Loading ...
Sorry, an error occurred while loading the content.

1248Re: ROS Frequency on 12m

Expand Messages
  • peter
    Feb 6, 2012
    • 0 Attachment
      Hello Paul,

      I still need more help. I don't have CAT enabled, but I don't see how to adjust the bandwidth setting. Most HF frequencies (except for one frequency on 40m and all 30m frequencies) default to 2000 and I can't see a way of changing it.

      Thanks,

      Peter



      --- In ROSDIGITALMODEMGROUP@yahoogroups.com, Phil Williams <ka1gmn@...> wrote:
      >
      > If you have CAT enabled in the ROS application, you will have to turn it
      > off to allow the selection of the ROS baud/bandwidth settings for 500KHz.
      > Then you are free to choose any of the baud/bandwidth setting independent
      > of actual operating frequency.
      >
      >
      >
      > On Sun, Feb 5, 2012 at 5:48 AM, peter <moosey@...> wrote:
      >
      > > **
      > >
      > >
      > > Hello Sigi,
      > >
      > > I like the sound of the suggested changes. However, I'm probably not the
      > > best person to ask as I do not have too much experience with the current
      > > various digital modes. I have only just returned to using digital modes
      > > after many years. When I was previously active "digital modes" usually
      > > meant CW or RTTY! There are quite a few different ones about now and they
      > > seem to be increasing in number each month.
      > >
      > > Having said that, I believe that the frequencies suggested are sensible
      > > according to the bandplans, and so any other comments would be welcome from
      > > those who use other digital modes that might be impacted.
      > >
      > > As an additional question, I currently have ROS v6.8.4. Can anyone tell me
      > > if it is possible to use this version for the ROS 500Hz modes, or is this
      > > one just for the 2000 Hz modes? I can't see how to configure it for 500Hz,
      > > so am I missing something or does it not support the narrow ROS mode?
      > >
      > > Thanks,
      > >
      > > Peter
      > >
      > > --- In ROSDIGITALMODEMGROUP@yahoogroups.com, "siegfried jackstien"
      > > <siegfried.jackstien@> wrote:
      > > >
      > > > Hello peter
      > > > I just wrote a mail to jose
      > > > Prepare for a new version :-)
      > > > The same is on 10m qrg ... so we should change them
      > > >
      > > > I searched for frequency were also unattended stations are allowed (cause
      > > > you can switch ros to beacon mode)
      > > >
      > > > What do you thing about that
      > > >
      > > > 24927 500hz
      > > > 24937 2000hz
      > > >
      > > > 28130 500hz
      > > > 28310 2000hz
      > > >
      > > > All 4 frequencies are also allowed to be used for unattended stations
      > > AND SO
      > > > YOU CAN USE THE BEACON FUNCTION!!!
      > > >
      > > > Unattended is not allowed without permission so you have to be close to
      > > the
      > > > rig .... (but nobody said you can not go to bed hi hi)
      > > >
      > > > What do others think about that qrg above???
      > > >
      > > > Dg9bfc
      > > > Sigi
      > > >
      > > > Ps if you prefer to use wider mode only then we should use them in the
      > > area
      > > > were it is allowed ...
      > > >
      > > > > -----Urspr√ľngliche Nachricht-----
      > > > > Von: ROSDIGITALMODEMGROUP@yahoogroups.com
      > > > > [mailto:ROSDIGITALMODEMGROUP@yahoogroups.com] Im Auftrag von peter
      > > > > Gesendet: Samstag, 4. Februar 2012 14:53
      > > > > An: ROSDIGITALMODEMGROUP@yahoogroups.com
      > > > > Betreff: [ROSDIGITALMODEMGROUP] ROS Frequency on 12m
      > > > >
      > > > >
      > > > >
      > > > > Can the authors of ROS please note that operation on 12m on 24.916 MHz
      > > is
      > > > > not in line with IARU bandplans. That part of the band is for narrow
      > > band
      > > > > modes only (up to 500Hz bandwidth).
      > > > >
      > > > > ROS8/2000 operating on 24.916 is not in accordance with the band plan
      > > and
      > > > > obliterates JT65 signals trying yo operate on 24.917. Could you please
      > > > > amend the program to remove the 24.916 frequency on 12m?
      > > > >
      > > > > Thanks,
      > > > >
      > > > > Peter
      > > > > G4DJB
      > > > >
      > > > >
      > > > >
      > > > >
      > > >
      > >
      > >
      > >
      >
      >
      >
      > --
      > Phil KA1GMN
      > Experimental Station - WF9XJD
      >
    • Show all 13 messages in this topic