Loading ...
Sorry, an error occurred while loading the content.

Re: AW: [Raspberry_Pi_4-Ham_RADIO] Re: Powering the Raspberry & TNC.

Expand Messages
  • KG6YGC
    ... Check out the Samlex desktop switching power supplies. Excellent price point, 3 year warranty and no RFI!
    Message 1 of 53 , Apr 2, 2013
      On Apr 2, 2013, at 8:30, "siegfried jackstien" <siegfried.jackstien@...> wrote:

      A switcher that needs an adjustment to move the birdies away is not proper
      built ... a good switching psu has lots of filtering on input and output
      side and does not need any adjustment of the switching frequency

      Check out the Samlex desktop switching power supplies.  Excellent price point, 3 year warranty and no RFI!

    • Jim Thisdale
      F.Y.I. Most computer mother boards have switch mode regulators on the board to make all the various voltages needed for the processor(s), memory, north & south
      Message 53 of 53 , Apr 14, 2013

        Most computer mother boards have switch mode regulators on the board to make all the various
        voltages needed for the processor(s), memory, north & south bridges, and various other hardware.
        Gamer & enthusiasts boards often tout how many regulators/phases they have.

        As for radiation, most of the noise is from the leads & tracks on the board of chips themselves,
        especially when they are unshielded. A 5, 3.3, or even 1.8 volt signal toggling on-off at a high
        rate can radiate quite a bit, with 32 or 64 bits wide all toggling at such high clock rates it will
        radiate a lot of hash.... Computers tend to generate & radiate a lot of hash that's one reason the
        better made ones have metal cases and metal shielding in key areas. The minor amount of noise/ripple
        out of the supply is miniscule compared to the hash from the computer it-self. If a supply is truly
        that noisy the noise/spikes on the power would be mistaken for data and foul up the processing.

        -Jim- N1JMM, KB1YPL_B
        Visit my Pi running ircddb, dvrptr, Apache & many other things:

        On 4/7/13 6:15 AM, JJ wrote:
        > On 13-04-07 05:49 AM, John B. Cundiff Jr. wrote:
        >> Every time any digital device switches from off to on it produces a small spike and every spike
        >> as harmonics or RFI ... you can never completely clean up the supply of a computer ...you must
        >> design the computer
        >> to live with the spikes and RFI.
        >> On 04/07/13, Ray Wells<vk2tv@...> wrote:
        >> John,
        >> It's more than just spikes.
        >> The National Semiconductor recommendation to "tame" the output of the LM2596 smps is to add a
        >> series inductor (10mH from memory) and a shunt capacitor. Whilst this may very well result in a
        >> power supply that will "please" the Pi, it will do absolutely nothing to suppress RFI, which
        >> requires techniques quite different from those that produce a clean DC supply. The problem is not
        >> insurmountable but would require some devotion to produce a supply that is both DC and RF clean.
        >> It can be done.
        >> FWIW, the problem, from a Pi perspective, isn't necessarily spikes. Some smps's produce a distinct
        >> sawtooth output under load and whilst there may not be any spikes, there may well be dips below
        >> the minimum working voltage of the Pi at the bottom of the sawtooth waveform.
        >> Don't believe for one moment that you can assess a supply as being "good" with a voltmeter,
        >> digital or otherwise. It is indeed a case where a picture is worth a thousand words and that is
        >> where the CRO plays its part. If you don't have a hardware CRO, use a soundcard based device.
        >> There is plenty of free oscilloscope software available online.
        >> Ray vk2tv
        >> On 07/04/13 18:03, John B. Cundiff Jr. wrote:
        >>> Wood not a simple choke ...maybe a torridal choke
        >>> suppress the spikes every one is worried about .
        >>> Put a big value filter capacitor afterwards .
        >>> Be a lot more portable .. simpler and ..eleganter etc.
        >>> On 04/06/13, Kerry McKenzie<kermck@...> wrote:
        >>> Guys
        >>> a rarely dumb question?
        >>> how hard is it to just get an old pc power supply AT or ATX ,.... who
        >>> cares either way,... you will get between 15 and 50 amps at 5 volts and
        >>> throw a couple of caps across it.
        >>> If you crow it,... it will be smooth
        >>> if you go to any computer repair shop they will possible give you as
        >>> many old ones as you want as most of them still work.
        >>> i have 4 or 5 in my workshop down stairs and use them for all sorts of
        >>> things and it so easy.
        >>> my 2 cents worth.....Kerry
        >>> PS Linux is still a bitch and I,m going nowhere with my projects ;-((
        >>> --
        >>> Kind Regards
        >>> Kerry McKenzie
        >>> PO Box 4492
        >>> Kirwan QLD 4817
        >>> Australia
        > yes, I agree...I use a vp-1020 satellite card in my computer and the P.S. noise is affecting the
        > sensitivity of the card....my ham antennas are more than 100 feet from the house due to the rf
        > racket produced by many switching power supplies in the house...even the darn router and cable modem
        > supplies were awful, so running as much as I can directly from my solar system 12v rail...but there
        > are just so many things nowadays that use these switching supplies it's hard to eliminate them
        > all...oh, and then there's a neighbors samsung plasma tv .. 300 feet away from here and it wipes out
        > my packet system when it's on...
        > grr...
      Your message has been successfully submitted and would be delivered to recipients shortly.