Loading ...
Sorry, an error occurred while loading the content.

Re: [Raspberry_Pi_4-Ham_RADIO] SHH > PI from WAN

Expand Messages
  • Bob Scanferla
    I think what you are saying is that your PI is on an internal address behind your router whose WAN port has the NO-IP static address. SO you either need to put
    Message 1 of 4 , Apr 27, 2013
    • 0 Attachment
      I think what you are saying is that your PI is on an internal address behind your router whose WAN port has the NO-IP static address.

      SO you either need to put the PI in the Routers DMZ   or set up the router to forward the SSH port to the NAT'd address of the PI.

      B




      From: John Lawrence <ne3e001@...>
      To: Raspberry_Pi_4-Ham_RADIO@yahoogroups.com
      Sent: Saturday, April 27, 2013 11:05:54 AM
      Subject: Re: [Raspberry_Pi_4-Ham_RADIO] SHH > PI from WAN

       
      Can you assign a local address for the Pi in your router.
      In other words can you program DHCP in the router by assigning a local LAN address using the MAC  ( hardware address ) ?

      If you are unsure I can send you some screen shots of my router.
      NE3E


      On Sat, Apr 27, 2013 at 7:33 AM, w4jpa <abjarvis@...> wrote:
       
      I have a NO-IP static address that I want to use when we re-locate the PI based RMS gate to a better site. To PuTTY in from my desktop during development I gave the PI a local LAN static IP and all was well but;

      If I give my PI the NO-IP public static IP address I am then UNABLE to access it from the desktop PuTTY! with either new static address or it's old LAN address!

      Here's the odd thing; My Router's status window is currently showing its Public IP address as the NO-IP static one! Hmm!




      --
      John


    Your message has been successfully submitted and would be delivered to recipients shortly.