RE: [RoboMower] Robomow RL1000 Cutting Height Adjustment Problem
- Hi Mike,
You just need to manually retract the locking tab. It is located where the
adjusting nut meets the body at the center rear of the caster assembly. Just
take a screwdriver or similar tool and pry it back from the locking notch.
That should release it. Some of these seem to settle in and not jump out of
the notch as they should when rotational pressure is applied.
Its nice to see some spring activity here. My own grass here in the north
east is finally greening up a bit but not quite ready to mow.
215-886-4717 x 11
sjones at probotics.com
From: RoboMower@yahoogroups.com [mailto:RoboMower@yahoogroups.com] On Behalf
Sent: Monday, April 07, 2008 9:48 AM
Subject: [RoboMower] Robomow RL1000 Cutting Height Adjustment Problem
My front wheel's height adjuster is stuck on the highest setting -
completely stuck. Even with a pair of heavy gloves on and with both
hands twisting as hard as I can it doesn't move an inch.
I've only noticed this problem this season - last year (the first year
I bought it) I adjusted the height with no problems.
Does anyone have any idea what to try?