Loading ...
Sorry, an error occurred while loading the content.

XASTIR USB WX Dongle Device Name

Expand Messages
  • kb4jhu
    I have a Raspberry Pi running XASTIR using the TNC-PI. I have the system working with APRS and now desire to connect my Peet Brothers Altermeter 800 serial
    Message 1 of 8 , Jul 27, 2013
    • 0 Attachment
      I have a Raspberry Pi running XASTIR using the TNC-PI. I have the system working with APRS and now desire to connect my Peet Brothers Altermeter 800 serial weather station to XASTIR.

      I am having a problem finding the ttyUSB port that is assigned. I have setup the "serial WX" under Interface Control/configure WX Port. Can anyone help me figure out the "weather station device" for the USB dongle?

      --------------------------------

      Per the var/log/syslog states:
      usb 1-1.2: new full-speed USB device number 4 using dwc_otg
      usb 1-1.2: New USB device found, idVendor=110a, idProduct=1110
      usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
      usb 1-1.2: Product: UPort 1110
      Manufacturer: Moxa Technologies Co., Ltd.
      usb 1-1.2: SerialNumber: 000404

      -----------------------------------------------------

      The Dongle is a Moxa UPort 1110 so the system loaded the driver.

      Now the part I get confused. What /dev/ttyUSB4? is needed for "weather station device" I have tried several commands to include ls -l /dev/USB* with no luck finding the /dev for the serial USB dongle.

      Any help is appreciated.

      Michael KB4JHU
    • Ray Wells
      Leave the device unplugged and boot the Pi. Plug the device in and have a look towards the end of /var/log/syslog. If the device was recognised you should see
      Message 2 of 8 , Jul 28, 2013
      • 0 Attachment
        Leave the device unplugged and boot the Pi. Plug the device in and have a look towards the end of /var/log/syslog. If the device was recognised you should see reference to the device and /dev/ttyUSB# where # is the number allocated - ttyUSB1, etc.

        Ray vk2tv

        On 28/07/13 11:57, kb4jhu wrote:
         

        I have a Raspberry Pi running XASTIR using the TNC-PI. I have the system working with APRS and now desire to connect my Peet Brothers Altermeter 800 serial weather station to XASTIR.

        I am having a problem finding the ttyUSB port that is assigned. I have setup the "serial WX" under Interface Control/configure WX Port. Can anyone help me figure out the "weather station device" for the USB dongle?

        --------------------------------

        Per the var/log/syslog states:
        usb 1-1.2: new full-speed USB device number 4 using dwc_otg
        usb 1-1.2: New USB device found, idVendor=110a, idProduct=1110
        usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
        usb 1-1.2: Product: UPort 1110
        Manufacturer: Moxa Technologies Co., Ltd.
        usb 1-1.2: SerialNumber: 000404

        -----------------------------------------------------

        The Dongle is a Moxa UPort 1110 so the system loaded the driver.

        Now the part I get confused. What /dev/ttyUSB4? is needed for "weather station device" I have tried several commands to include ls -l /dev/USB* with no luck finding the /dev for the serial USB dongle.

        Any help is appreciated.

        Michael KB4JHU


      • kb4jhu
        Ray, Took your suggestion and booted up and plugin the dongle. Looks like it loaded as USB device number 5: /var/log/syslog: usb 1-1.2: new full-speed USB
        Message 3 of 8 , Jul 28, 2013
        • 0 Attachment
          Ray,

          Took your suggestion and booted up and plugin the dongle. Looks like it loaded as USB device number 5:


          /var/log/syslog:
          usb 1-1.2: new full-speed USB device number 5 using dwc_otg
          usb 1-1.2: New USB device found, idVendor=110a, idProduct=1110
          usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
          usb 1-1.2: Product: UPort 1110
          1-1.2: Manufacturer: Moxa Technologies Co., Ltd.
          usb 1-1.2: SerialNumber: 000404
          checking bus 1, device 5: "/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.2"
          bus: 1, device: 5 was not an MTP device

          pi@raspberrypi ~ $ lsusb
          Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
          Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
          Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
          Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.
          Bus 001 Device 004: ID 04d9:2519 Holtek Semiconductor, Inc.

          pi@raspberrypi ~ $ lsusb -t
          1-1.2:1.0: No such file or directory
          /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
          |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/3p, 480M
          |__ Port 1: Dev 3, If 0, Class=vend., Driver=smsc95xx, 480M
          |__ Port 2: Dev 5, If 0, Class=vend., Driver=, 12M
          |__ Port 3: Dev 4, If 0, Class=HID, Driver=usbhid, 1.5M
          |__ Port 3: Dev 4, If 1, Class=HID, Driver=usbhid, 1.5M

          pi@raspberrypi ~ $ lsusb -s 1:5
          Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.

          Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.
          Couldn't open device, some information will be missing
          Device Descriptor:
          bLength 18
          bDescriptorType 1
          bcdUSB 2.00
          bDeviceClass 255 Vendor Specific Class
          bDeviceSubClass 0
          bDeviceProtocol 0
          bMaxPacketSize0 8
          idVendor 0x110a Moxa Technologies Co., Ltd.
          idProduct 0x1110
          bcdDevice 2.00
          iManufacturer 1
          iProduct 2
          iSerial 3
          bNumConfigurations 1
          Configuration Descriptor:
          bLength 9
          bDescriptorType 2
          wTotalLength 25
          bNumInterfaces 1
          bConfigurationValue 1
          iConfiguration 0
          bmAttributes 0xa0
          (Bus Powered)
          Remote Wakeup
          MaxPower 100mA
          Interface Descriptor:
          bLength 9
          bDescriptorType 4
          bInterfaceNumber 0
          bAlternateSetting 0
          bNumEndpoints 1
          bInterfaceClass 255 Vendor Specific Class
          bInterfaceSubClass 0
          bInterfaceProtocol 0
          iInterface 0
          Endpoint Descriptor:
          bLength 7
          bDescriptorType 5
          bEndpointAddress 0x01 EP 1 OUT
          bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
          wMaxPacketSize 0x0040 1x 64 bytes
          bInterval 0



          Driver name is too long for the WX Serial device of: /sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.2

          Also tried /dev/ttyUSB5 as well as the device name with no luck. Other suggestions??

          -Michael KB4JHU

          --- In Raspberry_Pi_4-Ham_RADIO@yahoogroups.com, Ray Wells <vk2tv@...> wrote:
          >
          > Leave the device unplugged and boot the Pi. Plug the device in and have
          > a look towards the end of /var/log/syslog. If the device was recognised
          > you should see reference to the device and /dev/ttyUSB# where # is the
          > number allocated - ttyUSB1, etc.
          >
          > Ray vk2tv
          >
          > On 28/07/13 11:57, kb4jhu wrote:
          > >
          > > I have a Raspberry Pi running XASTIR using the TNC-PI. I have the
          > > system working with APRS and now desire to connect my Peet Brothers
          > > Altermeter 800 serial weather station to XASTIR.
          > >
          > > I am having a problem finding the ttyUSB port that is assigned. I have
          > > setup the "serial WX" under Interface Control/configure WX Port. Can
          > > anyone help me figure out the "weather station device" for the USB dongle?
          > >
          > > --------------------------------
          > >
          > > Per the var/log/syslog states:
          > > usb 1-1.2: new full-speed USB device number 4 using dwc_otg
          > > usb 1-1.2: New USB device found, idVendor=110a, idProduct=1110
          > > usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
          > > usb 1-1.2: Product: UPort 1110
          > > Manufacturer: Moxa Technologies Co., Ltd.
          > > usb 1-1.2: SerialNumber: 000404
          > >
          > > -----------------------------------------------------
          > >
          > > The Dongle is a Moxa UPort 1110 so the system loaded the driver.
          > >
          > > Now the part I get confused. What /dev/ttyUSB4? is needed for "weather
          > > station device" I have tried several commands to include ls -l
          > > /dev/USB* with no luck finding the /dev for the serial USB dongle.
          > >
          > > Any help is appreciated.
          > >
          > > Michael KB4JHU
          > >
          > >
          >
        • John Hays
          Unplug ls /dev/tty* Plug in ls /dev/try* see if new tty device. Sent from my iPhone
          Message 4 of 8 , Jul 28, 2013
          • 0 Attachment
            Unplug

            ls /dev/tty*

            Plug in

            ls /dev/try*

            see if new tty device. 

            Sent from my iPhone

            On Jul 28, 2013, at 8:04 AM, "kb4jhu" <kb4jhu@...> wrote:

             

            Ray,

            Took your suggestion and booted up and plugin the dongle. Looks like it loaded as USB device number 5:

            /var/log/syslog:
            usb 1-1.2: new full-speed USB device number 5 using dwc_otg
            usb 1-1.2: New USB device found, idVendor=110a, idProduct=1110
            usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
            usb 1-1.2: Product: UPort 1110
            1-1.2: Manufacturer: Moxa Technologies Co., Ltd.
            usb 1-1.2: SerialNumber: 000404
            checking bus 1, device 5: "/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.2"
            bus: 1, device: 5 was not an MTP device

            pi@raspberrypi ~ $ lsusb
            Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
            Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
            Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
            Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.
            Bus 001 Device 004: ID 04d9:2519 Holtek Semiconductor, Inc.

            pi@raspberrypi ~ $ lsusb -t
            1-1.2:1.0: No such file or directory
            /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
            |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/3p, 480M
            |__ Port 1: Dev 3, If 0, Class=vend., Driver=smsc95xx, 480M
            |__ Port 2: Dev 5, If 0, Class=vend., Driver=, 12M
            |__ Port 3: Dev 4, If 0, Class=HID, Driver=usbhid, 1.5M
            |__ Port 3: Dev 4, If 1, Class=HID, Driver=usbhid, 1.5M

            pi@raspberrypi ~ $ lsusb -s 1:5
            Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.

            Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.
            Couldn't open device, some information will be missing
            Device Descriptor:
            bLength 18
            bDescriptorType 1
            bcdUSB 2.00
            bDeviceClass 255 Vendor Specific Class
            bDeviceSubClass 0
            bDeviceProtocol 0
            bMaxPacketSize0 8
            idVendor 0x110a Moxa Technologies Co., Ltd.
            idProduct 0x1110
            bcdDevice 2.00
            iManufacturer 1
            iProduct 2
            iSerial 3
            bNumConfigurations 1
            Configuration Descriptor:
            bLength 9
            bDescriptorType 2
            wTotalLength 25
            bNumInterfaces 1
            bConfigurationValue 1
            iConfiguration 0
            bmAttributes 0xa0
            (Bus Powered)
            Remote Wakeup
            MaxPower 100mA
            Interface Descriptor:
            bLength 9
            bDescriptorType 4
            bInterfaceNumber 0
            bAlternateSetting 0
            bNumEndpoints 1
            bInterfaceClass 255 Vendor Specific Class
            bInterfaceSubClass 0
            bInterfaceProtocol 0
            iInterface 0
            Endpoint Descriptor:
            bLength 7
            bDescriptorType 5
            bEndpointAddress 0x01 EP 1 OUT
            bmAttributes 2
            Transfer Type Bulk
            Synch Type None
            Usage Type Data
            wMaxPacketSize 0x0040 1x 64 bytes
            bInterval 0

            Driver name is too long for the WX Serial device of: /sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.2

            Also tried /dev/ttyUSB5 as well as the device name with no luck. Other suggestions??

            -Michael KB4JHU

            --- In Raspberry_Pi_4-Ham_RADIO@yahoogroups.com, Ray Wells <vk2tv@...> wrote:
            >
            > Leave the device unplugged and boot the Pi. Plug the device in and have
            > a look towards the end of /var/log/syslog. If the device was recognised
            > you should see reference to the device and /dev/ttyUSB# where # is the
            > number allocated - ttyUSB1, etc.
            >
            > Ray vk2tv
            >
            > On 28/07/13 11:57, kb4jhu wrote:
            > >
            > > I have a Raspberry Pi running XASTIR using the TNC-PI. I have the
            > > system working with APRS and now desire to connect my Peet Brothers
            > > Altermeter 800 serial weather station to XASTIR.
            > >
            > > I am having a problem finding the ttyUSB port that is assigned. I have
            > > setup the "serial WX" under Interface Control/configure WX Port. Can
            > > anyone help me figure out the "weather station device" for the USB dongle?
            > >
            > > --------------------------------
            > >
            > > Per the var/log/syslog states:
            > > usb 1-1.2: new full-speed USB device number 4 using dwc_otg
            > > usb 1-1.2: New USB device found, idVendor=110a, idProduct=1110
            > > usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
            > > usb 1-1.2: Product: UPort 1110
            > > Manufacturer: Moxa Technologies Co., Ltd.
            > > usb 1-1.2: SerialNumber: 000404
            > >
            > > -----------------------------------------------------
            > >
            > > The Dongle is a Moxa UPort 1110 so the system loaded the driver.
            > >
            > > Now the part I get confused. What /dev/ttyUSB4? is needed for "weather
            > > station device" I have tried several commands to include ls -l
            > > /dev/USB* with no luck finding the /dev for the serial USB dongle.
            > >
            > > Any help is appreciated.
            > >
            > > Michael KB4JHU
            > >
            > >
            >

          • kb4jhu
            Thanks. Used that command and found no ttyUSB* listed. I changed out USB Hub. Same results no ttyUSB* found. Finally changed out USB dongle. Yep...
            Message 5 of 8 , Jul 28, 2013
            • 0 Attachment
              Thanks. Used that command and found no ttyUSB* listed. I changed out USB Hub. Same results no ttyUSB* found.

              Finally changed out USB dongle. Yep... Prolific driver loaded and assigned ttyUSB0. Got it working...

              Wx station is KB4JHU-15.

              Thanks for all the help!

              -Michael KB4JHU

              --- In Raspberry_Pi_4-Ham_RADIO@yahoogroups.com, John Hays <john@...> wrote:
              >
              > Unplug
              >
              > ls /dev/tty*
              >
              > Plug in
              >
              > ls /dev/try*
              >
              > see if new tty device.
              >
              > Sent from my iPhone
              >
            • Ray Wells
              Michael, This is what I see on my system when I attached an usb/rs232 device. For convenience I did this on my Dell desktop system but the result on the Pi
              Message 6 of 8 , Jul 28, 2013
              • 0 Attachment
                Michael,

                This is what I see on my system when I attached an usb/rs232 device. For convenience I did this on my Dell desktop system but the result on the Pi would be very similar, especially the line in syslog about the device being attached to /dev/ttyUSB(#)

                vk2tv@gizmo ~ $ lsusb <device not attached>
                Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
                Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
                Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
                Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
                Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
                Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
                Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
                vk2tv@gizmo ~ $

                vk2tv@gizmo ~ $ lsusb <device attached>
                Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
                Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
                Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
                Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
                Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
                Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
                Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
                Bus 004 Device 002: ID 0557:2008 ATEN International Co., Ltd UC-232A Serial Port [pl2303]
                vk2tv@gizmo ~ $

                vk2tv@gizmo ~ $ lsmod
                Module                  Size  Used by
                pl2303                 17993  0
                usbserial              47107  1 pl2303

                <list severely trimmed to save space>
                vk2tv@gizmo ~ $

                From the end of /var/log/syslog ...

                Jul 29 09:41:56 gizmo kernel: [ 3121.984016] usb 4-2: new full speed USB device number 4 using uhci_hcd
                Jul 29 09:41:56 gizmo mtp-probe: checking bus 4, device 4: "/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2"
                Jul 29 09:41:56 gizmo kernel: [ 3122.205095] pl2303 4-2:1.0: pl2303 converter detected
                Jul 29 09:41:56 gizmo kernel: [ 3122.217108] usb 4-2: pl2303 converter now attached to ttyUSB0
                Jul 29 09:41:56 gizmo mtp-probe: bus: 4, device: 4 was not an MTP device

                Did you check lsmod to see if the module is loaded?

                Ray vk2tv

                On 29/07/13 01:04, kb4jhu wrote:
                 

                Ray,

                Took your suggestion and booted up and plugin the dongle. Looks like it loaded as USB device number 5:

                /var/log/syslog:
                usb 1-1.2: new full-speed USB device number 5 using dwc_otg
                usb 1-1.2: New USB device found, idVendor=110a, idProduct=1110
                usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
                usb 1-1.2: Product: UPort 1110
                1-1.2: Manufacturer: Moxa Technologies Co., Ltd.
                usb 1-1.2: SerialNumber: 000404
                checking bus 1, device 5: "/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.2"
                bus: 1, device: 5 was not an MTP device

                pi@raspberrypi ~ $ lsusb
                Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
                Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
                Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
                Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.
                Bus 001 Device 004: ID 04d9:2519 Holtek Semiconductor, Inc.

                pi@raspberrypi ~ $ lsusb -t
                1-1.2:1.0: No such file or directory
                /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
                |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/3p, 480M
                |__ Port 1: Dev 3, If 0, Class=vend., Driver=smsc95xx, 480M
                |__ Port 2: Dev 5, If 0, Class=vend., Driver=, 12M
                |__ Port 3: Dev 4, If 0, Class=HID, Driver=usbhid, 1.5M
                |__ Port 3: Dev 4, If 1, Class=HID, Driver=usbhid, 1.5M

                pi@raspberrypi ~ $ lsusb -s 1:5
                Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.

                Bus 001 Device 005: ID 110a:1110 Moxa Technologies Co., Ltd.
                Couldn't open device, some information will be missing
                Device Descriptor:
                bLength 18
                bDescriptorType 1
                bcdUSB 2.00
                bDeviceClass 255 Vendor Specific Class
                bDeviceSubClass 0
                bDeviceProtocol 0
                bMaxPacketSize0 8
                idVendor 0x110a Moxa Technologies Co., Ltd.
                idProduct 0x1110
                bcdDevice 2.00
                iManufacturer 1
                iProduct 2
                iSerial 3
                bNumConfigurations 1
                Configuration Descriptor:
                bLength 9
                bDescriptorType 2
                wTotalLength 25
                bNumInterfaces 1
                bConfigurationValue 1
                iConfiguration 0
                bmAttributes 0xa0
                (Bus Powered)
                Remote Wakeup
                MaxPower 100mA
                Interface Descriptor:
                bLength 9
                bDescriptorType 4
                bInterfaceNumber 0
                bAlternateSetting 0
                bNumEndpoints 1
                bInterfaceClass 255 Vendor Specific Class
                bInterfaceSubClass 0
                bInterfaceProtocol 0
                iInterface 0
                Endpoint Descriptor:
                bLength 7
                bDescriptorType 5
                bEndpointAddress 0x01 EP 1 OUT
                bmAttributes 2
                Transfer Type Bulk
                Synch Type None
                Usage Type Data
                wMaxPacketSize 0x0040 1x 64 bytes
                bInterval 0

                Driver name is too long for the WX Serial device of: /sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.2

                Also tried /dev/ttyUSB5 as well as the device name with no luck. Other suggestions??

                -Michael KB4JHU

                --- In Raspberry_Pi_4-Ham_RADIO@yahoogroups.com, Ray Wells <vk2tv@...> wrote:
                >
                > Leave the device unplugged and boot the Pi. Plug the device in and have
                > a look towards the end of /var/log/syslog. If the device was recognised
                > you should see reference to the device and /dev/ttyUSB# where # is the
                > number allocated - ttyUSB1, etc.
                >
                > Ray vk2tv
                >
                > On 28/07/13 11:57, kb4jhu wrote:
                > >
                > > I have a Raspberry Pi running XASTIR using the TNC-PI. I have the
                > > system working with APRS and now desire to connect my Peet Brothers
                > > Altermeter 800 serial weather station to XASTIR.
                > >
                > > I am having a problem finding the ttyUSB port that is assigned. I have
                > > setup the "serial WX" under Interface Control/configure WX Port. Can
                > > anyone help me figure out the "weather station device" for the USB dongle?
                > >
                > > --------------------------------
                > >
                > > Per the var/log/syslog states:
                > > usb 1-1.2: new full-speed USB device number 4 using dwc_otg
                > > usb 1-1.2: New USB device found, idVendor=110a, idProduct=1110
                > > usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
                > > usb 1-1.2: Product: UPort 1110
                > > Manufacturer: Moxa Technologies Co., Ltd.
                > > usb 1-1.2: SerialNumber: 000404
                > >
                > > -----------------------------------------------------
                > >
                > > The Dongle is a Moxa UPort 1110 so the system loaded the driver.
                > >
                > > Now the part I get confused. What /dev/ttyUSB4? is needed for "weather
                > > station device" I have tried several commands to include ls -l
                > > /dev/USB* with no luck finding the /dev for the serial USB dongle.
                > >
                > > Any help is appreciated.
                > >
                > > Michael KB4JHU
                > >
                > >
                >


              • Wolfgang
                Hello , I am trying to get KLOG to work. Things work well, but I only can not get a connection with hamlib. I use the same parameters as for other programs
                Message 7 of 8 , Jul 29, 2013
                • 0 Attachment
                  Hello ,
                  I am trying to get KLOG to work. Things work well, but I only can not
                  get a connection with hamlib.
                  I use the same parameters as for other programs (like GRIG, FLDIGI):

                  300msec
                  FT-857
                  /dev/ttyUSB0
                  38400

                  But I always get a message saying that KLOG can not establish a
                  connection to my transceiver.

                  What am I doing wrong??

                  73, Wolfgang, dl7nb
                • The Silver Fox
                  Try lsusb. From: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com [mailto:Raspberry_Pi_4-Ham_RADIO@yahoogroups.com] On Behalf Of kb4jhu Sent: Sunday, July 28, 2013
                  Message 8 of 8 , Jul 29, 2013
                  • 0 Attachment

                    Try lsusb.

                     

                     

                    From: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com [mailto:Raspberry_Pi_4-Ham_RADIO@yahoogroups.com] On Behalf Of kb4jhu
                    Sent: Sunday, July 28, 2013 3:12 PM
                    To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
                    Subject: [Raspberry_Pi_4-Ham_RADIO] Re: XASTIR USB WX Dongle Device Name

                     

                     

                    Thanks. Used that command and found no ttyUSB* listed. I changed out USB Hub. Same results no ttyUSB* found.

                    Finally changed out USB dongle. Yep... Prolific driver loaded and assigned ttyUSB0. Got it working...

                    Wx station is KB4JHU-15.

                    Thanks for all the help!

                    -Michael KB4JHU

                    --- In Raspberry_Pi_4-Ham_RADIO@yahoogroups.com, John Hays <john@...> wrote:
                    >
                    > Unplug
                    >
                    > ls /dev/tty*
                    >
                    > Plug in
                    >
                    > ls /dev/try*
                    >
                    > see if new tty device.
                    >
                    > Sent from my iPhone
                    >

                  Your message has been successfully submitted and would be delivered to recipients shortly.