shut
                                        down the group. Don't know how to merge the two of them, if it is even
                                        possible.

                                        Tom Wade


                                        On 2/11/2013 12:42 PM, Sam Marrocco wrote:
                                        >
                                        >
                                        > On 2/11/2013 12:27 PM, Dave Hylands wrote:
                                        > >
                                        > >
                                        > >
                                        > > I don't think that creating a new Sherline-CNC group is the right
                                        > thing to
                                        > > do, since the existing group is operating quite well.
                                        > >
                                        >
                                        > As a new user who doesn't know the history of the two (or more) groups,
                                        > would it be worth considering merging the two groups into SherlineCNC
                                        > for simplification? This is, of course assuming that the Sherline news
                                        > list moderator gives a go-ahead.
                                        >
                                        > As a member of many newsgroups over the years I've experienced the
                                        > splintering and cross-posting that separate groups can cause. Although
                                        > people will always complain about having too many postings to "wade"
                                        > through I've found that there is nothing like a good subject header to
                                        > prevent me from reading anything I don't care about.
                                        >
                                        > Sam Marrocco
                                        > Chief Technical Officer
                                        > 248-548-2500 Main
                                        > 248-910-3344 Cell
                                        >
                                        > "Just because no one understands you doesn't make you an artist."
                                        >
                                        > RINGSIDE CREATIVE | INTEGRATED MEDIA STUDIO™
                                        > http://www.ringsidecreative.com
                                        >
                                        > Find us on Facebook.
                                        >
                                        > Please consider the environment before printing this email.
                                        >
                                        >
                                        > [Non-text portions of this message have been removed]
                                        >
                                        >
                                      • Tom Wade
                                        I may be totally confused herer. I may well have confused the two lists. This happens when you re receiving over 300 emails per day. I am NOT trying to create
                                        Message 19 of 28 , Feb 11 8:16 PM
                                        • 0 Attachment
                                          I may be totally confused herer. I may well have confused the two lists.
                                          This happens when you're receiving over 300 emails per day.

                                          I am NOT trying to create any strife here. If I've created the new group
                                          in error, I will most likely just shut it down.

                                          Tom Wade



                                          On 2/11/2013 12:48 PM, KM6VV wrote:
                                          >
                                          > Tom Wade,
                                          >
                                          > What are you talking about! We have two active moderators on
                                          > SherlineCNC, Dave and I. You'd know that if you'd been reading the
                                          > posts. Or if you'd bothered to email the moderators.
                                          >
                                          > Alan KM6VV
                                          > Owner/Moderator
                                          >
                                          > On 2/11/2013 4:21 AM, arcmaster3 wrote:
                                          > > As the moderator of the SherlineCNC group has been missing for more
                                          > than a year, this group is effectively closed to new members.
                                          > >
                                          > > The Sherline-CNC group has been started to try and get more online
                                          > support for Sherline CNC users.
                                          > >
                                          > > Please go to
                                          > >
                                          > > http://groups.yahoo.com/group/Sherline-CNC/?yguid=286785310
                                          > >
                                          > > to sign up for the new group.
                                          > >
                                          > > Tom Wade
                                          > > Moderator
                                          > >
                                          > >
                                          > >
                                          > >
                                          > > ------------------------------------
                                          > >
                                          > > Yahoo! Groups Links
                                          > >
                                          > >
                                          > >
                                          > >
                                          >
                                          >
                                        • Carl Carlsen
                                          To put it very bluntly, YES you ARE screwed up Tom. There is nothing wrong with this group ....THE CNC GROUP. If it wasn t here or wasn t working, we would
                                          Message 20 of 28 , Feb 11 9:34 PM
                                          • 0 Attachment
                                            To put it very bluntly, YES you ARE screwed up Tom.

                                            There is nothing wrong with this group ....THE CNC GROUP. If it wasn't
                                            here or wasn't working, we would not be able to make these posts AND read
                                            them.

                                            It is the "regular" Sherline group that is giving us problems. And YES
                                            again, there is no need for the new CNC group you have created and you would
                                            do us all a great favor if you would shut it down!

                                            Carl




                                            -----Original Message-----
                                            From: SherlineCNC@yahoogroups.com [mailto:SherlineCNC@yahoogroups.com] On
                                            Behalf Of Tom Wade
                                            Sent: Monday, February 11, 2013 8:16 PM
                                            To: SherlineCNC@yahoogroups.com
                                            Subject: Re: [SherlineCNC] New Sherline CNC group

                                            I may be totally confused herer. I may well have confused the two lists.
                                            This happens when you're receiving over 300 emails per day.

                                            I am NOT trying to create any strife here. If I've created the new group in
                                            error, I will most likely just shut it down.

                                            Tom Wade



                                            On 2/11/2013 12:48 PM, KM6VV wrote:
                                            >
                                            > Tom Wade,
                                            >
                                            > What are you talking about! We have two active moderators on
                                            > SherlineCNC, Dave and I. You'd know that if you'd been reading the
                                            > posts. Or if you'd bothered to email the moderators.
                                            >
                                            > Alan KM6VV
                                            > Owner/Moderator
                                            >
                                            > On 2/11/2013 4:21 AM, arcmaster3 wrote:
                                            > > As the moderator of the SherlineCNC group has been missing for more
                                            > than a year, this group is effectively closed to new members.
                                            > >
                                            > > The Sherline-CNC group has been started to try and get more online
                                            > support for Sherline CNC users.
                                            > >
                                            > > Please go to
                                            > >
                                            > > http://groups.yahoo.com/group/Sherline-CNC/?yguid=286785310
                                            > >
                                            > > to sign up for the new group.
                                            > >
                                            > > Tom Wade
                                            > > Moderator
                                            > >
                                            > >
                                            > >
                                            > >
                                            > > ------------------------------------
                                            > >
                                            > > Yahoo! Groups Links
                                            > >
                                            > >
                                            > >
                                            > >
                                            >
                                            >



                                            ------------------------------------

                                            Yahoo! Groups Links



                                            -----
                                            No virus found in this message.
                                            Checked by AVG - www.avg.com
                                            Version: 2012.0.2238 / Virus Database: 2639/5598 - Release Date: 02/11/13
                                          • S or J
                                            Hi Folks I guess Tom confused which group was in trouble, and he tried to do something about it, which was in error but admirable for motive. Obvious now, as
                                            Message 21 of 28 , Feb 13 7:45 AM
                                            • 0 Attachment
                                              Hi Folks

                                              I guess Tom confused which group was in trouble, and he tried to do something about it, which was in error but admirable for motive.

                                              Obvious now, as Dave Hylands has confirmed, SherlineCNC is alive and well and finely moderated.

                                              Like many of you here, I followed the other group for many years until it went out of control. I don't read it any more.

                                              So despite having a manual Sherline mill, I found that manual mill or lathe users were very well served by the SherlineCNC group.

                                              After all, a CNC setup is largely an add on to a manual machine, and the manual portions of a CNC machine's needs still require solutions, tips, and help.

                                              My concern would be for the new owner of a manual Sherline machine, who on looking for a Yahoo support group, will erroneously think that the SherlineCNC group is not the one he wants.

                                              Meanwhile, if Sherline owners want to read many prior discussions without the hassle and excess baggage found in an archive search, they can simply read or download the appropriate files from my website.

                                              Life is never perfect, but we all try as best we can.

                                              Regards
                                              Steve -- in Thunder Bay, Ontario, Canada
                                              Machining and Metalworking at Home
                                              http://www.janellestudio.com/metal/



                                              [Non-text portions of this message have been removed]
                                            • KM6VV
                                              Yes Steve, I can confirm that the SherlineCNC list is alive and well! Almost 10 years now. Non-CNC users are still welcome! And we would delight in
                                              Message 22 of 28 , Feb 13 10:23 AM
                                              • 0 Attachment
                                                Yes Steve,

                                                I can confirm that the SherlineCNC list is alive and well! Almost 10
                                                years now.

                                                Non-CNC users are still welcome! And we would delight in discussing
                                                machining on either CNC'd or manual mills and lathes. What we won't
                                                permit is the noise that is on the other list. I hope John gets back!
                                                (I haven't heard back from Fred).

                                                Alan KM6VV
                                                List Owner

                                                On 2/13/2013 7:45 AM, S or J wrote:
                                                > Hi Folks
                                                >
                                                > I guess Tom confused which group was in trouble, and he tried to do something about it, which was in error but admirable for motive.
                                                >
                                                > Obvious now, as Dave Hylands has confirmed, SherlineCNC is alive and well and finely moderated.
                                                >
                                                > Like many of you here, I followed the other group for many years until it went out of control. I don't read it any more.
                                                >
                                                > So despite having a manual Sherline mill, I found that manual mill or lathe users were very well served by the SherlineCNC group.
                                                >
                                                > After all, a CNC setup is largely an add on to a manual machine, and the manual portions of a CNC machine's needs still require solutions, tips, and help.
                                                >
                                                > My concern would be for the new owner of a manual Sherline machine, who on looking for a Yahoo support group, will erroneously think that the SherlineCNC group is not the one he wants.
                                                >
                                                > Meanwhile, if Sherline owners want to read many prior discussions without the hassle and excess baggage found in an archive search, they can simply read or download the appropriate files from my website.
                                                >
                                                > Life is never perfect, but we all try as best we can.
                                                >
                                                > Regards
                                                > Steve -- in Thunder Bay, Ontario, Canada
                                                > Machining and Metalworking at Home
                                                > http://www.janellestudio.com/metal/
                                                >
                                              Your message has been successfully submitted and would be delivered to recipients shortly.