Loading ...
Sorry, an error occurred while loading the content.

Re: Marine Plastic lumber i.e Starboard

Expand Messages
  • JohnF
    I recall there are sellers on ebay. Can t speak to pricing; it is expensive everywhere I think.
    Message 1 of 13 , Feb 20, 2013
    • 0 Attachment
      I recall there are sellers on ebay. Can't speak to pricing; it is expensive everywhere I think.



      --- In Sabresailboat@yahoogroups.com, "g_ingram" <george-ingram@...> wrote:
      >
      > I am looking for a local supplier of marine plastic lumber (Starboard, Kings Starboard). West Marine sells a product but it is very expensive. I am looking in the Woburn, Boston, Salem, Mass. area. I am looking for sizes 1/2 " 30x50 1/2" by 12x30. Colors white, black, seafoam. I thought someone at West Marine said there was a place in Somerville MA.
      > I will be building new panels to mount electronics. I have used this material before and it is very easy to cut and machine and it looks good. The West Marine prices are to high.
      >
      > Thanks
      > George
      >
    • Dave Evans
      Probably thinking of Boulter Plywood (.com) on Broadway in Somerville. Looks like they do have Starboard. Amazing selection of teak, ash, everything. All in
      Message 2 of 13 , Feb 20, 2013
      • 0 Attachment
        Probably thinking of Boulter Plywood (.com) on Broadway in Somerville. Looks like they do have Starboard. Amazing selection of teak, ash, everything. All in two or three linked storefronts near Sullivan Square.
        dge

        On 2/20/2013 9:55 AM, g_ingram wrote:
         

        I am looking for a local supplier of marine plastic lumber (Starboard, Kings Starboard). West Marine sells a product but it is very expensive. I am looking in the Woburn, Boston, Salem, Mass. area. I am looking for sizes 1/2 " 30x50 1/2" by 12x30. Colors white, black, seafoam. I thought someone at West Marine said there was a place in Somerville MA.
        I will be building new panels to mount electronics. I have used this material before and it is very easy to cut and machine and it looks good. The West Marine prices are to high.

        Thanks
        George


      • Allison Lehman
        You might try a trophy shop. I know my local one carries it. Allison
        Message 3 of 13 , Feb 20, 2013
        • 0 Attachment
          You might try a trophy shop.  I know my local one carries it.

          Allison




          On Feb 20, 2013, at 7:33 AM, JohnF wrote:

           

          I recall there are sellers on ebay. Can't speak to pricing; it is expensive everywhere I think.

          --- In Sabresailboat@yahoogroups.com, "g_ingram" wrote:
          >
          > I am looking for a local supplier of marine plastic lumber (Starboard, Kings Starboard). West Marine sells a product but it is very expensive. I am looking in the Woburn, Boston, Salem, Mass. area. I am looking for sizes 1/2 " 30x50 1/2" by 12x30. Colors white, black, seafoam. I thought someone at West Marine said there was a place in Somerville MA.
          > I will be building new panels to mount electronics. I have used this material before and it is very easy to cut and machine and it looks good. The West Marine prices are to high.
          >
          > Thanks
          > George
          >


        • sailor11767
          Ebay is a good source, but you can do better there if you aren t so specific. Search on plastic sheet for other types of plastics. ABS is a good product
          Message 4 of 13 , Feb 20, 2013
          • 0 Attachment
            Ebay is a good source, but you can do better there if you aren't so specific. Search on "plastic sheet" for other types of plastics. ABS is a good product that is quite a bit cheaper. Also, Azec (or something like that) at Home Depot is sold as trim material for houses. It's not quite solid, so cut edges don't look good, but if the edges are hidden it looks like a really nice product.

            Harry

            --- In Sabresailboat@yahoogroups.com, "g_ingram" <george-ingram@...> wrote:
            >
            > I am looking for a local supplier of marine plastic lumber (Starboard, Kings Starboard). West Marine sells a product but it is very expensive. I am looking in the Woburn, Boston, Salem, Mass. area. I am looking for sizes 1/2 " 30x50 1/2" by 12x30. Colors white, black, seafoam. I thought someone at West Marine said there was a place in Somerville MA.
            > I will be building new panels to mount electronics. I have used this material before and it is very easy to cut and machine and it looks good. The West Marine prices are to high.
            >
            > Thanks
            > George
            >
          • mookiesurfs
            Marine surplus stores have lots of it from scraps and leftovers. It s the way to go, IF they have what you want. Bill B Sent from an elegant interface with
            Message 5 of 13 , Feb 20, 2013
            • 0 Attachment
              Marine surplus stores have lots of it from scraps and leftovers. It's the way to go, IF they have what you want.
              Bill B

              Sent from an elegant interface with limited functionality, while traveling 

              On Feb 20, 2013, at 5:59 AM, Allison Lehman <allison@...> wrote:

               

              You might try a trophy shop.  I know my local one carries it.


              Allison




              On Feb 20, 2013, at 7:33 AM, JohnF wrote:

               

              I recall there are sellers on ebay. Can't speak to pricing; it is expensive everywhere I think.

              --- In Sabresailboat@yahoogroups.com, "g_ingram" wrote:
              >
              > I am looking for a local supplier of marine plastic lumber (Starboard, Kings Starboard). West Marine sells a product but it is very expensive. I am looking in the Woburn, Boston, Salem, Mass. area. I am looking for sizes 1/2 " 30x50 1/2" by 12x30. Colors white, black, seafoam. I thought someone at West Marine said there was a place in Somerville MA.
              > I will be building new panels to mount electronics. I have used this material before and it is very easy to cut and machine and it looks good. The West Marine prices are to high.
              >
              > Thanks
              > George
              >


            • pbfein
              BTW - This is a great idea. I need to redo my panels and this is much simpler then trying to recreate the laminate over plywood construction for the same
              Message 6 of 13 , Feb 21, 2013
              • 0 Attachment
                BTW - This is a great idea. I need to redo my panels and this is much simpler then trying to recreate the laminate over plywood construction for the same exact look.

                Peter

                --- In Sabresailboat@yahoogroups.com, "g_ingram" <george-ingram@...> wrote:
                >
                > I am looking for a local supplier of marine plastic lumber (Starboard, Kings Starboard). West Marine sells a product but it is very expensive. I am looking in the Woburn, Boston, Salem, Mass. area. I am looking for sizes 1/2 " 30x50 1/2" by 12x30. Colors white, black, seafoam. I thought someone at West Marine said there was a place in Somerville MA.
                > I will be building new panels to mount electronics. I have used this material before and it is very easy to cut and machine and it looks good. The West Marine prices are to high.
                >
                > Thanks
                > George
                >
              • Dave Evans
                I ve always used black Plexiglas for this. It s sturdy, unobtrusive and cuts easily if messily. Wait til you cut Azek! dge
                Message 7 of 13 , Feb 21, 2013
                • 0 Attachment
                  I've always used black Plexiglas for this. It's sturdy, unobtrusive and cuts easily if messily. Wait 'til you cut Azek!
                  dge

                  On 2/21/2013 10:16 AM, pbfein wrote:
                   

                  BTW - This is a great idea. I need to redo my panels and this is much simpler then trying to recreate the laminate over plywood construction for the same exact look.

                  Peter


                • shorthandedsailor
                  For smaller situations you can substitute plastic cutting boards for starboard. It is really cheap but basically the same material. I have used it in a number
                  Message 8 of 13 , Feb 21, 2013
                  • 0 Attachment
                    For smaller situations you can substitute plastic cutting boards for starboard. It is really cheap but basically the same material. I have used it in a number of places for repairs and for shelving in the refigerator. Its worth a try. S 402 #37 Mike

                    --- In Sabresailboat@yahoogroups.com, "g_ingram" <george-ingram@...> wrote:
                    >
                    > I am looking for a local supplier of marine plastic lumber (Starboard, Kings Starboard). West Marine sells a product but it is very expensive. I am looking in the Woburn, Boston, Salem, Mass. area. I am looking for sizes 1/2 " 30x50 1/2" by 12x30. Colors white, black, seafoam. I thought someone at West Marine said there was a place in Somerville MA.
                    > I will be building new panels to mount electronics. I have used this material before and it is very easy to cut and machine and it looks good. The West Marine prices are to high.
                    >
                    > Thanks
                    > George
                    >
                  • pbfein
                    I just spoke to Boulter. They can get it for a much better price then West. Give them a call and ask for Chris. I just ordered a piece of matte black 1/2
                    Message 9 of 13 , Feb 21, 2013
                    • 0 Attachment
                      I just spoke to Boulter. They can get it for a much better price then West. Give them a call and ask for Chris. I just ordered a piece of matte black 1/2" to make two panels.

                      Peter

                      --- In Sabresailboat@yahoogroups.com, Dave Evans <dave@...> wrote:
                      >
                      > Probably thinking of Boulter Plywood (.com) on Broadway in Somerville.
                      > Looks like they do have Starboard. Amazing selection of teak, ash,
                      > everything. All in two or three linked storefronts near Sullivan Square.
                      > dge
                      >
                      > On 2/20/2013 9:55 AM, g_ingram wrote:
                      > >
                      > > I am looking for a local supplier of marine plastic lumber (Starboard,
                      > > Kings Starboard). West Marine sells a product but it is very
                      > > expensive. I am looking in the Woburn, Boston, Salem, Mass. area. I am
                      > > looking for sizes 1/2 " 30x50 1/2" by 12x30. Colors white, black,
                      > > seafoam. I thought someone at West Marine said there was a place in
                      > > Somerville MA.
                      > > I will be building new panels to mount electronics. I have used this
                      > > material before and it is very easy to cut and machine and it looks
                      > > good. The West Marine prices are to high.
                      > >
                      > > Thanks
                      > > George
                      > >
                      >
                    • john kalinowski
                      One of my local lumber yards here in NH has a wide selection of plastic lumber. Much better that Lowes.  Check you local independent lumberyard to see what
                      Message 10 of 13 , Feb 21, 2013
                      • 0 Attachment
                        One of my local lumber yards here in NH has a wide selection of plastic lumber. Much better that Lowes.  Check you local independent lumberyard to see what they have access to.  

                        A trip to Boulter plywood  in Sommerville to look at their selection is always a great diversion. Ranks right in there with Exotic Lumber in Annapolis and I am not even a wood worker..

                        --- On Thu, 2/21/13, pbfein <pbfein@...> wrote:

                        From: pbfein <pbfein@...>
                        Subject: [SabreSailboat] Re: Marine Plastic lumber i.e Starboard
                        To: Sabresailboat@yahoogroups.com
                        Date: Thursday, February 21, 2013, 10:16 AM

                         

                        BTW - This is a great idea. I need to redo my panels and this is much simpler then trying to recreate the laminate over plywood construction for the same exact look.

                        Peter

                        --- In Sabresailboat@yahoogroups.com, "g_ingram" wrote:
                        >
                        > I am looking for a local supplier of marine plastic lumber (Starboard, Kings Starboard). West Marine sells a product but it is very expensive. I am looking in the Woburn, Boston, Salem, Mass. area. I am looking for sizes 1/2 " 30x50 1/2" by 12x30. Colors white, black, seafoam. I thought someone at West Marine said there was a place in Somerville MA.
                        > I will be building new panels to mount electronics. I have used this material before and it is very easy to cut and machine and it looks good. The West Marine prices are to high.
                        >
                        > Thanks
                        > George
                        >

                      • sabre30_36
                        I have found Garolite (G10) to be a great material for this sort of project. Really strong, easy to work with and you won t need it to be so thick. It bonds
                        Message 11 of 13 , Feb 21, 2013
                        • 0 Attachment
                          I have found Garolite (G10) to be a great material for this sort of project. Really strong, easy to work with and you won't need it to be so thick. It bonds really well to FRP (fiberglass).

                          Only downside is it needs painting (out of the box it is a kind of ugly green).

                          I did a project with a bunch of Starboard a long time ago - I found a guy in Florida who had great prices even with shipping factored in. If only I could remember his name . . . :-)

                          Eric
                          Sabre 30 #36 "Spirit"
                          West River, MD

                          --- In Sabresailboat@yahoogroups.com, john kalinowski <sabre32sailor@...> wrote:
                          >
                          > One of my local lumber yards here in NH has a wide selection of plastic lumber. Much better that Lowes.  Check you local independent lumberyard to see what they have access to.  
                          > A trip to Boulter plywood  in Sommerville to look at their selection is always a great diversion. Ranks right in there with Exotic Lumber in Annapolis and I am not even a wood worker..
                          >
                          > --- On Thu, 2/21/13, pbfein <pbfein@...> wrote:
                          >
                          > From: pbfein <pbfein@...>
                          > Subject: [SabreSailboat] Re: Marine Plastic lumber i.e Starboard
                          > To: Sabresailboat@yahoogroups.com
                          > Date: Thursday, February 21, 2013, 10:16 AM
                          >
                          >
                          >
                          >
                          >
                          >
                          >
                          >
                          >
                          >
                          >
                          >
                          >
                          >
                          >
                          >
                          >  
                          >
                          >
                          >
                          >
                          >
                          >
                          >
                          >
                          >
                          > BTW - This is a great idea. I need to redo my panels and this is much simpler then trying to recreate the laminate over plywood construction for the same exact look.
                          >
                          >
                          >
                          > Peter
                          >
                          >
                          >
                          > --- In Sabresailboat@yahoogroups.com, "g_ingram" wrote:
                          >
                          > >
                          >
                          > > I am looking for a local supplier of marine plastic lumber (Starboard, Kings Starboard). West Marine sells a product but it is very expensive. I am looking in the Woburn, Boston, Salem, Mass. area. I am looking for sizes 1/2 " 30x50 1/2" by 12x30. Colors white, black, seafoam. I thought someone at West Marine said there was a place in Somerville MA.
                          >
                          > > I will be building new panels to mount electronics. I have used this material before and it is very easy to cut and machine and it looks good. The West Marine prices are to high.
                          >
                          > >
                          >
                          > > Thanks
                          >
                          > > George
                          >
                          > >
                          >
                        • Neil Russell
                          For anyone north of Boston, Highland Hardwoods in Brentwood NH has a very nice selection of woods, including teak and mahogany, but also some very nice cherry.
                          Message 12 of 13 , Feb 23, 2013
                          • 0 Attachment
                            For anyone north of Boston, Highland Hardwoods in Brentwood NH has a very nice selection of woods,
                            including teak and mahogany, but also some very nice cherry. They sell rough cut, and also smooth finished.

                            $45 for  a 12" x 6' x 3/4" curly cherry board a couple weeks ago...

                            "Whisper"
                            S362-266
                            Salem MA

                            On Feb 21, 2013, at 10:16 AM, pbfein <pbfein@...> wrote:

                             

                            BTW - This is a great idea. I need to redo my panels and this is much simpler then trying to recreate the laminate over plywood construction for the same exact look.

                            Peter

                            --- In Sabresailboat@yahoogroups.com, "g_ingram" wrote:
                            >
                            > I am looking for a local supplier of marine plastic lumber (Starboard, Kings Starboard). West Marine sells a product but it is very expensive. I am looking in the Woburn, Boston, Salem, Mass. area. I am looking for sizes 1/2 " 30x50 1/2" by 12x30. Colors white, black, seafoam. I thought someone at West Marine said there was a place in Somerville MA.
                            > I will be building new panels to mount electronics. I have used this material before and it is very easy to cut and machine and it looks good. The West Marine prices are to high.
                            >
                            > Thanks
                            > George
                            >





                          Your message has been successfully submitted and would be delivered to recipients shortly.