Loading ...
Sorry, an error occurred while loading the content.
 

Re: Converting .STL/.STP files to G-code for Sherline

Expand Messages
  • kerickson
    At $1000 for the CAM package I have to pass. If I was doing this as a paying job I would consider it.
    Message 1 of 7 , Sep 17, 2012
      At $1000 for the CAM package I have to pass. If I was doing this as a paying job I would consider it.

      --- In SherlineCNC@yahoogroups.com, "Ken Condal" <kencondal@...> wrote:
      >
      > I use Alibre with their integrated CAM package. It's a bit pricey, but an
      > integrated solution is really nice.
      >
      >
      >
      > Ken
      >
      >
      >
      >
      >
      > _____
      >
      > From: SherlineCNC@yahoogroups.com [mailto:SherlineCNC@yahoogroups.com] On
      > Behalf Of kerickson
      > Sent: Monday, September 17, 2012 12:31 PM
      > To: SherlineCNC@yahoogroups.com
      > Subject: [SherlineCNC] Converting .STL/.STP files to G-code for Sherline
      >
      >
      >
      >
      >
      > I've generated a small design using Alibre PE Design 2012. I need to
      > generate some G-code. The Alibre s/w can output .STL or .STP files but no
      > G-code so I need some type of converter. I've Googled the converters and
      > found a number of programs but I don't which would do the job for the
      > Sherline mill.
      >
      > Any advice?
      >
      > TIA.
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.