Loading ...
Sorry, an error occurred while loading the content.

Re:Axis 0 error -Now CNC workshop

Expand Messages
  • birel33
    Ok what am I doing wrong. I downloaded the software and burned it to a CD. I then set the computer to boot from the disc and it is will not boot from the CD.
    Message 1 of 3 , Oct 26, 2012
    • 0 Attachment
      Ok what am I doing wrong. I downloaded the software and burned it to a CD. I then set the computer to boot from the disc and it is will not boot from the CD. Any help would be great.


      --- In SherlineCNC@yahoogroups.com, Tom Wade <tom@...> wrote:
      >
      > I will miss it also.
      >
      > Ron, I saw your nametag there, but never got a chance to talk to you.
      >
      > George did a good job, sorry to hear he can't continue.
      >
      > Tom Wade
      >
      >
      >
      > On 10/26/2012 8:22 AM, Ron Ginger wrote:
      > >
      > > On 10/26/2012 5:37 AM, Tom Wade wrote:
      > > > Don't know where you live, but every June, "Digital Machinist" magazine
      > > > hosts a cnc workshop in Ann Arbor, Michigan. I try to never miss it. If
      > > > you go and read the EMC2 history on the website, and take note of the
      > > > names of the pioneers who helped move EMC into the civilian world, when
      > > > you go to the workshop, almost all of the names in that history are
      > > > always there.
      > >
      > > But sadly, no more. George Bulliss has decided he will not be able to
      > > run the workshop again. It was requiring to much time away from his real
      > > job as an editor of magazines.
      > >
      > > I am considering doing the CNC build class as I did the past 2 years in
      > > AA at the Cabin Fever Expo in York PA in April. No firm decision yet,
      > > but I have been discussing it with the vendors involved.
      > >
      > > We will have a CNC area at Cabin Fever with several vendors, and a
      > > seminar program will be developed, but clearly not as extensive as the
      > > workshop.
      > >
      > > The LinuxCNC guys are talking on the mailing list about an event in June
      > > at a shop in Kansas. You will have to look at the mail list for details.
      > >
      > > Its to bad the CNC workshop will not be run again, it has always been a
      > > great event, starting back in Galesburg IL nearly 10 years ago. I will
      > > miss it.
      > >
      > > ron ginger
      > >
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.