Loading ...
Sorry, an error occurred while loading the content.

blade maintenace

Expand Messages
  • jeff
    Has anyone used oil or some sort or even PAM or something? to help keep grass and grass juices from sticking to the blades? I use a plastic putty knife to
    Message 1 of 5 , Mar 27, 2013
    • 0 Attachment
      Has anyone used oil or some sort or even PAM or something? to help keep grass and grass juices from sticking to the blades?
      I use a plastic putty knife to clean around them but blades get build up.

      [Non-text portions of this message have been removed]
    • Danny Miller
      For me, sticking to the blade wad not a big problem, but sticking up the blade wells WAS, with the wrong grass height and wetness. Eventually you end up with
      Message 2 of 5 , Mar 27, 2013
      • 0 Attachment
        For me, sticking to the blade wad not a big problem, but sticking up the
        blade wells WAS, with the wrong grass height and wetness. Eventually
        you end up with the well filled except for the path of the blade itself
        with little clearance.

        PAM will go rancid. So don't.

        I tried Teflon dry lube at first, but it didn't stick for long. White
        lithium grease worked best, it sticks for "awhile". Seems to delay
        caking in the wells for about 1-2 hrs, and makes it easier to clean out
        the gunk for a bit longer than that. But it won't last forever.

        Danny

        On 3/27/2013 3:02 PM, jeff wrote:
        > Has anyone used oil or some sort or even PAM or something? to help keep grass and grass juices from sticking to the blades?
        > I use a plastic putty knife to clean around them but blades get build up.
        >
        > [Non-text portions of this message have been removed]
        >
        >
        >
        > ------------------------------------
        >
        > Yahoo! Groups Links
        >
        >
        >
        >
      • rann_georgia
        I have not had that issue. But, I usually start the mower manually and after the dew has gone. I usually let it run for its battery time of three hours plus
        Message 3 of 5 , Mar 28, 2013
        • 0 Attachment
          I have not had that issue. But, I usually start the mower manually and after the dew has gone. I usually let it run for its battery time of three hours plus and haven't noticed any such problems.

          I've had more problems with the wire after a neighbor decided to dig up her part of the adjoining yard and breaking the wire.

          After fixing it and then trying to track the breaks, I just dedicated an afternoon of soldering and sealing the wire.

          I have an old soldering iron that is large and good for basic jobs; something my father had. I solder any known breaks, tape it and then apply liquid black tape which is kind of like a glue that makes it waterproof.

          The other problem I've had is with tree roots coming up and causing the unit to stall. That required taking apart the unit and replacing the bushings.

          One thing I've learned is that the charging station is one of the weak points of this type of system. Lightening took out one and harsh weather and winds shorted out the second.

          Now I run two zones with a battery operated transmitter. When it's done, I take it in the house where it's safe from thief and lightening.

          I also bought the indoor charger for around 30 bucks, keep the transformer under a roof and charge it that way. Lightening is this type of mower's biggest weakness.


          --- In RoboMower@yahoogroups.com, jeff <rainycityguy@...> wrote:
          >us
          > Has anyone used oil or some sort or even PAM or something? to help keep grass and grass juices from sticking to the blades?
          > I use a plastic putty knife to clean around them but blades get build up.
          >
          > [Non-text portions of this message have been removed]
          >
        • Charles Grenkow
          I just started using Easy Off oven cleaner to clean up the blade wells of all the dark brown stained-in dried grass. I use to clean that off with a pressure
          Message 4 of 5 , Apr 23, 2013
          • 0 Attachment
            I just started using 'Easy Off' oven cleaner to clean up the blade wells of all the dark brown stained-in dried grass. I use to clean that off with a pressure washer which always leaked into the inside and screwed up the circuit motherboard. Let the easyoff soak for 30- 45 mins then use rubber gloves and a wet paper towel and you'll be amazed how clean you get the bottom of the Robomower - remember to remover the blades 1st. after that I spray the bottom with silicone lube and/or white lithium grease wipe and let dry. I have not found anything to 'keep' the grass from sticking but at least there is a way to clean the surface so grass doesn't stick as easily.

            Cheers,
            Chuck




            To: RoboMower@yahoogroups.com
            From: rainycityguy@...
            Date: Wed, 27 Mar 2013 13:02:41 -0700
            Subject: [RoboMower] blade maintenace





            Has anyone used oil or some sort or even PAM or something? to help keep grass and grass juices from sticking to the blades?
            I use a plastic putty knife to clean around them but blades get build up.

            [Non-text portions of this message have been removed]






            [Non-text portions of this message have been removed]
          • ronald heinz
            I use pam ron heinz ________________________________ From: Charles Grenkow To: RoboMower@yahoogroups.com
            Message 5 of 5 , Apr 24, 2013
            • 0 Attachment
              I use pam ron heinz


              ________________________________
              From: Charles Grenkow <cgrenkow@...>
              To: "RoboMower@yahoogroups.com" <robomower@yahoogroups.com>
              Sent: Tuesday, April 23, 2013 10:19 AM
              Subject: RE: [RoboMower] blade maintenace

               

              I just started using 'Easy Off' oven cleaner to clean up the blade wells of all the dark brown stained-in dried grass. I use to clean that off with a pressure washer which always leaked into the inside and screwed up the circuit motherboard. Let the easyoff soak for 30- 45 mins then use rubber gloves and a wet paper towel and you'll be amazed how clean you get the bottom of the Robomower - remember to remover the blades 1st. after that I spray the bottom with silicone lube and/or white lithium grease wipe and let dry. I have not found anything to 'keep' the grass from sticking but at least there is a way to clean the surface so grass doesn't stick as easily.

              Cheers,
              Chuck


              To: mailto:RoboMower%40yahoogroups.com
              From: mailto:rainycityguy%40yahoo.com
              Date: Wed, 27 Mar 2013 13:02:41 -0700
              Subject: [RoboMower] blade maintenace

              Has anyone used oil or some sort or even PAM or something? to help keep grass and grass juices from sticking to the blades?
              I use a plastic putty knife to clean around them but blades get build up.

              [Non-text portions of this message have been removed]



              [Non-text portions of this message have been removed]




              [Non-text portions of this message have been removed]
            Your message has been successfully submitted and would be delivered to recipients shortly.