Loading ...
Sorry, an error occurred while loading the content.

Re: Operational ? on TNC-Pi setup.

Expand Messages
  • w7sae
    Thanks John, I may choose to just connect to the remote system at the present time, at least we know that works. Someone will put the other stack together
    Message 1 of 7 , Jun 27, 2013
    • 0 Attachment
      Thanks John, I may choose to just connect to the remote system at the present time, at least we know that works. Someone will put the other stack together one of these days that works with the existing Pi - TNC kernel.
      73
      Dick W7SAE

      --- In Raspberry_Pi_4-Ham_RADIO@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
      >
      > Dick,
      >
      > That is a good question. I'm not aware of any that works with the Kernel
      > ax.25 (or I would have mentioned it!) Maybe others in the group know of
      > something.
      >
      > My LinBPQ package provides a network stack and node that replaces the Linux
      > Kernel software, and can route an incoming connect to a terminal window.
      > There are instructions for installing it at
      > https://dl.dropboxusercontent.com/u/31910649/InstallingLINBPQ.htm , but this
      > assumes some knowledge of the BPQ32 system. The main documentation for
      > BPQ32 is at www.g8bpq.org.uk. . Although slanted towards the Windows
      > version, most features are the same in both versions.
      >
      > 73, John
      >
      >
      >
      >
      > _____
      >
      > From: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
      > [mailto:Raspberry_Pi_4-Ham_RADIO@yahoogroups.com] On Behalf Of w7sae
      > Sent: 27 June 2013 18:07
      > To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
      > Subject: [Raspberry_Pi_4-Ham_RADIO] Re: Operational ? on TNC-Pi setup.
      >
      >
      >
      >
      > John,
      > Thank you for your response. That is about what I had concluded too. What is
      > the additional software you mentioned and where can it be obtained?
      > Dick W7SAE
      >
      > --- In Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
      > <mailto:Raspberry_Pi_4-Ham_RADIO%40yahoogroups.com> , "John Wiseman"
      > <john.wiseman@> wrote:
      > >
      > > Basically correct.
      > >
      > > axlisten is a monitoring package, not a way of receiving inbound
      > > connections. The kernal ax.25 software will accept a connection whether or
      > > not axlisten is running. But you need additonal software to allow that
      > > incoming connection to be presented to you so you can interact with it.
      > >
      > > 73, John G8BPQ
      > >
      > >
      > > _____
      > >
      > > From: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
      > <mailto:Raspberry_Pi_4-Ham_RADIO%40yahoogroups.com>
      > > [mailto:Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
      > <mailto:Raspberry_Pi_4-Ham_RADIO%40yahoogroups.com> ] On Behalf Of w7sae
      > > Sent: 26 June 2013 22:47
      > > To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
      > <mailto:Raspberry_Pi_4-Ham_RADIO%40yahoogroups.com>
      > > Subject: [Raspberry_Pi_4-Ham_RADIO] Operational ? on TNC-Pi setup.
      > >
      > >
      > >
      > >
      > > Just got the combination running but not sure if this is a problem or an
      > > operational error: If I do axcall 1 w7sae-5 I can connect to that station
      > > and send and receive text just fine. If I do axlisten -a and w7sae-5
      > > connects to me I see his messages but don't know how to respond or is it
      > is
      > > even possible under that condition. w7sae-5 shows it is connected but the
      > > TNC-Pi shows no connection message although it gets the text he sends. So
      > is
      > > the answer if I want to talk with another packet station I need to
      > initiate
      > > the connection and if he initiates the session I can only read his message
      > > text and not respond? Dick W7SAE
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.