Loading ...
Sorry, an error occurred while loading the content.
 
  • Back
  • About Group

  • Join Group
, added in the last 7 days
New MessagesSee All
  • Re: Testing TNC-pi

    Bob, IÆm not familiar with aprx, but generally you have to run i2ckiss to present the TNC as a kiss interface to the application, either directly or via

    gm8bpq 7 days ago
  • Re: Testing TNC-pi

    No worries, you had me going there for a min. lol Thans

    w5evh 7 days ago
  • Re: Testing TNC-pi

    Hi John, Thanks for the info. This worked like a charm. I was able to change the address to 3. If I setup two TNC-pi's, how do I tell APRX to address each

    w5evh 7 days ago
Fetching Sponsored Content...

Group Description

This is a place for Amateur Radio Ops to discuss the Raspberry Pi and how it can be applied to Ham Radio.
This is a moderated Group. Please keep posts civil and on topic. (Any discussion of the RPi is welcome) Please provide a Ham Callsign when joining, if you have one .. It is not a requirement. I Encourage you to consider a Ham License, there is a whole other world out there waiting for you. All are welcome.



The photo shows a Pi fitted with a special version of the TNC-X Packet Radio TNC. See www.tnc-x.com/TNCPi.htm for details.



73 Jerry Kutche N9LYA
-Group Owner.

Group Information

Group Settings

  • This is a restricted group.
  • Attachments are permitted.
  • Members cannot hide email address.
  • Listed in Yahoo Groups directory.
  • Membership requires approval.
  • Messages require approval.
  • All members can post messages.

Message History