Loading ...
Sorry, an error occurred while loading the content.

Re: XASTIR USB WX Dongle Device Name

Expand Messages
  • kb4jhu
    Ray, Took your suggestion and booted up and plugin the dongle. Looks like it loaded as USB device number 5: /var/log/syslog: usb 1-1.2: new full-speed USB
    Message 1 of 8 , Jul 28, 2013
    • 0 Attachment
      Ray,

      Took your suggestion and booted up and plugin the dongle. Looks like it loaded as USB device number 5:


      /var/log/syslog:
      usb 1-1.2: new full-speed USB device number 5 using dwc_otg
      usb 1-1.2: New USB device found, idVendor=110a, idProduct=1110
      usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
      usb 1-1.2: Product: UPort 1110
      1-1.2: Manufacturer: Moxa Technologies Co., Ltd.
      usb 1-1.2: SerialNumber: 000404
      checking bus 1, device 5: "/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.2"
      bus: 1, device: 5 was not an MTP device

      pi@raspberrypi ~ $ lsusb
      Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
      Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
      Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.
      Bus 001 Device 004: ID 04d9:2519 Holtek Semiconductor, Inc.

      pi@raspberrypi ~ $ lsusb -t
      1-1.2:1.0: No such file or directory
      /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
      |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/3p, 480M
      |__ Port 1: Dev 3, If 0, Class=vend., Driver=smsc95xx, 480M
      |__ Port 2: Dev 5, If 0, Class=vend., Driver=, 12M
      |__ Port 3: Dev 4, If 0, Class=HID, Driver=usbhid, 1.5M
      |__ Port 3: Dev 4, If 1, Class=HID, Driver=usbhid, 1.5M

      pi@raspberrypi ~ $ lsusb -s 1:5
      Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.

      Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.
      Couldn't open device, some information will be missing
      Device Descriptor:
      bLength 18
      bDescriptorType 1
      bcdUSB 2.00
      bDeviceClass 255 Vendor Specific Class
      bDeviceSubClass 0
      bDeviceProtocol 0
      bMaxPacketSize0 8
      idVendor 0x110a Moxa Technologies Co., Ltd.
      idProduct 0x1110
      bcdDevice 2.00
      iManufacturer 1
      iProduct 2
      iSerial 3
      bNumConfigurations 1
      Configuration Descriptor:
      bLength 9
      bDescriptorType 2
      wTotalLength 25
      bNumInterfaces 1
      bConfigurationValue 1
      iConfiguration 0
      bmAttributes 0xa0
      (Bus Powered)
      Remote Wakeup
      MaxPower 100mA
      Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 0
      bInterfaceProtocol 0
      iInterface 0
      Endpoint Descriptor:
      bLength 7
      bDescriptorType 5
      bEndpointAddress 0x01 EP 1 OUT
      bmAttributes 2
      Transfer Type Bulk
      Synch Type None
      Usage Type Data
      wMaxPacketSize 0x0040 1x 64 bytes
      bInterval 0



      Driver name is too long for the WX Serial device of: /sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.2

      Also tried /dev/ttyUSB5 as well as the device name with no luck. Other suggestions??

      -Michael KB4JHU

      --- In Raspberry_Pi_4-Ham_RADIO@yahoogroups.com, Ray Wells <vk2tv@...> wrote:
      >
      > Leave the device unplugged and boot the Pi. Plug the device in and have
      > a look towards the end of /var/log/syslog. If the device was recognised
      > you should see reference to the device and /dev/ttyUSB# where # is the
      > number allocated - ttyUSB1, etc.
      >
      > Ray vk2tv
      >
      > On 28/07/13 11:57, kb4jhu wrote:
      > >
      > > I have a Raspberry Pi running XASTIR using the TNC-PI. I have the
      > > system working with APRS and now desire to connect my Peet Brothers
      > > Altermeter 800 serial weather station to XASTIR.
      > >
      > > I am having a problem finding the ttyUSB port that is assigned. I have
      > > setup the "serial WX" under Interface Control/configure WX Port. Can
      > > anyone help me figure out the "weather station device" for the USB dongle?
      > >
      > > --------------------------------
      > >
      > > Per the var/log/syslog states:
      > > usb 1-1.2: new full-speed USB device number 4 using dwc_otg
      > > usb 1-1.2: New USB device found, idVendor=110a, idProduct=1110
      > > usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
      > > usb 1-1.2: Product: UPort 1110
      > > Manufacturer: Moxa Technologies Co., Ltd.
      > > usb 1-1.2: SerialNumber: 000404
      > >
      > > -----------------------------------------------------
      > >
      > > The Dongle is a Moxa UPort 1110 so the system loaded the driver.
      > >
      > > Now the part I get confused. What /dev/ttyUSB4? is needed for "weather
      > > station device" I have tried several commands to include ls -l
      > > /dev/USB* with no luck finding the /dev for the serial USB dongle.
      > >
      > > Any help is appreciated.
      > >
      > > Michael KB4JHU
      > >
      > >
      >
    • John Hays
      Unplug ls /dev/tty* Plug in ls /dev/try* see if new tty device. Sent from my iPhone
      Message 2 of 8 , Jul 28, 2013
      • 0 Attachment
        Unplug

        ls /dev/tty*

        Plug in

        ls /dev/try*

        see if new tty device. 

        Sent from my iPhone

        On Jul 28, 2013, at 8:04 AM, "kb4jhu" <kb4jhu@...> wrote:

         

        Ray,

        Took your suggestion and booted up and plugin the dongle. Looks like it loaded as USB device number 5:

        /var/log/syslog:
        usb 1-1.2: new full-speed USB device number 5 using dwc_otg
        usb 1-1.2: New USB device found, idVendor=110a, idProduct=1110
        usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
        usb 1-1.2: Product: UPort 1110
        1-1.2: Manufacturer: Moxa Technologies Co., Ltd.
        usb 1-1.2: SerialNumber: 000404
        checking bus 1, device 5: "/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.2"
        bus: 1, device: 5 was not an MTP device

        pi@raspberrypi ~ $ lsusb
        Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
        Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
        Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
        Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.
        Bus 001 Device 004: ID 04d9:2519 Holtek Semiconductor, Inc.

        pi@raspberrypi ~ $ lsusb -t
        1-1.2:1.0: No such file or directory
        /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
        |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/3p, 480M
        |__ Port 1: Dev 3, If 0, Class=vend., Driver=smsc95xx, 480M
        |__ Port 2: Dev 5, If 0, Class=vend., Driver=, 12M
        |__ Port 3: Dev 4, If 0, Class=HID, Driver=usbhid, 1.5M
        |__ Port 3: Dev 4, If 1, Class=HID, Driver=usbhid, 1.5M

        pi@raspberrypi ~ $ lsusb -s 1:5
        Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.

        Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.
        Couldn't open device, some information will be missing
        Device Descriptor:
        bLength 18
        bDescriptorType 1
        bcdUSB 2.00
        bDeviceClass 255 Vendor Specific Class
        bDeviceSubClass 0
        bDeviceProtocol 0
        bMaxPacketSize0 8
        idVendor 0x110a Moxa Technologies Co., Ltd.
        idProduct 0x1110
        bcdDevice 2.00
        iManufacturer 1
        iProduct 2
        iSerial 3
        bNumConfigurations 1
        Configuration Descriptor:
        bLength 9
        bDescriptorType 2
        wTotalLength 25
        bNumInterfaces 1
        bConfigurationValue 1
        iConfiguration 0
        bmAttributes 0xa0
        (Bus Powered)
        Remote Wakeup
        MaxPower 100mA
        Interface Descriptor:
        bLength 9
        bDescriptorType 4
        bInterfaceNumber 0
        bAlternateSetting 0
        bNumEndpoints 1
        bInterfaceClass 255 Vendor Specific Class
        bInterfaceSubClass 0
        bInterfaceProtocol 0
        iInterface 0
        Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x01 EP 1 OUT
        bmAttributes 2
        Transfer Type Bulk
        Synch Type None
        Usage Type Data
        wMaxPacketSize 0x0040 1x 64 bytes
        bInterval 0

        Driver name is too long for the WX Serial device of: /sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.2

        Also tried /dev/ttyUSB5 as well as the device name with no luck. Other suggestions??

        -Michael KB4JHU

        --- In Raspberry_Pi_4-Ham_RADIO@yahoogroups.com, Ray Wells <vk2tv@...> wrote:
        >
        > Leave the device unplugged and boot the Pi. Plug the device in and have
        > a look towards the end of /var/log/syslog. If the device was recognised
        > you should see reference to the device and /dev/ttyUSB# where # is the
        > number allocated - ttyUSB1, etc.
        >
        > Ray vk2tv
        >
        > On 28/07/13 11:57, kb4jhu wrote:
        > >
        > > I have a Raspberry Pi running XASTIR using the TNC-PI. I have the
        > > system working with APRS and now desire to connect my Peet Brothers
        > > Altermeter 800 serial weather station to XASTIR.
        > >
        > > I am having a problem finding the ttyUSB port that is assigned. I have
        > > setup the "serial WX" under Interface Control/configure WX Port. Can
        > > anyone help me figure out the "weather station device" for the USB dongle?
        > >
        > > --------------------------------
        > >
        > > Per the var/log/syslog states:
        > > usb 1-1.2: new full-speed USB device number 4 using dwc_otg
        > > usb 1-1.2: New USB device found, idVendor=110a, idProduct=1110
        > > usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
        > > usb 1-1.2: Product: UPort 1110
        > > Manufacturer: Moxa Technologies Co., Ltd.
        > > usb 1-1.2: SerialNumber: 000404
        > >
        > > -----------------------------------------------------
        > >
        > > The Dongle is a Moxa UPort 1110 so the system loaded the driver.
        > >
        > > Now the part I get confused. What /dev/ttyUSB4? is needed for "weather
        > > station device" I have tried several commands to include ls -l
        > > /dev/USB* with no luck finding the /dev for the serial USB dongle.
        > >
        > > Any help is appreciated.
        > >
        > > Michael KB4JHU
        > >
        > >
        >

      • kb4jhu
        Thanks. Used that command and found no ttyUSB* listed. I changed out USB Hub. Same results no ttyUSB* found. Finally changed out USB dongle. Yep...
        Message 3 of 8 , Jul 28, 2013
        • 0 Attachment
          Thanks. Used that command and found no ttyUSB* listed. I changed out USB Hub. Same results no ttyUSB* found.

          Finally changed out USB dongle. Yep... Prolific driver loaded and assigned ttyUSB0. Got it working...

          Wx station is KB4JHU-15.

          Thanks for all the help!

          -Michael KB4JHU

          --- In Raspberry_Pi_4-Ham_RADIO@yahoogroups.com, John Hays <john@...> wrote:
          >
          > Unplug
          >
          > ls /dev/tty*
          >
          > Plug in
          >
          > ls /dev/try*
          >
          > see if new tty device.
          >
          > Sent from my iPhone
          >
        • Ray Wells
          Michael, This is what I see on my system when I attached an usb/rs232 device. For convenience I did this on my Dell desktop system but the result on the Pi
          Message 4 of 8 , Jul 28, 2013
          • 0 Attachment
            Michael,

            This is what I see on my system when I attached an usb/rs232 device. For convenience I did this on my Dell desktop system but the result on the Pi would be very similar, especially the line in syslog about the device being attached to /dev/ttyUSB(#)

            vk2tv@gizmo ~ $ lsusb <device not attached>
            Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
            Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
            Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
            Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
            Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
            Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
            Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
            vk2tv@gizmo ~ $

            vk2tv@gizmo ~ $ lsusb <device attached>
            Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
            Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
            Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
            Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
            Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
            Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
            Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
            Bus 004 Device 002: ID 0557:2008 ATEN International Co., Ltd UC-232A Serial Port [pl2303]
            vk2tv@gizmo ~ $

            vk2tv@gizmo ~ $ lsmod
            Module                  Size  Used by
            pl2303                 17993  0
            usbserial              47107  1 pl2303

            <list severely trimmed to save space>
            vk2tv@gizmo ~ $

            From the end of /var/log/syslog ...

            Jul 29 09:41:56 gizmo kernel: [ 3121.984016] usb 4-2: new full speed USB device number 4 using uhci_hcd
            Jul 29 09:41:56 gizmo mtp-probe: checking bus 4, device 4: "/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2"
            Jul 29 09:41:56 gizmo kernel: [ 3122.205095] pl2303 4-2:1.0: pl2303 converter detected
            Jul 29 09:41:56 gizmo kernel: [ 3122.217108] usb 4-2: pl2303 converter now attached to ttyUSB0
            Jul 29 09:41:56 gizmo mtp-probe: bus: 4, device: 4 was not an MTP device

            Did you check lsmod to see if the module is loaded?

            Ray vk2tv

            On 29/07/13 01:04, kb4jhu wrote:
             

            Ray,

            Took your suggestion and booted up and plugin the dongle. Looks like it loaded as USB device number 5:

            /var/log/syslog:
            usb 1-1.2: new full-speed USB device number 5 using dwc_otg
            usb 1-1.2: New USB device found, idVendor=110a, idProduct=1110
            usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
            usb 1-1.2: Product: UPort 1110
            1-1.2: Manufacturer: Moxa Technologies Co., Ltd.
            usb 1-1.2: SerialNumber: 000404
            checking bus 1, device 5: "/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.2"
            bus: 1, device: 5 was not an MTP device

            pi@raspberrypi ~ $ lsusb
            Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
            Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
            Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
            Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.
            Bus 001 Device 004: ID 04d9:2519 Holtek Semiconductor, Inc.

            pi@raspberrypi ~ $ lsusb -t
            1-1.2:1.0: No such file or directory
            /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
            |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/3p, 480M
            |__ Port 1: Dev 3, If 0, Class=vend., Driver=smsc95xx, 480M
            |__ Port 2: Dev 5, If 0, Class=vend., Driver=, 12M
            |__ Port 3: Dev 4, If 0, Class=HID, Driver=usbhid, 1.5M
            |__ Port 3: Dev 4, If 1, Class=HID, Driver=usbhid, 1.5M

            pi@raspberrypi ~ $ lsusb -s 1:5
            Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.

            Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.
            Couldn't open device, some information will be missing
            Device Descriptor:
            bLength 18
            bDescriptorType 1
            bcdUSB 2.00
            bDeviceClass 255 Vendor Specific Class
            bDeviceSubClass 0
            bDeviceProtocol 0
            bMaxPacketSize0 8
            idVendor 0x110a Moxa Technologies Co., Ltd.
            idProduct 0x1110
            bcdDevice 2.00
            iManufacturer 1
            iProduct 2
            iSerial 3
            bNumConfigurations 1
            Configuration Descriptor:
            bLength 9
            bDescriptorType 2
            wTotalLength 25
            bNumInterfaces 1
            bConfigurationValue 1
            iConfiguration 0
            bmAttributes 0xa0
            (Bus Powered)
            Remote Wakeup
            MaxPower 100mA
            Interface Descriptor:
            bLength 9
            bDescriptorType 4
            bInterfaceNumber 0
            bAlternateSetting 0
            bNumEndpoints 1
            bInterfaceClass 255 Vendor Specific Class
            bInterfaceSubClass 0
            bInterfaceProtocol 0
            iInterface 0
            Endpoint Descriptor:
            bLength 7
            bDescriptorType 5
            bEndpointAddress 0x01 EP 1 OUT
            bmAttributes 2
            Transfer Type Bulk
            Synch Type None
            Usage Type Data
            wMaxPacketSize 0x0040 1x 64 bytes
            bInterval 0

            Driver name is too long for the WX Serial device of: /sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.2

            Also tried /dev/ttyUSB5 as well as the device name with no luck. Other suggestions??

            -Michael KB4JHU

            --- In Raspberry_Pi_4-Ham_RADIO@yahoogroups.com, Ray Wells <vk2tv@...> wrote:
            >
            > Leave the device unplugged and boot the Pi. Plug the device in and have
            > a look towards the end of /var/log/syslog. If the device was recognised
            > you should see reference to the device and /dev/ttyUSB# where # is the
            > number allocated - ttyUSB1, etc.
            >
            > Ray vk2tv
            >
            > On 28/07/13 11:57, kb4jhu wrote:
            > >
            > > I have a Raspberry Pi running XASTIR using the TNC-PI. I have the
            > > system working with APRS and now desire to connect my Peet Brothers
            > > Altermeter 800 serial weather station to XASTIR.
            > >
            > > I am having a problem finding the ttyUSB port that is assigned. I have
            > > setup the "serial WX" under Interface Control/configure WX Port. Can
            > > anyone help me figure out the "weather station device" for the USB dongle?
            > >
            > > --------------------------------
            > >
            > > Per the var/log/syslog states:
            > > usb 1-1.2: new full-speed USB device number 4 using dwc_otg
            > > usb 1-1.2: New USB device found, idVendor=110a, idProduct=1110
            > > usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
            > > usb 1-1.2: Product: UPort 1110
            > > Manufacturer: Moxa Technologies Co., Ltd.
            > > usb 1-1.2: SerialNumber: 000404
            > >
            > > -----------------------------------------------------
            > >
            > > The Dongle is a Moxa UPort 1110 so the system loaded the driver.
            > >
            > > Now the part I get confused. What /dev/ttyUSB4? is needed for "weather
            > > station device" I have tried several commands to include ls -l
            > > /dev/USB* with no luck finding the /dev for the serial USB dongle.
            > >
            > > Any help is appreciated.
            > >
            > > Michael KB4JHU
            > >
            > >
            >


          • Wolfgang
            Hello , I am trying to get KLOG to work. Things work well, but I only can not get a connection with hamlib. I use the same parameters as for other programs
            Message 5 of 8 , Jul 29, 2013
            • 0 Attachment
              Hello ,
              I am trying to get KLOG to work. Things work well, but I only can not
              get a connection with hamlib.
              I use the same parameters as for other programs (like GRIG, FLDIGI):

              300msec
              FT-857
              /dev/ttyUSB0
              38400

              But I always get a message saying that KLOG can not establish a
              connection to my transceiver.

              What am I doing wrong??

              73, Wolfgang, dl7nb
            • The Silver Fox
              Try lsusb. From: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com [mailto:Raspberry_Pi_4-Ham_RADIO@yahoogroups.com] On Behalf Of kb4jhu Sent: Sunday, July 28, 2013
              Message 6 of 8 , Jul 29, 2013
              • 0 Attachment

                Try lsusb.

                 

                 

                From: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com [mailto:Raspberry_Pi_4-Ham_RADIO@yahoogroups.com] On Behalf Of kb4jhu
                Sent: Sunday, July 28, 2013 3:12 PM
                To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
                Subject: [Raspberry_Pi_4-Ham_RADIO] Re: XASTIR USB WX Dongle Device Name

                 

                 

                Thanks. Used that command and found no ttyUSB* listed. I changed out USB Hub. Same results no ttyUSB* found.

                Finally changed out USB dongle. Yep... Prolific driver loaded and assigned ttyUSB0. Got it working...

                Wx station is KB4JHU-15.

                Thanks for all the help!

                -Michael KB4JHU

                --- In Raspberry_Pi_4-Ham_RADIO@yahoogroups.com, John Hays <john@...> wrote:
                >
                > Unplug
                >
                > ls /dev/tty*
                >
                > Plug in
                >
                > ls /dev/try*
                >
                > see if new tty device.
                >
                > Sent from my iPhone
                >

              Your message has been successfully submitted and would be delivered to recipients shortly.