Loading ...
Sorry, an error occurred while loading the content.

18473Re: [RoboMower] Re: RL800 Perimeter Problems

Expand Messages
  • Roy Hughes
    Mar 19, 2013
    • 0 Attachment
      That sounds like a good idea.  I solved the problem by robbing the sensors from my old 550 and putting them on.  
       
       
      ~Roy Hughes
      "I'm not here for a long time . . . I'm here for a good time."  George Strait

       
       



      >________________________________
      > From: zz <kyle@...>
      >To: RoboMower@yahoogroups.com
      >Sent: Tuesday, March 19, 2013 10:57 AM
      >Subject: [RoboMower] Re: RL800 Perimeter Problems
      >
      >

      >Greetings,
      >
      >I've never had this particular problem, but once in a while the mower does tend to not `see' the wire. When this happens I remove the case, blow out dust and reseat all of the connectors. Then the problem goes away.
      >
      >--- In RoboMower@yahoogroups.com, Roy Hughes <rctogether1@...> wrote:
      >>
      >> I'm a long time robomower user.  I'm having a problem.  The RM, on start-up, proceeds to the perimeter wire, pauses as it reaches it, then continues straight instead of turning and following the perimeter wire.  It does this on startup, "learn edge", and "wire position."  It does this in all 3 zones.  If "edge" is skipped, it works in scan mode - stopping at the perimeter and traveling in reverse.  So it recognizes the wire signal and it stops at the wire signal, it just won't follow the wire signal around the perimeter.  Anyone had this happen?
      >>  
      >>  
      >> ~Roy Hughes
      >> "I'm not here for a long time . . . I'm here for a good time."  George Strait
      >>
      >> [Non-text portions of this message have been removed]
      >>
      >
      >
      >
      >
      >

      [Non-text portions of this message have been removed]
    • Show all 4 messages in this topic