Loading ...
Sorry, an error occurred while loading the content.
 

Re: Success with Cetol

Expand Messages
  • josrulz_2001
    Thanks Carter. I can t seem to find red 3M hand pads online. This is probably entirely a failure on my part of course. But anyway, does the red pad clean the
    Message 1 of 8 , May 6, 2013
      Thanks Carter. I can't seem to find red 3M hand pads online. This is probably entirely a failure on my part of course.

      But anyway, does the red pad clean the "gray"?



      --- In Sabresailboat@yahoogroups.com, Carter Brey <carter.brey@...> wrote:
      >
      > The ones I use are just square pads for hand use.
      > CB
      > On May 6, 2013 3:59 PM, "josrulz_2001" <josrulz_2001@...> wrote:
      >
      > > **
      > >
      > >
      > > The round red buffer pads? Or is there another type?
      > >
      > > --- In Sabresailboat@yahoogroups.com, Carter Brey <carter.brey@> wrote:
      > > >
      > > > 3M red pad, feathering out into surrounding finish.
      > > > On May 6, 2013 3:27 PM, "josrulz_2001" <josrulz_2001@> wrote:
      > > >
      > > > > **
      > > > >
      > > > >
      > > > > For those who did touch-ups, I have a quick question. We have a few
      > > spots
      > > > > that got dinged or worn and have turned gray. Did you do any cleaning
      > > to
      > > > > those spots to get them back to natural wood color before covering
      > > again
      > > > > with Cetol? Any other tips for touch-ups?
      > > > > Thanks,
      > > > > Jim
      > > > > 1984 Sabre 34, #207
      > > > >
      > > > > --- In Sabresailboat@yahoogroups.com, Charles Mueller <transerie2005@>
      > > > > wrote:
      > > > > >
      > > > > > I just refinished mine with the same product. I lightly sanded the
      > > teak
      > > > > first with a 3M sanding sponge, brushed them off, and put the masking
      > > tape
      > > > > all around. I wiped them down with a tack rag and then used a foam
      > > brush to
      > > > > apply the Cetol. I too appreciated this product for its appearance and
      > > ease
      > > > > of application. This is my second year with finished wood rather than
      > > bear
      > > > > teak.
      > > > > > Chas S28 #402
      > > > > >
      > > > > >
      > > > > > Sent from my iPad
      > > > > >
      > > > > > On May 5, 2013, at 6:46 AM, "fs3873" <jsts@> wrote:
      > > > > >
      > > > > > > Last year we stripped out toe rails, and refinished them with
      > > Natural
      > > > > Teak Cetol, and I am very happy to report that they are still in
      > > excellent
      > > > > condition and look almost like they were just done.
      > > > > > >
      > > > > > > The only places that I have a problem is in the couple of places
      > > > > (maybe 10) that we dinged the wood. So at this time I want to touch up
      > > > > those areas, and put on a complete top coat which was recommended that
      > > I do
      > > > > every year.
      > > > > > >
      > > > > > > Does anyone have any advise for this project?
      > > > > > >
      > > > > > >
      > > > > > >
      > > > > > > ------------------------------------
      > > > > > >
      > > > > > > Yahoo! Groups Links
      > > > > > >
      > > > > > >
      > > > > > >
      > > > > >
      > > > >
      > > > >
      > > > >
      > > >
      > >
      > >
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.