Loading ...
Sorry, an error occurred while loading the content.
 

Mouse pe HC-2000

Expand Messages
  • payty
    Salutare tuturor, Stiti cumva daca functioneaza interfata asta pe un hc-2000?
    Message 1 of 8 , Nov 28, 2013
      Salutare tuturor,

      Stiti cumva daca functioneaza interfata asta pe un hc-2000?
      http://www.ebay.com/itm/Brand-new-K-Mouse-Turbo-mouse-and-joystick-interface-for-the-ZX-Spectrum-/400599590966?pt=UK_VintageComputing_RL&hash=item5d4598a836
    • yo3ghm
      Salutare.. ar trebuie sa mearga..cel putin teoretic ..are un CPLD tip Xilinx Xc9572 sau Xc9536 cu o schema asemanatoare ca aici :
      Message 2 of 8 , Nov 29, 2013

        Salutare..

        ar trebuie sa mearga..cel putin "teoretic"..are un CPLD tip Xilinx Xc9572 sau Xc9536 cu o schema asemanatoare ca aici : http://www.jrok.com/project/speckey/spec_key.html,

        care "emuleaza" un port..mai exact portul 31 (zecimal) pentru Kempston.

        Nu am schema de la HC2K....acum in fata, nu mai tin minte daca HC-ul are deja "ocupat" portul 31 realizat pe placa de baza cu alte circuite.

        Exista riscul sa apare un "conflict" de date pe magistrala.

         

         



        ---In RomanianHomeComputer@yahoogroups.com, <payty@...> wrote:

        Salutare tuturor,

        Stiti cumva daca functioneaza interfata asta pe un hc-2000?
        http://www.ebay.com/itm/Brand-new-K-Mouse-Turbo-mouse-and-joystick-interface-for-the-ZX-Spectrum-/400599590966?pt=UK_VintageComputing_RL&hash=item5d4598a836
      • payty
        Merci de info. Intre timp am cumparat interfata. O sa postez aici rezulatul dupa ce ajunge. Tipul care le comercializeaza mi-a raspuns urmatoarele, printre
        Message 3 of 8 , Nov 29, 2013
          Merci de info. Intre timp am cumparat interfata. O sa postez aici rezulatul dupa ce ajunge.

          Tipul care le comercializeaza mi-a raspuns urmatoarele, printre altele:

          "The K-Mouse Turbo interface uses ports 64223, 64479, 65503, 65247, and the joystick port 31"


          ---In RomanianHomeComputer@yahoogroups.com, <yo3ghm@...> wrote:

          Salutare..

          ar trebuie sa mearga..cel putin "teoretic"..are un CPLD tip Xilinx Xc9572 sau Xc9536 cu o schema asemanatoare ca aici : http://www.jrok.com/project/speckey/spec_key.html,

          care "emuleaza" un port..mai exact portul 31 (zecimal) pentru Kempston.

          Nu am schema de la HC2K....acum in fata, nu mai tin minte daca HC-ul are deja "ocupat" portul 31 realizat pe placa de baza cu alte circuite.

          Exista riscul sa apare un "conflict" de date pe magistrala.

           

           



          ---In RomanianHomeComputer@yahoogroups.com, <payty@...> wrote:

          Salutare tuturor,

          Stiti cumva daca functioneaza interfata asta pe un hc-2000?
          http://www.ebay.com/itm/Brand-new-K-Mouse-Turbo-mouse-and-joystick-interface-for-the-ZX-Spectrum-/400599590966?pt=UK_VintageComputing_RL&hash=item5d4598a836
        • VELESOFT
          K-MOUSE TURBO is my old project. Use three mouse ports #FADF,#FBDF and #FFDF. Joystick port is switchable on K-MOUSE 2011, but is impossible disable joystick.
          Message 4 of 8 , Nov 29, 2013
            
            K-MOUSE TURBO is my old project. Use three mouse ports #FADF,#FBDF and #FFDF. Joystick port is switchable on K-MOUSE 2011, but is impossible disable joystick. For CPLD chip exist also previous firmware version "2008" with possibility disable or enable kempston joystick port (k-mouse 2008 can work as MOUSE+KEMPSTON or MOUSE ONLY or KEMPSTON ONLY.
             
            K-MOUSE interface contain 8 resistors on all data lines = data protector (eliminate data collisions).
             
            VELESOFT
            ----- Original Message -----
            From: payty@...
            Sent: Friday, November 29, 2013 10:12 PM
            Subject: [RomanianHomeComputer] RE: RE: Mouse pe HC-2000

            Merci de info. Intre timp am cumparat interfata. O sa postez aici rezulatul dupa ce ajunge.

            Tipul care le comercializeaza mi-a raspuns urmatoarele, printre altele:

            "The K-Mouse Turbo interface uses ports 64223, 64479, 65503, 65247, and the joystick port 31"


            ---In RomanianHomeComputer@yahoogroups.com, <yo3ghm@...> wrote:

            Salutare..

            ar trebuie sa mearga..cel putin "teoretic"..are un CPLD tip Xilinx Xc9572 sau Xc9536 cu o schema asemanatoare ca aici : http://www.jrok.com/project/speckey/spec_key.html,

            care "emuleaza" un port..mai exact portul 31 (zecimal) pentru Kempston.

            Nu am schema de la HC2K....acum in fata, nu mai tin minte daca HC-ul are deja "ocupat" portul 31 realizat pe placa de baza cu alte circuite.

            Exista riscul sa apare un "conflict" de date pe magistrala.

             

             




            Tato zpráva neobsahuje viry ani jiný škodlivý kód -avast! Antivirus je aktivní.


          • Ivanescu Bogdan
            Should I ask the guy that is making these to use the old firmware? ________________________________ From: VELESOFT To:
            Message 5 of 8 , Nov 30, 2013
              Should I ask the guy that is making these to use the old firmware?




              From: VELESOFT <velesoft@...>
              To: RomanianHomeComputer@yahoogroups.com
              Sent: Saturday, November 30, 2013 12:46 AM
              Subject: Re: [RomanianHomeComputer] RE: RE: Mouse pe HC-2000

               
              
              K-MOUSE TURBO is my old project. Use three mouse ports #FADF,#FBDF and #FFDF. Joystick port is switchable on K-MOUSE 2011, but is impossible disable joystick. For CPLD chip exist also previous firmware version "2008" with possibility disable or enable kempston joystick port (k-mouse 2008 can work as MOUSE+KEMPSTON or MOUSE ONLY or KEMPSTON ONLY.
               
              K-MOUSE interface contain 8 resistors on all data lines = data protector (eliminate data collisions).
               
              VELESOFT
              ----- Original Message -----
              From: payty@...
              Sent: Friday, November 29, 2013 10:12 PM
              Subject: [RomanianHomeComputer] RE: RE: Mouse pe HC-2000

              Merci de info. Intre timp am cumparat interfata. O sa postez aici rezulatul dupa ce ajunge.

              Tipul care le comercializeaza mi-a raspuns urmatoarele, printre altele:

              "The K-Mouse Turbo interface uses ports 64223, 64479, 65503, 65247, and the joystick port 31"


              ---In RomanianHomeComputer@yahoogroups.com, <yo3ghm@...> wrote:

              Salutare..
              ar trebuie sa mearga..cel putin "teoretic"..are un CPLD tip Xilinx Xc9572 sau Xc9536 cu o schema asemanatoare ca aici : http://www.jrok.com/project/speckey/spec_key.html,
              care "emuleaza" un port..mai exact portul 31 (zecimal) pentru Kempston.
              Nu am schema de la HC2K....acum in fata, nu mai tin minte daca HC-ul are deja "ocupat" portul 31 realizat pe placa de baza cu alte circuite.
              Exista riscul sa apare un "conflict" de date pe magistrala.
               
               


              ---In RomanianHomeComputer@yahoogroups.com, <payty@...> wrote:

              Salutare tuturor,

              Stiti cumva daca functioneaza interfata asta pe un hc-2000?
              http://www.ebay.com/itm/Brand-new-K-Mouse-Turbo-mouse-and-joystick-interface-for-the-ZX-Spectrum-/400599590966?pt=UK_VintageComputing_RL&hash=item5d4598a836



              Tato zpráva neobsahuje viry ani jiný škodlivý kód -avast! Antivirus je aktivní.



            • valentinstatescu
              asa,asa, baga ... Salutare.. ar trebuie sa mearga..cel putin teoretic ..are un CPLD tip Xilinx Xc9572 sau Xc9536 cu o schema asemanatoare ca aici :
              Message 6 of 8 , Dec 2, 2013

                asa,asa, baga



                ---In RomanianHomeComputer@yahoogroups.com, <yo3ghm@...> wrote:

                Salutare..

                ar trebuie sa mearga..cel putin "teoretic"..are un CPLD tip Xilinx Xc9572 sau Xc9536 cu o schema asemanatoare ca aici : http://www.jrok.com/project/speckey/spec_key.html,

                care "emuleaza" un port..mai exact portul 31 (zecimal) pentru Kempston.

                Nu am schema de la HC2K....acum in fata, nu mai tin minte daca HC-ul are deja "ocupat" portul 31 realizat pe placa de baza cu alte circuite.

                Exista riscul sa apare un "conflict" de date pe magistrala.

                 

                 



                ---In RomanianHomeComputer@yahoogroups.com, <payty@...> wrote:

                Salutare tuturor,

                Stiti cumva daca functioneaza interfata asta pe un hc-2000?
                http://www.ebay.com/itm/Brand-new-K-Mouse-Turbo-mouse-and-joystick-interface-for-the-ZX-Spectrum-/400599590966?pt=UK_VintageComputing_RL&hash=item5d4598a836
              • valentin statescu
                Da,dafoarte bine spus, YO3HAZ Salutare.. ar trebuie sa mearga..cel putin teoretic ..are un CPLD tip Xilinx Xc9572 sau Xc9536 cu o schema asemanatoare ca aici
                Message 7 of 8 , Dec 3, 2013
                   


                  Da,dafoarte bine spus,


                  YO3HAZ


                  Salutare..

                  ar trebuie sa mearga..cel putin "teoretic"..are un CPLD tip Xilinx Xc9572 sau Xc9536 cu o schema asemanatoare ca aici : http://www.jrok.com/project/speckey/spec_key.html,

                  care "emuleaza" un port..mai exact portul 31 (zecimal) pentru Kempston.

                  Nu am schema de la HC2K....acum in fata, nu mai tin minte daca HC-ul are deja "ocupat" portul 31 realizat pe placa de baza cu alte circuite.

                  Exista riscul sa apare un "conflict" de date pe magistrala.

                   

                   



                  ---In RomanianHomeComputer@yahoogroups.com, <payty@...> wrote:

                  Salutare tuturor,

                  Stiti cumva daca functioneaza interfata asta pe un hc-2000?
                  http://www.ebay.com/itm/Brand-new-K-Mouse-Turbo-mouse-and-joystick-interface-for-the-ZX-Spectrum-/400599590966?pt=UK_VintageComputing_RL&hash=item5d4598a836



                  Portalul Kappa - Trimite o felicitare de Pasti
                • payty
                  a sosit interfata si am testat-o. functioneaza perfect.
                  Message 8 of 8 , Dec 10, 2013

                    a sosit interfata si am testat-o. functioneaza perfect.

                  Your message has been successfully submitted and would be delivered to recipients shortly.