Loading ...
Sorry, an error occurred while loading the content.

Re: [SherlineCNC] Re: Sherline CNC Lathe

Expand Messages
  • ransome michasiow
    Have 4 - 3jaw chucks no problems. Ransome ... From: wongsterwish Subject: [SherlineCNC] Re: Sherline CNC Lathe To:
    Message 1 of 14 , Jun 30, 2012
    • 0 Attachment
      Have 4 - 3jaw chucks no problems.
      Ransome

      --- On Sat, 6/30/12, wongsterwish <wongsterwish@...> wrote:


      From: wongsterwish <wongsterwish@...>
      Subject: [SherlineCNC] Re: Sherline CNC Lathe
      To: SherlineCNC@yahoogroups.com
      Date: Saturday, June 30, 2012, 6:45 AM



       



      Not replying to Ken but picking the latest reply in the list.

      I have the same problem with the 3 jaw chuck. To make it work, I've to take very light cut (around 0.25mm per pass) at fast spindle speed (max most of the time).

      Regards,
      Wong

      --- In SherlineCNC@yahoogroups.com, "Ken Condal" <kencondal@...> wrote:
      >
      > Your 3-jaw chuck is definitely defective. Contact Sherline - they're good to
      > work with.
      >
      >
      >
      > A 3-jaw chuck should hold your work without issue, but there is some minor
      > (< .003") runout that can't be helped. For projects that need better
      > tolerance, you'll need an independent 4-jaw chuck and an indicator to mount
      > the work perfectly on center.
      >
      >
      >
      > I have both and use one or the other based on the tolerances I need for the
      > piece I'm turning.
      >
      >
      >
      > Ken
      >
      >
      >
      >
      >
      > _____
      >
      > From: SherlineCNC@yahoogroups.com [mailto:SherlineCNC@yahoogroups.com] On
      > Behalf Of Robert Hicks
      > Sent: Friday, June 29, 2012 5:23 PM
      > To: SherlineCNC@yahoogroups.com
      > Subject: Re: [SherlineCNC] Sherline CNC Lathe
      >
      >
      >
      >
      >
      > 3/4" Dia an 3.675 inches in length.
      >
      > _,_._,___
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >








      [Non-text portions of this message have been removed]
    Your message has been successfully submitted and would be delivered to recipients shortly.